VGR Electric Shaver V-390 User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your VGR Electric Shaver V-390. Please read this manual thoroughly before first use and retain it for future reference. This electric shaver is designed for personal grooming, offering a clean and confident appearance.

Important Safety Information

To reduce the risk of electric shock, injury, or damage to the appliance, always follow these basic safety precautions:

• Do not use this appliance near water, such as in bathtubs, showers, basins, or other vessels containing water.
• Ensure the shaver is clean and dry before and after each use.
• Avoid applying excessive pressure to the skin while shaving to prevent irritation.
• Always unplug the shaver from the power outlet before cleaning.
• Do not use the shaver if it is damaged, has a damaged cord or plug, or is not working properly. Contact customer support for assistance.
• Keep the appliance out of reach of children.

Package Contents

Verify that all items are present in the package:

• VGR Electric Shaver V-390
• USB Charging Cable
• Cleaning Brush
• Replacement Foil/Blade Cartridge

Setup

Initial Charging

Before using your VGR Electric Shaver V-390 for the first time, it is recommended to fully charge it.

1. Connect the small end of the USB charging cable to the charging port located at the bottom of the shaver.
2. Connect the larger end of the USB cable to a compatible USB power adapter (not included) or a computer USB port.
3. Allow the shaver to charge for approximately 1.5 hours for a full charge. The charging indicator light (if present) will typically change or turn off when fully charged.

Operating Instructions

Shaving

For optimal results, ensure your skin is clean and dry before shaving.

1. Press the power button to turn on the shaver.
2. Hold the shaver at a right angle (90 degrees) to your skin.
3. Gently stretch your skin with your free hand to make the hairs stand upright.
4. Move the shaver in short, circular motions or straight strokes against the direction of hair growth.
5. Do not press too hard; let the shaver do the work.
6. After shaving, press the power button again to turn off the shaver.

Maintenance

Cleaning the Shaver

Regular cleaning ensures optimal performance and hygiene.

1. Ensure the shaver is turned off and unplugged from any power source.
2. Remove the foil head by gently pulling it upwards.
3. Use the provided cleaning brush to brush away any accumulated hair from the foil and the inner cutting blades.
4. Do not use water to clean the internal components unless specified as waterproof. This model is not explicitly stated as wet/dry.
5. Reattach the foil head by aligning it and pressing down until it clicks into place.

Blade and Foil Replacement

For continued optimal shaving performance, it is recommended to replace the foil and blade cartridge every 6-12 months, depending on usage. A replacement cartridge is included in your package. To replace, simply remove the old foil head and snap the new one into place.

Charging

The VGR Electric Shaver V-390 features a powerful long-life motor and a rechargeable battery.

• Charging Time: Approximately 1.5 hours for a full charge.
• Use Time: Up to 2 hours of continuous operation on a full charge.
• Always use the provided USB cable for charging.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.