Introduction
This instruction manual provides detailed guidance for the safe and proper assembly, operation, and maintenance of your Perlegear PGTVS02 Tabletop TV Stand. Please read all instructions carefully before installation to ensure correct setup and to prevent damage or injury. Keep this manual for future reference.
Image: Front view of the Perlegear PGTVS02 Tabletop TV Stand, showcasing its black finish and tempered glass base.
Safety Information
Important Safety Instructions:
- Verify that your TV's weight and VESA pattern are within the stand's specifications before installation. This stand supports TVs from 23 to 60 inches, weighing up to 99 lbs (45 kg), with VESA patterns from 75x75mm to 400x400mm.
- Do not exceed the maximum load capacity. Overloading can result in serious injury or property damage.
- Ensure all screws are securely tightened before use. Do not overtighten screws to avoid stripping.
- Install the stand on a stable, level surface. Uneven surfaces can cause instability.
- Keep children and pets away from the assembly area. Small parts may be a choking hazard.
- If any parts are missing or damaged, do not attempt to assemble. Contact Perlegear customer support for assistance.
Image: Illustrates the Perlegear stand's wider base (16.8 inches) for enhanced stability compared to a narrower alternative (11.4 inches).
Product Features
- Sturdy Construction: Features a stable tempered-glass base and a reinforced metal frame for secure TV support. Includes safety screws to firmly attach the TV to the stand.
- Height Adjustable: Offers 9 height settings to position your TV at an optimal viewing level.
- Wide Compatibility: Designed for most 23''–60'' LCD, LED, and OLED TVs weighing up to 99 lbs (45 kg). Compatible with VESA mounting patterns ranging from 75x75mm to 400x400mm.
- Drill-Free Installation: Provides a simple setup process with included hardware and instructions, requiring no drilling.
- Integrated Cable Management: Helps organize and conceal cables for a tidy appearance.
Image: Illustrates the wide compatibility of the stand for TVs between 23 and 60 inches, along with supported VESA mounting patterns.
Package Contents
Please check to ensure all components are present and undamaged before beginning assembly. If any parts are missing or defective, please contact Perlegear customer support.
- Tempered Glass Base
- Support Column
- TV Mounting Plate
- TV Brackets (2 pcs)
- Hardware Kit (screws, washers, spacers, Allen key, wrench)
- Instruction Manual
Setup Instructions
Follow these steps carefully for a secure and stable installation.
1. Pre-Installation Checklist
- TV Size: Ensure your TV is between 23 and 60 inches.
- TV Weight: Confirm your TV weighs no more than 99 lbs (45 kg).
- VESA Pattern: Check the four mounting holes on the back of your TV. Measure the horizontal and vertical distance between them. This stand supports VESA patterns from 75x75mm to 400x400mm.
Image: A visual guide to identifying and measuring your TV's VESA mounting pattern (horizontal x vertical distance).
2. Assembly Steps
- Assemble the Base: Attach the support column to the tempered glass base using the provided screws and tools. Ensure it is firmly secured.
- Attach TV Mounting Plate: Secure the TV mounting plate to the top of the support column.
- Attach TV Brackets to TV: Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA holes. Attach the two TV brackets to the back of your TV. Ensure the brackets are level and securely fastened.
- Mount TV to Stand: Carefully lift your TV and hook the TV brackets onto the TV mounting plate. Secure the TV to the stand using the safety screws provided, typically located at the bottom of the TV brackets.
- Cable Management: Route your TV cables through the integrated cable management system on the support column to keep them organized and out of sight.
Image: Visual representation of the straightforward installation process, highlighting that assembly hardware and detailed instructions are included, and no drilling is required.
Image: Detailed view of the stand's base, showing security screws for TV attachment, the thick steel column, and non-slip pads for stability.
Operating Instructions
Height Adjustment
The Perlegear PGTVS02 stand offers 9 different height settings to optimize your viewing experience. To adjust the height:
- Ensure the TV is securely mounted to the brackets.
- With assistance, carefully lift the TV slightly to disengage it from its current height setting on the support column.
- Adjust the TV to the desired height by aligning the mounting holes on the brackets with the corresponding holes on the support column.
- Re-engage the safety screws to lock the TV in the new position. Always ensure the TV is stable after adjustment.
Image: Depicts a user enjoying a TV mounted on the stand, highlighting the ability to raise the TV to an ergonomic height with 9 available settings.
Cable Management
Utilize the integrated cable management clips or channels on the support column to route and conceal power cords and AV cables. This helps maintain a clean and organized entertainment area.
Maintenance
- Cleaning: Wipe the stand with a soft, dry cloth. For stubborn marks on the tempered glass, use a mild glass cleaner. Avoid abrasive cleaners or solvents.
- Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure. Re-tighten if necessary.
- Inspection: Inspect the stand for any signs of wear, damage, or instability. If any issues are found, discontinue use and contact customer support.
Troubleshooting
If you encounter any issues, refer to the following common problems and solutions:
- TV is not level: Ensure the TV brackets are installed evenly on the back of the TV and that the stand's base is on a level surface. Adjust as needed.
- Stand feels wobbly: Double-check that all screws are tightened according to the assembly instructions. Ensure the stand is placed on a firm, level surface.
- TV does not fit the stand: Verify your TV's size, weight, and VESA pattern against the specifications in this manual. If they do not match, the stand may not be compatible with your TV.
- Missing parts: Do not proceed with assembly. Contact Perlegear customer support immediately for replacement parts.
Specifications
| Specification | Detail |
|---|---|
| Model Number | PGTVS02 |
| Compatible TV Sizes | 23'' – 60'' |
| Maximum Load Capacity | 99 lbs (45 kg) |
| VESA Compatibility | 75x75mm, 100x100mm, 100x200mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm |
| Height Adjustment | 9 settings |
| Base Material | Tempered Glass |
| Column/Frame Material | Reinforced Metal |
| Product Dimensions | 2.72 x 9.53 x 17.56 inches (approximate, packaging) |
| Item Weight | 8.39 pounds |
Image: Detailed dimensions of the Perlegear PGTVS02 TV stand, including height, width, and base measurements.
Warranty and Support
Perlegear is committed to providing high-quality products. If you encounter any problems during installation or use, or if you have questions regarding your Perlegear PGTVS02 Tabletop TV Stand, please do not hesitate to contact our customer support team. We are available to assist you with any concerns.
For support, please visit the official Perlegear website or refer to the contact information provided with your purchase.
