1. Introduction
Thank you for purchasing the Lenco LS-55 Bluetooth Turntable. This manual provides essential information for the safe and correct operation of your device. Please read it thoroughly before use and retain it for future reference.
2. Safety Instructions
- Read all instructions carefully before operating the unit.
- Keep the unit away from water, moisture, and direct sunlight.
- Do not block any ventilation openings.
- Use only attachments/accessories specified by the manufacturer.
- Unplug the unit during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel.
3. Package Contents
Please check that all items listed below are present in your package:
- Lenco LS-55 Turntable Unit
- Dust Cover
- Felt Platter Mat
- 45 RPM Adapter
- AC Power Adapter
- Cleaning Cloth
- User Manual (this document)
4. Product Overview
Familiarize yourself with the components of your Lenco LS-55 turntable.
Figure 4.1: Top-down view of the Lenco LS-55 turntable with the dust cover open, showing the platter, tonearm, and control panel.
Figure 4.2: Angled view of the Lenco LS-55 turntable, highlighting its wooden finish and integrated speakers.
Figure 4.3: Detailed view of the control panel, including power, USB, Phono/AUX, Bluetooth buttons, and the volume knob.
Figure 4.4: Rear panel connections, including AUX IN, LINE OUT (RCA), and DC 9V power input.
Figure 4.5: Close-up of the turntable's stylus, essential for reading vinyl grooves.
5. Setup
- Unpacking: Carefully remove the turntable from its packaging. Retain all packing materials for future transport.
- Placement: Place the turntable on a stable, level surface away from direct heat sources, dust, and vibrations.
- Dust Cover: Attach the dust cover to the hinges at the back of the unit.
- Platter Mat: Place the felt platter mat onto the turntable platter.
- Power Connection: Connect the AC power adapter to the DC 9V input on the rear of the turntable and then plug it into a wall outlet.
- External Audio (Optional): If connecting to an external amplifier or speakers, use RCA cables (not included) to connect the LINE OUT ports on the turntable to the audio input on your external device.
6. Operating Instructions
6.1 Playing a Vinyl Record
- Power On: Press the 'POWER' button on the control panel to turn on the turntable.
- Select Mode: Press the 'PHONO/AUX' button to select the Phono mode.
- Place Record: Place a vinyl record on the platter. If playing a 45 RPM single, place the 45 RPM adapter on the spindle first.
- Select Speed: Adjust the speed selector switch (usually located near the tonearm base) to match the record's speed (33, 45, or 78 RPM).
- Lift Tonearm: Gently lift the tonearm using the cueing lever.
- Position Tonearm: Move the tonearm over the desired starting groove of the record.
- Lower Tonearm: Slowly lower the tonearm using the cueing lever. The stylus will make contact with the record, and playback will begin.
- Adjust Volume: Rotate the 'VOLUME' knob to adjust the sound level.
- Auto-Stop Feature: The turntable features an auto-stop function that automatically stops the platter rotation when the record finishes playing.
- End Playback: At the end of the record, or when you wish to stop, lift the tonearm using the cueing lever and return it to the tonearm rest.
6.2 Bluetooth Connection
The Lenco LS-55 can receive audio wirelessly from a Bluetooth-enabled device.
- Power On: Ensure the turntable is powered on.
- Select Bluetooth Mode: Press the 'BLUETOOTH' button on the control panel. The Bluetooth indicator light will flash, indicating it's in pairing mode.
- Enable Bluetooth on Device: On your smartphone, tablet, or other Bluetooth audio device, enable Bluetooth and search for available devices.
- Pair: Select 'Lenco LS-55' from the list of found devices. Once paired, the Bluetooth indicator light on the turntable will stop flashing and remain solid.
- Play Audio: You can now play audio from your connected device through the turntable's speakers.
6.3 USB Recording (MP3 Encoding)
You can record your vinyl records directly to a USB flash drive in MP3 format.
- Insert USB Drive: Insert a USB flash drive into the USB port on the control panel.
- Select Phono Mode: Ensure the turntable is in Phono mode (playing a record).
- Start Recording: Press the 'RECORD' button. The recording indicator will illuminate.
- Play Record: Start playing your vinyl record as described in section 6.1. The turntable will record the audio to the USB drive.
- Stop Recording: Press the 'RECORD' button again to stop the recording. The recording indicator will turn off.
- Playback USB: To play back recorded MP3s, press the 'USB' button to switch to USB mode. Use the track navigation buttons (◀◀ / ▶▶) to select tracks and the play/pause button (▶/██) for playback control.
7. Maintenance
7.1 Cleaning the Unit
- Wipe the dust cover and cabinet with a soft, slightly damp cloth. Do not use abrasive cleaners or solvents.
- Use the provided cleaning cloth to gently wipe the platter and other surfaces.
7.2 Stylus Care
- The stylus is delicate. Handle it with extreme care.
- Clean the stylus regularly using a soft brush, brushing gently from back to front.
- A worn stylus can damage records and produce poor sound quality. Replace the stylus after approximately 300-500 hours of use.
8. Troubleshooting
If you encounter issues with your Lenco LS-55, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power adapter not connected; Power outlet not active. | Ensure the power adapter is securely connected to the unit and a working wall outlet. |
| No sound or low volume | Volume too low; Incorrect input mode selected; External speakers not connected/powered. | Increase volume. Select correct input mode (Phono, Bluetooth, USB, AUX). Check external speaker connections and power. |
| Skipping or distorted sound | Record is dirty or damaged; Stylus is dirty or worn; Turntable not level. | Clean the record. Clean or replace the stylus. Ensure the turntable is on a level surface. |
| Bluetooth pairing failure | Turntable not in pairing mode; Device too far; Interference. | Ensure turntable is in Bluetooth pairing mode (flashing indicator). Move device closer. Reduce interference from other wireless devices. |
| USB recording not working | USB drive full or incompatible format; Turntable not in Phono mode. | Ensure USB drive has sufficient space and is formatted correctly (FAT32). Confirm Phono mode is selected before recording. |
If the problem persists after trying these solutions, please contact customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Lenco |
| Model Number | LS-55WA |
| Color | Brown |
| Material | Wood |
| Connections | USB, AUX In, Line Out (RCA) |
| Special Features | Portable, Wireless (Bluetooth), MP3 Encoding |
| Compatible Devices | Personal Computer (for USB encoding), Bluetooth Audio Devices |
| Maximum Rotation Speed | 78 RPM (supports 33, 45, 78 RPM) |
| Item Weight | 4.5 Kilograms |
| Power Output | 2 x 5 Watt RMS (Integrated Speakers) |
10. Warranty Information
Lenco products are designed and manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the warranty card included with your product or visit the official Lenco website.
11. Support
For technical assistance, product inquiries, or service requests, please contact Lenco customer support. Contact information can typically be found on the official Lenco website or in the documentation provided with your product.
Website: www.lenco.com
