Introduction
Thank you for purchasing the beFree Sound BFS-5.1 5.1 Channel Surround Sound Bluetooth Speaker System. This manual provides essential information for the proper setup, operation, and maintenance of your new audio system. Please read it thoroughly before use and retain it for future reference.
What's in the Box
Carefully unpack all components and ensure you have received the following items:
- One (1) 4-inch Amplifier/Subwoofer Unit
- Five (5) 2.75-inch Satellite Speakers
- One (1) Remote Control (batteries not included)
- Audio Connection Cables (RCA to RCA, RCA to 3.5mm)
- Power Cable
Image: Remote control and included audio cables.
Setup
Follow these steps to correctly set up your beFree Sound 5.1 Channel Surround Sound Speaker System.
1. Speaker Placement
For optimal surround sound experience, position the satellite speakers as follows:
- Front Left (FL) & Front Right (FR): Place these speakers to the left and right of your viewing area, facing the listener.
- Center (CEN): Position this speaker directly above or below your display (TV/monitor).
- Surround Left (SL) & Surround Right (SR): Place these speakers to the sides or slightly behind the listening position.
- Subwoofer (SW): The subwoofer can be placed anywhere in the room, typically on the floor near the front speakers.
Image: Overview of the beFree Sound 5.1 speaker system components.
2. Connecting the Speakers
Connect the satellite speakers to the corresponding output ports on the rear panel of the subwoofer/amplifier unit. Ensure each speaker cable is securely connected to its designated port (FL, FR, CEN, SL, SR, SW).
3. Audio Input Connection
Connect your audio source (e.g., TV, DVD player, computer) to the subwoofer/amplifier using the appropriate audio input cables. The system supports AUX audio input (stereo RCA) and DVD audio input (5.1 channel RCA).
4. Power Connection
Once all audio and speaker connections are made, connect the power cable to the AC IN port on the subwoofer/amplifier and then plug it into a standard electrical outlet.
Image: Rear panel connections of the subwoofer unit.
Operating Instructions
This section details how to operate your beFree Sound speaker system using the front panel controls and the remote control.
Front Panel Controls
Image: Front panel display and controls of the subwoofer.
- Power Switch: Located on the rear panel to turn the unit completely off/on.
- Standby Button: On the front panel, toggles between standby and active mode.
- Input/Mode Button: Cycles through available input sources (Bluetooth, USB, SD, FM, AUX, DVD).
- Volume Knob: Adjusts the master volume level.
- USB/SD Card Slots: For direct playback of audio files from USB drives or SD cards.
Remote Control Functions
Image: Detailed view of the remote control.
- Power Button (Red): Turns the system on or off (standby).
- Input Selection (SD, USB, FM, AUX, BT, DVD): Directly select the desired audio source.
- 5.1/2.1 Button: Toggles between 5.1 channel and 2.1 channel output modes.
- Volume (+/-): Adjusts the master volume.
- Speaker Level Adjustment (FL+, FL-, FR+, FR-, CEN+, CEN-, SW+, SW-, SL+, SL-, SR+, SR-): Fine-tune the volume of individual speakers.
- Playback Controls (Play/Pause, Previous, Next): For USB/SD/Bluetooth modes.
- TUNE+/TUNE- (FM Mode): Adjusts FM radio frequency.
- AUTO (FM Mode): Automatically scans and saves FM radio stations.
- EQ: Cycles through equalizer presets.
- DISP: Adjusts display brightness or mode.
- SLEEP: Sets a sleep timer.
Bluetooth Pairing
- Turn on the speaker system and select 'BT' (Bluetooth) mode using the front panel button or remote. The display will show 'BT' and flash, indicating it's in pairing mode.
- On your Bluetooth-enabled device (smartphone, tablet, computer), go to the Bluetooth settings.
- Search for available devices and select 'beFree Sound' or a similar name.
- Once paired, the system will emit a confirmation sound, and the 'BT' indicator will stop flashing. You can now play audio from your device through the speaker system.
USB/SD Playback
- Insert a USB flash drive or SD card (with compatible audio files) into the respective slot on the front panel.
- The system should automatically switch to USB or SD mode and begin playback. If not, select 'USB' or 'SD' mode using the front panel or remote.
- Use the playback controls on the remote or front panel to manage your music.
FM Radio Operation
- Select 'FM' mode using the front panel or remote.
- Press the 'AUTO' button on the remote to automatically scan and save available FM stations.
- Use the 'TUNE+' or 'TUNE-' buttons to manually tune to a specific frequency or cycle through saved stations.
Maintenance
Proper care ensures the longevity and optimal performance of your speaker system.
- Cleaning: Use a soft, dry cloth to clean the surfaces of the speakers and subwoofer. Do not use liquid cleaners or abrasive materials.
- Placement: Avoid placing the system in direct sunlight, near heat sources, or in areas with high humidity. Ensure adequate ventilation around the subwoofer.
- Power: Disconnect the power cable from the wall outlet if the system will not be used for an extended period.
Troubleshooting
If you encounter issues with your speaker system, refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| No power | Ensure the power cable is securely connected to both the unit and the wall outlet. Check the power switch on the rear panel and the standby button on the front panel/remote. |
| No sound | Verify the correct input source is selected. Check all audio cable connections. Increase the master volume and individual speaker levels. Ensure the system is not muted. |
| Bluetooth pairing fails | Ensure the system is in 'BT' mode and flashing. Make sure your device's Bluetooth is on and within range. Try unpairing and re-pairing the device. |
| USB/SD playback not working | Ensure the USB drive/SD card is inserted correctly and contains compatible audio files. Select 'USB' or 'SD' mode. Try a different USB drive/SD card. |
| Poor FM reception | Extend the FM antenna fully. Reposition the antenna for better signal. |
| Remote control not working | Check and replace the batteries. Ensure there are no obstructions between the remote and the system's IR receiver. |
Specifications
| Model Name | BFS-5.1 Surround Sound Speaker System |
| Output Power | 20W (Subwoofer) + 5W x 5 (Satellite Speakers) |
| Frequency Response | 40Hz - 20KHz |
| Separation | >=50dB |
| Signal-to-Noise Ratio (S/N) | >=75dB |
| Speaker Type | 5.1 Channel Surround Sound |
| Subwoofer Diameter | 5.25 Inches |
| Satellite Speaker Size | 2.75 Inches |
| Connectivity Technology | Bluetooth, USB, SD, FM Radio, AUX (RCA), DVD (RCA) |
| Control Method | Remote Control, Front Panel Buttons |
| Power Source | Corded Electric (AC 110V, 60Hz) |
| Product Dimensions (Subwoofer) | 11 x 21 x 15.5 inches (approximate) |
| Item Weight | 12.03 pounds (5.47 Kilograms) |
| Color | Black |
Warranty Information
This beFree Sound product comes with a limited warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Retain your proof of purchase for any warranty claims.
Customer Support
For further assistance, technical support, or inquiries regarding your beFree Sound BFS-5.1 speaker system, please contact beFree Sound customer service. Contact information can typically be found on the product packaging or the official beFree Sound website.
