Introduction
Thank you for purchasing the beFree Sound BFS-Shelf Speaker Bluetooth LED Dancing Water Multimedia Speakers. This manual provides essential information for the safe and efficient operation of your new speakers. Please read it thoroughly before use and retain it for future reference.
These speakers combine clear audio output with dynamic LED lighting and dancing water effects, enhancing your listening experience.
Package Contents
Ensure all items are present in the package:
- 2 x beFree Sound Dancing Water Speakers
- 1 x 6-foot USB Power Cable
- 1 x 6-foot 3.5mm Audio Cable
Product Overview
Familiarize yourself with the components of your beFree Sound speakers.
Image: Front view of two beFree Sound dancing water speakers, showcasing the active LED lights and water jets.
Image: Rear panel of a beFree Sound speaker, detailing the DC 5V power input, AUX input, USB port, and control buttons.
Controls and Ports:
- DC 5V Input: For power connection via USB cable.
- AUX Input: For wired audio connection using the 3.5mm audio cable.
- USB Port: For connecting to a power source or audio source (if supported by device).
- Power/Mode Button: Turns the speakers on/off and switches between input modes.
- Volume Controls: Adjusts the audio output level.
- LED Indicator: Shows power status and Bluetooth pairing status.
Setup Instructions
1. Power Connection:
- Connect the small end of the provided USB power cable to the DC 5V port on the back of the main speaker.
- Connect the standard USB end of the cable to a USB power adapter (not included) or a powered USB port on a computer.
- Ensure the power source provides 5V DC.
2. Speaker Interconnection:
- Connect the secondary speaker to the main speaker using the integrated audio cable extending from the secondary speaker. This cable typically plugs into a dedicated output port on the main speaker.
Image: Side view of the two speakers, illustrating the cable connection between them.
3. Initial Power On:
- Press and hold the Power/Mode button on the main speaker until the LED indicator lights up.
- The speakers will typically enter Bluetooth pairing mode automatically upon first power-on, indicated by a flashing LED.
Operating Instructions
Bluetooth Connection:
- Ensure the speakers are powered on and in Bluetooth pairing mode (LED indicator flashing).
- On your audio device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "beFree Sound" or a similar name from the list of devices.
- Once connected, the LED indicator will typically stop flashing and remain solid.
- You can now play audio wirelessly from your device.
AUX (Wired) Connection:
- Connect one end of the 3.5mm audio cable to the AUX input port on the main speaker.
- Connect the other end of the 3.5mm audio cable to the headphone jack or audio output port of your audio device.
- Press the Power/Mode button to switch to AUX input mode if the speakers do not automatically detect the wired connection.
Volume Control:
- Use the volume control buttons on the speaker to adjust the output volume.
- You can also control the volume from your connected audio device.
LED Lights and Dancing Water:
The speakers feature integrated LED lights and water jets that react to the audio being played. This effect is automatic and does not require separate activation.
Image: The beFree Sound speakers in an ambient setting, demonstrating the visual effect of the LED lights and dancing water.
Maintenance and Care
- Cleaning: Use a soft, dry cloth to wipe the exterior of the speakers. Do not use abrasive cleaners or solvents.
- Water: The speakers contain water for the dancing effect. They are designed to be leak-proof, but avoid tilting or shaking them excessively. The product is not water resistant externally; do not expose to splashes or immerse in water.
- Storage: Store the speakers in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the speakers with care to prevent damage to the internal components or the water chamber.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected properly; USB power source not active. | Ensure USB cable is securely connected to both speaker and power source. Verify power source is active. |
| No sound | Volume too low; incorrect input mode; device not connected; audio cable faulty. | Increase speaker and device volume. Press Mode button to select correct input (Bluetooth/AUX). Re-pair Bluetooth or re-connect AUX cable. Test with a different audio cable if using AUX. |
| Bluetooth not pairing | Speakers not in pairing mode; device Bluetooth off; too far from speakers. | Ensure speakers are flashing LED (pairing mode). Turn device Bluetooth off and on. Move device closer to speakers (within 10 meters). |
| Water not dancing or lights not working | No audio playing; audio volume too low. | Ensure music is playing and volume is sufficiently high for the effects to activate. |
Specifications
| Model Name | BFS-Shelf Speaker |
| Brand | beFree Sound |
| Speaker Type | Multimedia |
| Connectivity Technology | Bluetooth, USB |
| Wireless Communication Technology | Bluetooth |
| Power Source | Corded Electric (DC 5V via USB) |
| Speaker Maximum Output Power | 12 Watts |
| Frequency Response | 220Hz - 13000Hz |
| Impedance | 4 Ohm |
| Product Dimensions | 8.5"D x 6"W x 3"H |
| Item Weight | 1.52 Pounds |
| Material | Plastic |
| Water Resistance Level | Not Water Resistant (internal water for effect only) |
| LED Water Jets | 5 per speaker |
Warranty and Support
The beFree Sound BFS-Shelf Speaker comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or contact beFree Sound customer service directly.
Please visit the official beFree Sound website for the most up-to-date support information.
