Introduction
This manual provides essential information for the proper use, installation, and maintenance of your LIVLOV V11 Heart Rate Monitor Armband Replacement. This soft strap is designed to replace the original armband for various optical heart rate monitors, ensuring comfort and secure fit during physical activities.
Product Overview and Package Contents
The LIVLOV V11 replacement armband is a soft, breathable, and lightweight strap designed for comfort and durability. It features a Velcro design for easy adjustment and secure attachment.
Image: Two LIVLOV V11 replacement armbands, one in black and one in orange, showcasing their design and texture.
Package Contents:
- 1 x Black Replacement Armband
- 1 x Orange Replacement Armband
Image: Visual representation of the armband's material properties, including high elasticity, good wear resistance, anti-wrinkle, softness, skin affinity, breathability, and health benefits.
Compatibility
The LIVLOV V11 armband replacement is designed for heart rate monitors with a 22mm width. Please verify the width of your heart rate sensor before purchase.
Compatible Devices (22mm width):
- LIVLOV V9 Armband Heart Rate Monitor
- Polar Verity Sense Optical Heart Rate Monitor Armband
- Wahoo TICKR FIT Heart Rate Monitor Armband
- Powr Labs Bluetooth Heart Rate Monitor Armband
- FITCENT Optical Armband Heart Rate Monitor
- VorTec Bluetooth ANT+ Heart Rate Monitor Arm
- smartLAB Heart Rate Sensor Arm Band
- XOSS Heart Rate Monitor
- Echelon Armband Heart Rate Monitor
- Moofit Rechargeable Heart Rate Band
- Coospo
Not Compatible With:
- Orange Theory Heart Rate Monitor Strap (OTF, OTBeat Burn)
- Polar OH1 Armband
- Scosche Rhythm24 and Rhythm+ 2.0 Arm Band Heart Rate Sensor
- Other HR sensors less than 22mm wide
Image: A detailed compatibility chart indicating various heart rate monitors and their corresponding armband widths, highlighting which devices are compatible with 22mm bands.
Setup and Installation
To install the replacement armband, simply thread your compatible heart rate monitor sensor through the loops on the strap. The Velcro fasteners allow for easy attachment and removal of the sensor.
Image: A diagram illustrating the adjustable length of both the black and orange armbands, confirming their consistent 22mm width.
Wearing Instructions
For accurate heart rate monitoring and comfort, wear the armband on the upper part of your forearm. The heart rate sensor should be positioned on the inside or top of your forearm.
Ensure the strap is snug enough to prevent movement during activity, but not so tight that it restricts blood circulation in your arm. A comfortable, secure fit is key for optimal performance.
Image: Illustration of proper armband placement on the upper forearm during exercise, emphasizing the importance of a snug yet comfortable fit to avoid restricting circulation.
Care and Maintenance
The LIVLOV V11 armband is sweatproof and easy to clean. After use, especially after intense workouts, it is recommended to gently hand wash the strap with mild soap and water. Rinse thoroughly and allow it to air dry completely before storing or re-using.
Avoid using harsh chemicals or abrasive materials for cleaning, as this may damage the fabric and affect its elasticity and comfort.
Image: The armband is shown with an "IP67 Waterproof and Sweatproof" rating, illustrated by a person running in the rain, highlighting its suitability for various weather conditions and ease of cleaning.
Troubleshooting
Issue: Armband feels uncomfortable or causes skin irritation.
- Solution: Ensure the armband is not worn too tightly. It should be snug but not restrictive. If irritation persists, ensure the armband is clean and dry before each use. If skin sensitivity is a concern, discontinue use and consult a healthcare professional.
Issue: Heart rate monitor sensor is not secure or moves during activity.
- Solution: Re-adjust the Velcro fasteners to achieve a tighter fit. Ensure the sensor is correctly inserted into the armband's designated slot. Verify that your heart rate monitor's width is indeed 22mm, as incompatible sizes may lead to a loose fit.
Specifications
| Product Name | LIVLOV V11 Heart Rate Monitor Armband Replacement |
| Model | V11 |
| Material | Soft, breathable, sweatproof fabric |
| Armband Width | 22mm |
| Adjustable Length (Black) | 400mm (L) x 22mm (W) x 3.2mm (H) |
| Adjustable Length (Orange) | 355mm (L) x 22mm (W) x 3.2mm (H) |
| Water Resistance | IP67 (Waterproof and Sweatproof) |
| Package Weight | 68 grams |
| Manufacturer | LIVLOV |
Warranty and Support
LIVLOV offers a risk-free service. If the replacement soft strap does not fit your heart rate monitor as expected, please contact LIVLOV customer support for assistance. They can provide a full refund or further guidance.
For support inquiries, please refer to the contact information provided with your product packaging or visit the official LIVLOV website.
