BANDAI Lightning Striker Pack for Aile Strike Gundam Ver.RM (MG) Instruction Manual

1. Introduction

Thank you for purchasing the BANDAI Lightning Striker Pack expansion set. This product is designed to be attached to the Master Grade (MG) Aile Strike Gundam Ver.RM (sold separately) to recreate the Lightning Strike Gundam Ver.RM. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your model kit. Please read these instructions thoroughly before beginning assembly.

2. Safety Information

• Small Parts Warning: This product contains small parts and is not suitable for children under 8 years of age due to choking hazards. Adult supervision is recommended during assembly.
• Sharp Edges: Some parts may have sharp edges or points. Handle with care to prevent injury.
• Tools: Assembly may require hobby tools such as nippers, a hobby knife, and tweezers. Use these tools responsibly and keep them out of reach of children.
• Material: The model is made of PVC. Do not expose to extreme heat or open flames.

3. Package Contents

Verify that all components are present before starting assembly. The Lightning Striker Pack expansion set includes the following parts:

Figure 3.1: All components of the Lightning Striker Pack laid out for inspection. This includes the main backpack unit, two large wing-like thruster units, two smaller arm-mounted units, and a flexible wire for detailing.

• Main Lightning Striker Pack backpack unit
• Two (2) large thruster/weapon units
• Two (2) arm-mounted weapon units
• Flexible wire for energy conduit detailing
• Instruction sheet (this document)

Note: The Aile Strike Gundam Ver.RM model kit is sold separately and is required for full assembly and display.

4. Assembly Instructions

Follow these steps carefully to assemble the Lightning Striker Pack and attach it to your Aile Strike Gundam Ver.RM.

4.1. Preparation

1. Ensure your Aile Strike Gundam Ver.RM (MG) is fully assembled and ready for the expansion pack.
2. Carefully remove all parts from their runners using a pair of hobby nippers. Trim any excess plastic (nubs) with a hobby knife or sanding stick for a clean finish.
3. Organize the parts according to the diagrams in the original product manual (if applicable) and this guide.

4.2. Assembling the Lightning Striker Pack Components

Assemble the individual components of the Lightning Striker Pack as indicated in the detailed diagrams provided in the physical instruction sheet. Pay close attention to part orientation and connection points.

4.3. Attaching the Pack to Aile Strike Gundam Ver.RM

1. Locate the connection points on the back of the Aile Strike Gundam Ver.RM.
2. Carefully align the main Lightning Striker Pack backpack unit with these connection points and firmly press it into place until it clicks securely.
3. Attach the two large thruster/weapon units to the designated ports on the main backpack unit.
4. Attach the two arm-mounted weapon units to the forearms of the Aile Strike Gundam.
5. Integrate the flexible wire for energy conduit detailing as shown in the diagrams, connecting it between the relevant parts.

Figure 4.1: Front view of the Aile Strike Gundam Ver.RM with the Lightning Striker Pack fully attached, showcasing the enhanced profile.

Figure 4.2: Rear view of the Aile Strike Gundam Ver.RM, highlighting the intricate details and secure attachment of the Lightning Striker Pack.

Figure 4.3: The Aile Strike Gundam Ver.RM, equipped with the Lightning Striker Pack and its primary weapon, posed dynamically on an action base (sold separately).

Figure 4.4: A dynamic rear view of the Aile Strike Gundam Ver.RM, demonstrating the Lightning Striker Pack's ability to support aerial poses and enhance the model's overall presence.

5. Operation and Features

The Lightning Striker Pack enhances the Aile Strike Gundam Ver.RM with additional weaponry and mobility features. The design allows for transformation into the Lightning Strike Gundam Ver.RM configuration, offering various display options.

• Poseability: The attached pack maintains the high poseability of the MG Aile Strike Gundam. Carefully adjust joints to achieve desired poses.
• Transformation: Refer to the detailed diagrams in the physical instruction sheet for specific steps on transforming the pack into its various configurations, including the Lightning Strike Gundam Ver.RM mode.
• Display: For dynamic aerial poses, utilize an action base (sold separately) that is compatible with Master Grade Gundam models.

6. Maintenance

Proper care will ensure the longevity and appearance of your model kit.

• Cleaning: Dust the model regularly with a soft brush or a can of compressed air. Avoid using harsh chemicals or abrasive materials, which can damage the plastic.
• Handling: Always handle the model by its main body. Avoid gripping small or delicate parts, as they may break or detach.
• Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration and material degradation.
• Joint Care: If joints become loose over time, a small amount of clear nail polish or hobby-grade joint tightener can be applied to the ball joints and allowed to dry to restore friction.

7. Troubleshooting

If you encounter any issues during assembly or display, consider the following common solutions:

• Parts Not Fitting: Double-check the instruction diagrams to ensure correct part orientation. Sometimes, a small amount of plastic may need to be trimmed from a peg or hole for a snug fit. Do not force parts together.
• Loose Joints: Refer to the 'Joint Care' section under Maintenance for solutions to loose joints.
• Missing Parts: Carefully re-check the runners and packaging. If a part is genuinely missing, contact BANDAI customer support with your product information.
• Breakage: If a part breaks, hobby-grade plastic cement can often be used for repair. For delicate or load-bearing parts, consider contacting customer support for replacement options.

8. Specifications

9. Warranty and Support

BANDAI products are manufactured to high-quality standards. In the unlikely event of a manufacturing defect or if you require assistance with your product, please contact BANDAI customer support. Keep your proof of purchase for warranty claims.

For further assistance, please visit the official BANDAI website or contact their customer service department through the contact information provided on the product packaging or their official website.