Introduction
Thank you for purchasing the LITFAD 47-inch Oblong LED Flushmount Ceiling Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image: The LITFAD 47-inch Oblong LED Flushmount Ceiling Light, featuring a sleek coffee-colored base and warm LED illumination, installed flush against a ceiling in a modern living space.
Safety Information
To ensure safe installation and operation, please observe the following precautions:
- For a safe and secure installation, ensure that the electrical box to which this fixture will be mounted is properly attached to a structural member of the building.
- All wires are connected. When unpacking, be careful not to pull with wires as a bad connection may result.
- Do not connect electricity until your fixture is fully assembled.
- To reduce the risk of fire, electrical shock, or personal injury, always turn off and unplug the fixture and allow it to cool prior to replacing the light bulb (though this fixture uses integrated LEDs, this general safety rule applies to any electrical work).
- Do not touch the bulb when the fixture is turned on or look directly at the lit bulb. Keep flammable materials away from the lit bulb.
- Consult a qualified electrician if you are unsure about any part of the installation process.
Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact customer support.
- LITFAD 47-inch Oblong LED Flushmount Ceiling Light Fixture (with integrated LED)
- Mounting Hardware (screws, wire nuts, mounting bracket)
- User Manual
Specifications
| Brand | LITFAD |
| Model Number | LT722176CXLN |
| Fixture Type | Close to Ceiling Light / Flushmount |
| Style | Modern / Simple / Creative |
| Dimensions (L x W x H) | 47" (120 cm) x 3.5" (9 cm) x 1.5" (4 cm) |
| Material | Metal + Acrylic |
| Color | Coffee |
| Light Source Type | Integrated LED |
| Bulb Base | SMD |
| Wattage | 46W |
| Voltage | AC110-120V |
| Light Color | Warm Light |
| Room Type | Bedroom, Dining Room, Living Room, Hotel, Corridor |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Control Method | Touch (Implies standard wall switch control) |
| Mounting Type | Ceiling Mount |
Setup and Installation
Before You Begin:
- Turn off power at the circuit breaker or fuse box to avoid electrical shock.
- Ensure you have all necessary tools (screwdriver, wire strippers, electrical tape, ladder).
- Review the safety information section.
Installation Steps:
- Prepare the Mounting Surface: Ensure the electrical box is securely mounted to a structural member of the ceiling.
- Attach Mounting Bracket: Secure the fixture's mounting bracket to the electrical box using the provided screws.
- Make Electrical Connections:
- Connect the black wire from the fixture to the black (hot) wire from the electrical box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the electrical box using a wire nut.
- Connect the ground wire (bare copper or green) from the fixture to the ground wire from the electrical box and to the mounting bracket using a ground screw.
- Carefully tuck all wires into the electrical box.
- Secure the Fixture: Align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the ceiling.
- Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
Image: A detailed view of the ceiling light's design, showing the acrylic diffuser and the coffee-colored metal frame, indicating its flush-mount nature.
Operating Instructions
This LITFAD LED Flushmount Ceiling Light is designed for simple operation via a standard wall switch.
- Ensure the light fixture is correctly installed and power is restored to the circuit.
- Use the wall switch connected to the fixture to turn the light ON or OFF.
The integrated LED provides a consistent warm light output.
Image: The ceiling light installed in a hallway, demonstrating its ability to provide ambient lighting in a narrow space, complementing contemporary decor.
Maintenance
The LITFAD LED Flushmount Ceiling Light requires minimal maintenance.
- Cleaning: Before cleaning, ensure the power to the fixture is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic.
- LEDs: The LED light source is integrated and designed for a long lifespan. It is not user-replaceable. If the LED fails, the entire fixture may need to be replaced.
Image: A close-up shot revealing the smooth acrylic diffuser and the precise fit of the coffee-colored metal housing, emphasizing the quality of materials and construction.
Troubleshooting
If you encounter issues with your ceiling light, refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Light does not turn on. |
|
| Light flickers or dims. |
|
| Fixture is damaged. |
|
Warranty and Support
This LITFAD ceiling light comes with a 2-year warranty from the date of purchase, covering manufacturing defects.
For any questions, suggestions, or assistance regarding your product, please do not hesitate to contact LITFAD customer support. We are committed to providing prompt assistance.
You can find more information or contact support by visiting the LITFAD Store on Amazon.