1. Product Overview
The Roborock Multi-Surface Floor Solution is a concentrated cleaning agent designed for use with Roborock robotic vacuums and vacuum mops. This solution is formulated to effectively remove dirt, grime, and tough messes from various sealed hard floor surfaces, leaving a fresh and clean scent.
Image: Front view of the Roborock Multi-Surface Floor Solution bottle.
2. Safety Information
- Keep out of reach of children.
- WARNING: EYE IRRITANT. Read warnings on back panel.
- CONTAINS (BENZISOTHIAZOLINONE). MAY CAUSE AN ALLERGIC SKIN REACTION.
- Do not swallow. Do not get in eyes.
- If swallowed, call a Poison Control Center or doctor immediately.
- If in eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- If eye irritation persists, get medical advice/attention.
- If on skin, rinse well with water.
- Do not mix with bleachers and other cleaning products.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
3. Ingredients
The solution contains: nonionic surfactants, detergent builder, fragrance, colorant, and benzisothiazolinone.
It features a fresh scent and is formulated with plant-derived cleaning agents and tea tree essential oil.
4. Compatibility
This Roborock Multi-Surface Floor Solution is designed for use with all Roborock robotic vacuums with mopping functionality, including:
- Q5/Q7/Q8/S7/S8/Qrevo series
- Vacuum mops such as Dyad/Flexi series, Cordless
Important: This product is compatible with Roborock products only.
Image: Roborock Floor Cleaner bottle shown with various compatible Roborock cleaning devices.
5. Usage Instructions
5.1 Dilution Ratio
The Roborock Floor Cleaner is a concentrate and must be diluted before use. The recommended dilution ratio is 1:300. This means you should mix 1 part Roborock Floor Cleaner with 300 parts water.
For practical application, mix approximately 3 milliliters (1/3 of a capful) of solution with 1 liter of water.
Image: Visual guide for diluting the cleaning solution.
5.2 Application Methods
- For Roborock models with a solution cartridge: Pour the undiluted solution directly into the solution cartridge. The device will automatically dispense and mix it as needed.
- For Roborock models without a solution cartridge (e.g., older models or those requiring manual tank filling): Dilute the solution in the clean water tank of your device according to the 1:300 ratio (e.g., 3ml solution per 1L water).
Always refer to your specific Roborock device's manual for detailed instructions on filling and using cleaning solutions.
6. Product Features
- Effective Cleaning: Removes tracked-in dirt, tough pet messes, and grime from sealed hard floors.
- Multi-Surface Use: Suitable for general hard surfaces including walls, hard floors, tiles, granite, cabinets, drawers, countertops, and furniture (use as directed).
- Fresh Scent: Ingredients leave a long-lasting fresh and clean scent.
- Concentrated Formula: High dilution ratio ensures long-lasting use from a single bottle.
- Plant-Derived: Formulated with plant-derived cleaning agents and tea tree essential oil.
Image: Roborock Floor Cleaner highlighting its suitability for various hard floor types.
Image: Demonstrating the solution's ability to remove dirt, grime, and sticky messes.
7. Specifications
| Product Name | Roborock Multi-Surface Floor Solution |
| Item Model Number | Floor Cleaning Solution |
| Brand | roborock |
| Item Form | Liquid Concentrate |
| Scent | Fresh |
| Specific Uses | Floor cleaning (sealed hard floors) |
| Volume | 16.2 oz (480ml) |
| Product Dimensions | 4 x 2 x 9 inches |
| Weight | 1 Pound |
| Material Feature | Biodegradable |
8. Maintenance & Troubleshooting
This product is a cleaning solution and does not require maintenance itself. For optimal performance of your Roborock device, regularly clean its water tanks, filters, and mopping pads as instructed in your device's user manual.
If you experience issues with your Roborock device while using this solution, refer to your device's troubleshooting guide. Ensure the correct dilution ratio is always used to prevent residue buildup or insufficient cleaning.
9. Warranty & Support
For product support or warranty information regarding the Roborock Multi-Surface Floor Solution, please contact Roborock customer service directly. Refer to the product packaging for contact details or visit the official Roborock website.
For support related to your Roborock robotic vacuum or mop, please consult the specific device's user manual or the Roborock support website.
