Important Safety Information
Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or other injuries that could be hazardous or even fatal. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- WARNING: Risk of fire. Use only with specified wattage and voltage.
- Consult a qualified electrician if you have any electrical questions.
- Do not attempt to alter the fixture or its components.
Package Contents
Verify that all parts listed below are included in your package. If any parts are missing or damaged, contact customer service for assistance.
- 3-Light Integrated LED Track Light Fixture
- Mounting Hardware Kit
- Instruction Sheet
Image: The complete GLOBE Electric 59941 Bleecker 3-Light Integrated LED Track Lighting fixture, showcasing its matte black finish and three adjustable light heads.
Setup and Installation
This fixture is designed for easy installation on flat or sloped ceiling surfaces. Ensure power is disconnected before beginning installation.
- Prepare the Mounting Surface: Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
- Attach Mounting Bracket: Secure the mounting bracket to the electrical box using the provided screws.
- Make Electrical Connections: Connect the fixture's wires to the household electrical wires according to local codes. Typically, black to black (live), white to white (neutral), and bare copper or green to green or bare copper (ground). Use wire nuts to secure connections.
- Mount the Fixture: Carefully align the fixture base with the mounting bracket and secure it with the provided screws.
- Adjust Light Heads: The three integrated LED heads are adjustable. Pivot each head to direct light as desired.
Image: The GLOBE Electric 59941 Bleecker track light installed on a white ceiling, demonstrating its sleek profile and how the three lights illuminate the space.
Image: A diagram showing the product dimensions: 19.25 inches (49 cm) in length, 4.75 inches (12 cm) in depth, and 1.375 inches (3.5 cm) in height.
Operating Instructions
The GLOBE Electric 59941 Bleecker track light features integrated LEDs and adjustable heads for versatile illumination.
- Power On/Off: Operate the light using a standard wall light switch.
- Dimming Functionality: This fixture is fully dimmable. For optimal performance, use with a compatible LED dimmer switch.
- Adjusting Light Direction: Each of the three light heads can be manually pivoted to direct the warm white (3000K) light exactly where needed.
Image: A close-up view of the track light showing one of the directional heads with an arrow indicating its pivoting capability, allowing users to adjust the light direction.
Image: The track light installed in a modern kitchen, providing targeted illumination over a countertop and island, highlighting its functional and aesthetic integration.
Maintenance
This LED track light is designed for long-lasting performance with minimal maintenance.
- Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- No Bulb Replacement: The fixture features integrated LEDs with a lifespan of approximately 30,000 hours, meaning no bulb replacements are necessary.
Image: A visual representation of the track light emphasizing that no traditional bulbs are required due to its integrated LED design, highlighting its long-lasting performance.
Troubleshooting
If you experience issues with your track light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure wall switch is in the ON position. Verify electrical connections. |
| Light flickers or dims unexpectedly. | Loose wiring connection or incompatible dimmer switch. | Ensure all wire connections are secure. If using a dimmer, verify it is compatible with LED fixtures. |
| Buzzing sound when dimmed. | Incompatible dimmer switch. | Replace with a high-quality LED-compatible dimmer switch. Some dimmers may cause buzzing at certain levels. |
If the problem persists after attempting these solutions, contact a qualified electrician or GLOBE Electric customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | GLOBE Electric |
| Model Name | Bleecker |
| Part Number | 59941 |
| Color | Matte Black |
| Material | Metal |
| Product Dimensions | 4.75"L x 19.25"W x 2"H |
| Light Source Type | Integrated LED |
| Number of Light Sources | 3 |
| Wattage | 21 Watts |
| Brightness | 1200 Lumens |
| Color Temperature | 3000 Kelvin (Warm White) |
| CRI | 90 |
| Bulb Life | 30,000 Hours |
| Dimmable | Yes |
| Voltage | 120 Volts |
| Installation Type | Track Mount |
| Indoor/Outdoor Usage | Indoor |
Warranty Information
This product is sold without an explicit warranty. For any concerns regarding product defects or performance, please refer to the retailer's return policy or contact GLOBE Electric customer support directly.
Support
For further assistance, technical support, or to report any issues, please contact GLOBE Electric customer service. You can typically find contact information on the product packaging or on the official GLOBE Electric website.
Online Resources:
- Visit the official GLOBE Electric Store on Amazon for product information and updates.
