Introduction
Thank you for choosing the FEELSO Filtered Handheld Shower Head. This manual provides essential information for the proper installation, operation, maintenance, and troubleshooting of your new shower system. Please read these instructions carefully before installation and retain them for future reference.
Included Components
Verify that all components are present before beginning installation:
- Handheld Shower Head (with integrated 15-stage filter cartridge)
- 60-inch Stainless Steel Hose
- Angle-adjustable Bracket
- Spare Washer
- Additional Teflon Tape
Image: Overview of the FEELSO Filtered Handheld Shower Head components.
Setup and Installation
No plumber is needed for installation. Follow these steps to install your new shower head:
- Prepare the Shower Arm: Unscrew and remove your existing shower head from the shower arm. Clean any residue from the shower arm threads.
- Apply Teflon Tape: Wrap the provided Teflon tape clockwise around the threads of your shower arm 3-5 times to ensure a watertight seal.
- Install the Bracket: Screw the angle-adjustable bracket onto the shower arm. Hand-tighten only. Do not overtighten.
- Connect the Hose: Attach one end of the 60-inch stainless steel hose to the outlet of the bracket. Ensure a washer is inside the hose connector. Hand-tighten.
- Attach Shower Head: Attach the other end of the hose to the handheld shower head. Ensure a washer is inside this hose connector. Hand-tighten.
- Test for Leaks: Turn on the water supply and check for any leaks. If leaks occur, tighten connections slightly or reapply Teflon tape.
Image: Detailed view of the swivel ball joint and hose connection for installation.
Image: The 60-inch stainless steel hose, designed for durability and leak prevention.
Operating Instructions
Spray Modes
Your FEELSO shower head features three distinct spray modes to customize your shower experience:
- Rainfall Mode: Provides a gentle, full-coverage spray, mimicking natural rainfall.
- Massage Mode: Delivers a focused, invigorating stream, ideal for relieving muscle tension.
- Mix Mode: Combines elements of both rainfall and massage for a balanced spray.
Switching Modes
To change between spray modes, simply press the button located on the shower head. Each press will cycle through the available modes.
Image: Visual representation of the three spray modes and the mode selection button.
Image: Close-up of the one-click switch button for easy mode selection.
High Pressure Performance
The shower head is designed to deliver a dense and powerful water flow, ensuring a satisfying shower experience even in areas with lower water pressure.
Image: Comparison of water pressure, highlighting the FEELSO shower head's strong flow.
Maintenance
Filter Cartridge Replacement
The integrated 15-stage filter cartridge should be replaced every 4-6 months, depending on your local water conditions and usage, to maintain optimal filtration performance.
- Unscrew the Handle: Gently twist the handle of the shower head counter-clockwise to separate it from the shower head body.
- Remove Old Filter: Carefully pull out the used filter cartridge from the handle.
- Insert New Filter: Insert a new FEELSO 15-stage filter cartridge into the handle, ensuring it is seated correctly.
- Reassemble: Screw the handle back onto the shower head body clockwise until secure. Do not overtighten.
Image: Step-by-step guide for replacing the internal filter cartridge.
Image: Visual guide for replacing the filter, showing the shower head components.
Cleaning the Nozzles
The shower head features anti-clogging silicone nozzles. To clean them, simply rub your finger across the nozzles to dislodge any mineral buildup. For more stubborn deposits, a soft brush and a mild descaling solution can be used.
Image: Close-up of the anti-clogging silicone nozzles for easy cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Pressure | Clogged nozzles; Filter cartridge needs replacement; Low household water pressure. | Clean the silicone nozzles. Replace the filter cartridge. Consult a plumber if household water pressure is consistently low. |
| Leaks at Connections | Loose connections; Insufficient Teflon tape; Worn washers. | Ensure all connections are hand-tight. Reapply Teflon tape. Check and replace washers if damaged. |
| Water Quality Not Improving | Filter cartridge is expired or heavily used. | Replace the filter cartridge. Ensure you are using genuine FEELSO replacement filters. |
| Difficulty Changing Spray Modes | Button mechanism is stiff or obstructed. | Ensure the button is clean and free of mineral buildup. Press firmly. |
Specifications
- Model: 72020
- Material: Stainless Steel, Top Quality ABS
- Finish Type: Brushed Chrome
- Installation Type: Wall Mounted
- Flow Rate: 1.8 GPM (Gallons Per Minute)
- Product Dimensions: 12"L x 4.7"W
- Number of Settings: 3 (Rainfall, Massage, Mix)
- Hose Length: 60 Inches
- Filter Stages: 15
- Item Weight: 15.9 ounces
Image: Diagram illustrating the 15-stage filtration system.
Image: Explanation of the filtration benefits, including removal of chlorine, heavy metals, and sediment.
Warranty and Support
FEELSO products come with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures hassle-free return or replacement.
For any questions, concerns, or support needs, please contact our customer service team. We are committed to providing the best customer service within 24 hours.
Email: sales05@feelsolife.com
Image: FEELSO customer support team ready to assist.
