1. Introduction
Thank you for choosing the Baseus Magnetic Power Bank. This portable charger is designed to provide convenient and efficient power to your devices, featuring both wireless MagSafe-compatible charging and wired USB-C/USB-A outputs. Please read this manual thoroughly before use to ensure proper operation and safety.
2. Product Overview
2.1. Key Features
- Capacity: 10,000mAh
- Wireless Charging: MagSafe-compatible (up to 10W, 7.5W for iPhone 12/13 series, 5W for AirPods)
- Wired Charging:
- USB-C Output/Input: Power Delivery (PD) 20W output, 18W QC/PD input
- USB-A Output: 18W FCP/QC output
- Digital Display: Shows remaining battery percentage.
- Safety Features: Over-charge, over-voltage, over-current, short-circuit protection.
2.2. Package Contents
- Baseus Magnetic Power Bank (Model PPCXW10)
- USB-A to USB-C Charging Cable
- User Manual
3. Setup
3.1. Initial Charging of the Power Bank
Before first use, fully charge the power bank. Connect the provided USB-A to USB-C cable to the power bank's USB-C port and a compatible USB power adapter (not included). The digital display will show the charging progress, reaching 100% when fully charged. A full charge typically takes approximately 3 hours with an 18W power adapter.
Image: The power bank's digital display showing 99% charge while being recharged via its USB-C port.
3.2. Power Button Function
Press the power button located on the side of the power bank to activate the digital display and initiate charging. The display will show the current battery percentage.
4. Operating Instructions
4.1. Wireless Charging (MagSafe Compatible)
- Ensure your device is compatible with MagSafe wireless charging (e.g., iPhone 12/13 series). For optimal magnetic attachment and charging, use a MagSafe-compatible case.
- Align your device with the magnetic charging area on the power bank. The magnets will snap into place, and your device should begin charging. The power bank's display will show a charging indicator.
Image: An iPhone wirelessly charging by being magnetically attached to the power bank.
Image: Illustration demonstrating how the power bank charges through MagSafe-compatible cases, indicating non-MagSafe cases are not supported for magnetic attachment.
Video: Demonstrates the magnetic alignment and wireless charging function of the Baseus power bank, including wired charging capabilities.
4.2. Wired Charging
Connect your device to the power bank using a compatible charging cable (USB-C to USB-C, or USB-A to your device's port). The power bank supports fast charging protocols like Power Delivery (PD) and Quick Charge (QC) for efficient power delivery.
Image: Detailed view of the power bank's wired charging ports and their specifications.
4.3. Simultaneous Charging
The power bank can charge multiple devices simultaneously using a combination of wireless and wired connections. Note that charging the power bank itself while simultaneously charging other devices may not be supported or may reduce charging speed.
Image: The power bank simultaneously charging three devices: one wirelessly and two via wired connections.
5. Compatibility
This power bank is designed for broad compatibility:
- Wireless Charging: Compatible with iPhone 12 series, iPhone 13 series (excluding iPhone 13 Pro), AirPods Pro, Baseus W11 Earbuds, and other Qi-enabled devices. A MagSafe-compatible case is required for magnetic attachment.
- Wired Charging: Compatible with most USB-C and USB-A powered devices, including smartphones (iPhone, Samsung, Xiaomi, etc.), tablets, and other small electronics.
Image: Visual guide to the wireless charging compatibility of the power bank with various devices and the necessity of a MagSafe case.
6. Maintenance
- Keep the power bank dry and away from moisture.
- Avoid extreme temperatures (hot or cold).
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store in a cool, dry place when not in use.
7. Troubleshooting
- Device not charging: Ensure the power bank is sufficiently charged. Press the power button to activate it. Check cable connections for wired charging. For wireless charging, ensure proper alignment and device compatibility (including MagSafe case if applicable).
- Slow charging: Verify that your cables and power adapter (for recharging the power bank) support fast charging protocols. Ensure your device is placed correctly on the wireless charging pad.
- Weak magnetic attachment: Ensure your device or case is genuinely MagSafe-compatible. Non-MagSafe cases may interfere with magnetic strength.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | PPCXW10 |
| Battery Capacity | 10,000mAh |
| Battery Cell Composition | Lithium Polymer |
| USB-C Output/Input | PD 20W Output / 18W QC/PD Input |
| USB-A Output | 18W FCP/QC Output |
| Wireless Output | Up to 10W (7.5W for iPhone 12/13 series) |
| Product Dimensions | 5.76 x 2.8 x 0.66 inches |
| Item Weight | 10.8 ounces |
9. Safety Information
- Do not disassemble, modify, or repair the device.
- Avoid dropping, hitting, or subjecting the device to strong impacts.
- Keep away from fire, water, and corrosive liquids.
- Do not expose to direct sunlight or high temperatures for extended periods.
- Dispose of the product responsibly according to local regulations.
10. Warranty and Support
For warranty information and customer support, please refer to the official Baseus website or contact your local distributor. Keep your purchase receipt for warranty claims.
