1. Product Overview
The YITAMOTOR Front and Rear Bumper system is engineered for 2007-2018 Jeep Wrangler JK and JKU Unlimited models, offering enhanced protection and off-road functionality. Constructed from durable steel, these bumpers feature integrated LED lights, D-ring shackle mounts, and a winch plate for the front bumper. The design also includes paintable trim for customization.
- Precise Compatibility: Designed for 2007-2018 Jeep Wrangler JK/JKU Unlimited (2/4 Doors) models.
- Flexible Customization: Features paintable trim to match your vehicle's aesthetic.
- Enhanced Off-road Performance: Includes 4 x 12W upgraded LED lights for improved visibility and D-ring shackle mounts for recovery.
- Heavy Duty Protection: Manufactured from 5/32" steel sheet and 2" x 0.120'' wall steel tubing with a textured black powder coating for rust resistance.
- Integrated Winch Plate: Front bumper includes a winch plate for recovery operations.
2. Safety Information
Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury or damage to your vehicle.
- Wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
- Ensure the vehicle is securely supported on a level surface using jack stands before beginning any work.
- Disconnect the vehicle's battery before working on electrical components, such as LED lights.
- Do not overtighten bolts; refer to vehicle manufacturer specifications for torque values where applicable.
- If you are unsure about any step of the installation process, seek professional assistance.
3. Package Contents
Verify that all components are present and undamaged before beginning installation. The package will be divided into two separate packages for distribution.
3.1 Front Bumper Components
- Front Bumper Assembly with integrated winch plate
- LED Lights (pre-installed or separate)
- D-ring Shackles with Isolators
- Bull Bar
- License Plate Bracket
- Detachable Decorative Plates (red)
- Mounting Hardware (bolts, washers, nuts)
3.2 Rear Bumper Components
- Rear Bumper Assembly with integrated hitch receiver
- LED Lights (pre-installed or separate)
- D-ring Shackles with Isolators
- Detachable Decorative Plates (red)
- Mounting Hardware (bolts, washers, nuts)
4. Installation Guide
Professional installation is recommended. If performing self-installation, ensure you have the necessary tools and follow all safety precautions.
4.1 General Installation Notes
- Always refer to your vehicle's owner's manual for specific instructions on removing factory bumpers.
- Ensure all mounting surfaces are clean and free of debris.
- Hand-tighten all bolts initially to allow for adjustments before final tightening.
- For electrical connections (LED lights), ensure proper wiring and insulation to prevent shorts.
4.2 Front Bumper Installation
- Remove the factory front bumper according to your Jeep Wrangler's service manual.
- Position the YITAMOTOR front bumper onto the vehicle's frame mounts.
- Align the pre-drilled mounting holes on the bumper with the frame.
- Secure the bumper using the provided mounting hardware. Ensure all bolts are properly seated and tightened to manufacturer specifications.
- Install the D-ring shackles and any other accessories like the license plate bracket.
- Connect the wiring for the LED lights to the vehicle's electrical system.
- Verify the bumper is securely mounted and does not wobble. If instability is observed, re-check all mounting points and consider additional bracing if necessary, especially for winch use.
4.3 Rear Bumper Installation
- Remove the factory rear bumper and any associated components (e.g., hitch receiver) from your Jeep Wrangler.
- Attach the separate hitch receiver component to the vehicle's frame using the provided hardware.
- Position the YITAMOTOR rear bumper onto the vehicle's frame mounts, aligning with the hitch receiver.
- Secure the bumper using the provided mounting hardware. Ensure all bolts are properly seated and tightened.
- Install the D-ring shackles.
- Connect the wiring for the LED lights to the vehicle's electrical system.
- Confirm all connections are secure and the bumper is stable.
5. Operating Instructions
5.1 LED Lights
The integrated 12W LED lights are designed to provide additional illumination for off-road driving or improved visibility. They are typically wired to a switch in the vehicle's cabin or integrated with existing lighting circuits. Consult your installer or vehicle's wiring diagram for specific operation.
5.2 Winch Operation (Front Bumper)
The front bumper includes a dedicated winch plate. When installing a winch, ensure it is securely mounted to the plate according to the winch manufacturer's instructions. Always follow safe winching procedures, including using appropriate recovery gear, wearing gloves, and maintaining a safe distance during operation. Never exceed the winch's rated capacity or the bumper's structural limits.
5.3 D-Ring Usage
The D-ring shackle mounts are designed for vehicle recovery. Use only high-quality D-ring shackles with appropriate load ratings. Always ensure shackles are fully tightened before use. Never attach recovery straps or chains directly to the bumper itself, only to the designated D-ring mounts.
6. Maintenance
6.1 Cleaning
Regularly clean the bumper with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the powder coating.
6.2 Inspection
Periodically inspect all mounting bolts for tightness, especially after off-road use. Check the bumper for any signs of damage, rust, or wear. Inspect LED lights for proper function and wiring for any fraying or loose connections.
6.3 Paintable Trim
The detachable decorative trim pieces are designed to be paintable. If you choose to customize their color, ensure proper surface preparation (cleaning, sanding) and use automotive-grade paint for durability. Allow adequate drying time before re-installation.
7. Troubleshooting
- Bumper Wobbles After Installation: Re-check all mounting bolts for proper tightness. Ensure the bumper is correctly seated on the frame. For the front bumper, some users have reported a need for additional bracing for maximum stability, especially when a winch is installed or heavy recovery is anticipated. Consult a professional if the issue persists.
- LED Lights Not Functioning: Check all electrical connections for proper wiring and secure contact. Verify the fuse in the vehicle's circuit. Ensure the switch (if installed) is working correctly.
- Rust or Corrosion: While the bumper features a powder coating for rust resistance, prolonged exposure to harsh elements or physical damage can lead to corrosion. Address any chips or scratches in the coating promptly with touch-up paint to prevent rust spread.
8. Product Specifications
| Feature | Specification |
|---|---|
| Brand | YITAMOTOR |
| Model Number | YTCE005960 |
| Material | 5/32" Steel Sheet, 2" x 0.120'' Wall Steel Tubing |
| Finish | Textured Black Powder Coating |
| Color | Red & Black |
| Item Weight | Approximately 66.1 pounds (for the combined unit, individual weights may vary) |
| Product Dimensions | 15.35"D x 72.84"W x 12.6"H (Overall) |
| Vehicle Service Type | Jeep Wrangler 2007-2018 JK & JKU Unlimited |
| Special Features | LED Lights, D-Ring Mounts, Winch Plate (Front), Hitch Receiver (Rear), Paintable Trim |
9. Warranty and Support
YITAMOTOR offers a worry-free service for its products. We accept returns and exchanges on any defective products or those damaged during transport. For specific warranty details, claims, or technical support, please contact YITAMOTOR customer service directly.
If you have questions regarding installation or product compatibility before purchasing, please reach out to us. The manufacturer's official store can be found at: YITAMOTOR Store on Amazon.
