Nerf Rival Vision XXII-800 Blaster Instruction Manual

1. Introduction

The Nerf Rival Vision XXII-800 Blaster is designed for advanced precision battling. It features an adjustable rear sight, an optimized barrel, and utilizes Nerf Rival Accu-Rounds for enhanced accuracy and consistent flight. This blaster includes an 8-round integrated magazine and a pull-back priming bar, firing rounds at a velocity of 90 feet per second.

What's in the Box:

• Nerf Rival Vision XXII-800 Blaster
• 8 Nerf Rival Accu-Rounds
• Instruction Manual

Figure 1: Nerf Rival Vision XXII-800 Blaster and included Accu-Rounds.

2. Important Safety Information

WARNING: Small parts may be generated. Not for children under 3 years.

• Always use official Nerf Rival Accu-Rounds. Other rounds may not be safe.
• Do not modify the blaster or rounds.
• Eyewear is recommended for players and people within range (not included).
• Do not aim at eyes or face.

3. Blaster Components

Familiarize yourself with the key components of your Nerf Rival Vision XXII-800 Blaster:

• Integrated Magazine: Located along the bottom of the blaster, holds up to 8 Accu-Rounds.
• Pull-Back Priming Bar: Used to prime the blaster before firing.
• Trigger: Activates firing mechanism.
• Trigger Lock: A safety mechanism to prevent accidental firing.
• Adjustable Rear Sight: Allows for customization to improve aim.
• Edge-Glow Front Sight: Provides a clear aiming point when aligned with the rear sight.
• Jam Clearing Mechanism: A dedicated button/lever to clear any jammed rounds.

Figure 2: Side view of the Nerf Rival Vision XXII-800 Blaster.

Figure 3: Detail of the adjustable rear sight.

4. Setup

Loading Accu-Rounds:

1. Locate the integrated magazine opening on the side of the blaster.
2. Push the orange tab down to open the magazine.
3. Insert up to 8 Nerf Rival Accu-Rounds into the magazine, ensuring they are stacked correctly.
4. Release the orange tab to secure the rounds in place.

Figure 4: Loading Accu-Rounds into the integrated magazine.

Video: Product Overview and Loading

Video 1: A brief overview of the Nerf Rival Vision XXII-800 Blaster, including how to load the rounds.

5. Operating the Blaster

Priming and Firing:

1. Ensure the blaster is loaded with Accu-Rounds.
2. Disengage the trigger lock by sliding it to the unlocked position (typically indicated by a green color).
3. Pull the priming bar all the way back until it clicks, then push it all the way forward. This action chambers a round.
4. Aim the blaster using the adjustable sights.
5. Pull the trigger to fire a round.
6. To fire another round, repeat steps 3-5.

Figure 5: Priming the blaster using the pull-back bar.

Adjusting the Sight:

The rear sight can be adjusted to customize your aim. Slide the rear sight backward and forward, and from side to side, to align it with the edge-glow front sight for optimal precision.

Video: Product Overview and Operation

Video 2: A detailed product overview demonstrating the blaster's features and operation.

6. Maintenance

General Care:

• Keep the blaster clean and free from dirt or debris. Wipe with a dry cloth as needed.
• Store the blaster and rounds in a cool, dry place away from direct sunlight.
• Avoid exposing the blaster to extreme temperatures or moisture.

7. Troubleshooting

Clearing Jams:

If a round becomes jammed, do not force the priming bar or trigger. Locate the jam clearing mechanism (if present, typically a small lever or button) and follow the instructions to safely remove the jammed round. Always ensure the trigger lock is engaged before attempting to clear a jam.

8. Specifications

9. Warranty and Support

For warranty information or product support, please refer to the contact details provided on the product packaging or visit the official Nerf website. Keep your purchase receipt as proof of purchase.