1. Introduction and Overview
The Pyle PLUTV40BTA is a 2-way waterproof Bluetooth off-road speaker system designed for high-quality audio reproduction in challenging outdoor environments. This amplified active and passive speaker system is ideal for use with ATVs, UTVs, 4x4s, Jeeps, and marine watercraft. It features Bluetooth wireless music streaming, an AUX input, and a durable marine-grade waterproof construction, ensuring reliable performance and impressive sound.
Figure 1.1: Pyle PLUTV40BTA Off-Road Speakers
This image displays the two Pyle PLUTV40BTA off-road speakers, showcasing their sleek black design and the prominent Pyle branding. These speakers are engineered for robust outdoor use.
2. Package Contents
Please verify that all items listed below are included in your package:
- (1) Active Off-Road Speaker
- (1) Passive Off-Road Speaker
- (1) 2.5M Speaker Wire (for connecting active and passive speakers)
- (1) 3.5mm Stereo Cable
- (6) Rubber Pads (4.53'' x 1.18'' x 0.12'' -inches)
3. Setup and Installation
3.1 Mounting the Speakers
The PLUTV40BTA speakers feature universal mounting brackets designed for roll-bars or roll-cages with diameters between 1.5 inches and 2.0 inches. Use the included rubber pads to ensure a secure fit and prevent vibration.
Figure 3.1: Speakers Mounted on a Boat's Roll-Bar
This image illustrates the Pyle PLUTV40BTA speakers securely mounted on a boat's roll-bar, demonstrating the universal mounting bracket design suitable for various vehicle types.
3.2 Wiring Connections
The system includes an integrated power and wiring harness. Connect the active speaker to a DC 12V power supply. Use the provided 2.5-meter speaker wire to connect the active speaker to the passive speaker. Ensure all connections are secure and properly insulated to prevent short circuits, especially in marine or off-road environments.
Figure 3.2: Speaker Rear Connections
This image provides a view of the rear connections on the Pyle PLUTV40BTA speakers, illustrating where the wiring harness and speaker wire connect for power and audio signal transmission.
4. Operating Instructions
4.1 Powering On/Off
The system features an anti-thump turn-on and soft turn-on/off circuit to protect the speakers and ensure smooth operation. Once connected to a 12V DC power source, the speakers will power on automatically.
4.2 Bluetooth Connectivity
- Ensure the speakers are powered on.
- On your Bluetooth-enabled device (smartphone, tablet, laptop), navigate to the Bluetooth settings.
- Search for available devices and select 'PyleUSA' from the list.
- Once paired, you can stream audio wirelessly from your device to the speakers. The wireless range is approximately 30+ feet.
Figure 4.1: Bluetooth Connectivity in Use
This image shows individuals enjoying music with the Pyle PLUTV40BTA speakers, with a smartphone in hand demonstrating the ease of Bluetooth wireless audio streaming.
4.3 AUX (3.5mm) Input
For devices without Bluetooth, or for a wired connection, use the provided 3.5mm stereo cable to connect your audio source to the AUX input jack on the speaker. This allows for direct audio playback from external devices.
5. Maintenance
The Pyle PLUTV40BTA speakers are designed with marine-grade IP-X5 waterproof construction and weatherproof housing, making them highly resistant to water and outdoor elements. To ensure longevity and optimal performance:
- Regularly clean the speaker surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Inspect wiring connections periodically for any signs of wear or corrosion, especially after exposure to harsh conditions.
- Ensure mounting brackets remain secure.
Figure 5.1: Waterproof Design
This image highlights the waterproof and water-resistant features of the Pyle PLUTV40BTA speaker, showing water splashing on its surface, ideal for marine and off-road use.
6. Troubleshooting
If you encounter issues with your Pyle PLUTV40BTA speakers, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound | No power; incorrect wiring; audio source issue. | Check 12V DC power connection. Verify speaker wire connection between active and passive speakers. Ensure audio source is playing and volume is up. |
| Bluetooth Disconnection or Pairing Failure | Device out of range; interference; incorrect pairing procedure. | Move device closer to speakers (within 30+ ft). Turn off and on Bluetooth on your device. Forget 'PyleUSA' from your device's Bluetooth list and re-pair. |
| Distorted Sound | Volume too high; poor audio source quality; damaged speaker. | Reduce volume on both the speaker and the audio source. Test with a different audio source. If distortion persists, contact customer support. |
7. Technical Specifications
| Feature | Specification |
|---|---|
| Speaker Power | 900 Watt MAX |
| Amplifier Power | 2 x 450 Watt MAX @ 4 Ohms (2 x 225 Watt RMS) |
| Power Supply | DC 12V |
| Amplifier Type | 2-Channel, Class D |
| Sound System | (2) x 4.0'' Woofers + (2) x 1'' Tweeters |
| Waterproof Rating | IP-X5 Marine Grade |
| Speaker Type | Polypropylene Cone, Butyl Rubber Surround (x2) |
| Tweeter Type | Neodymium Dome (x2) |
| Frequency Response | 105Hz-20kHz |
| Impedance | 4 Ohm |
| Magnet Type | 30 oz. Circuit |
| Mid-Woofer Voice Coil | 1.0'', KSV |
| Sensitivity | 90 dB +/- 2 dB @ 1M/1W |
| T.H.D | <0.05% |
| S/N Ratio | >70dB |
| Channel Separation | >65dB |
| Amplifier Freq. Response | 20Hz- 30kHz |
| Fuse | 1 x 15A |
| Mounting Bracket Diameter | 1.5” ~ 2.0” -inches |
| Speaker Dimensions (L x W x H) | 5.5” x 8.0” x 7.4” -inches (with Bracket, Each) |
| Bluetooth Version | V5.0 |
| Bluetooth Network Name | 'PyleUSA' |
| Wireless Range | 30+ ft. |
8. Warranty and Support
For warranty information and customer support, please refer to the official Pyle website or contact your retailer. A Certificate of Compliance document is available for download here.
For additional assistance or inquiries, please visit the Pyle Store on Amazon.
