KTUEOV Key Safe Wall Mounted Instruction Manual

1. Product Overview

The KTUEOV Wall Mounted Key Safe is designed to provide secure storage for keys, cards, and other small valuables. It features a robust 12-digit resettable combination lock, offering enhanced security compared to standard 4-dial models. Its durable construction and weatherproof cover make it suitable for both indoor and outdoor use.

• Up to 12-Digit Combination: Offers tens of thousands of different combinations for high security.
• More Storage Space: Internal dimensions of 3.94 x 3.15 x 1.18 inches, suitable for keychains, bank cards, car keys, and cash.
• Top Security: Constructed from heavy-duty PVC, aluminum alloy, and durable steel locking mechanism to resist tampering.
• Weatherproof Cover: Protects the key box from environmental elements like wind, rain, snow, and dust.
• Wide Application: Ideal for home, garage, office, or for sharing keys with family, friends, or service providers.

Image 1.1: KTUEOV Key Safe and included accessories.

2. Setup and Installation

2.1 Setting the Combination Code

The key safe uses a 12-digit combination. Follow these steps to set your desired code. Remember to record your code in a safe place.

1. Step 1: Open the Key Box. Rotate the switch on the inside of the key box to the open position.


Image 2.1: Opening the key box.

2. Step 2: Prepare for Code Setting. Rotate the switch again to the code setting position.


Image 2.2: Preparing to set the code.

3. Step 3: Set Your Code. Use the provided screwdriver to rotate the desired number buttons 180 degrees on the back of the keypad. Only the selected numbers will be part of your combination. The 'C' button acts as a cancel button and is not part of the code.


Image 2.3: Setting individual code digits.

4. Step 4: Record Your Code. It is crucial to write down your new password or take a photo of it. If the code is forgotten, the box cannot be opened without dismantling.


Image 2.4: Recording the new code.

5. Step 5: Enter New Code. After setting the passwords, enter the new combination on the keypad.


Image 2.5: Entering the new combination.

6. Step 6: Verify. If you can open the key safe with the new password, the code has been successfully set.


Image 2.6: Verifying the new code.

Note: You can set non-repeating 4-12 digit passwords. The 'C' button is for canceling an incorrect entry and allows you to re-enter the code if mistyped. The internal hook must be open to turn the number code behind it.

2.2 Mounting the Key Safe

The key safe is designed for wall mounting. The package includes 4 screws and 4 expansion plugs for installation.

1. Step 1: Mark Screw Locations. Hold the key safe against the desired mounting surface and mark the four screw holes.
2. Step 2: Drill Holes. Use an appropriate drill bit to drill holes at the marked locations.
3. Step 3: Insert Expansion Plugs. Gently tap the expansion plugs into the drilled holes until they are flush with the surface.
4. Step 4: Install the Box. Align the key safe with the holes and secure it firmly with the provided screws.

Image 2.7: Detailed installation steps and package contents.

3. Operation

To open the key safe, enter your set combination by pressing the corresponding number buttons. Once the correct combination is entered, turn the knob to unlock and open the front cover. To close and lock the safe, simply close the cover and turn the knob back to the locked position. The combination does not need to be re-entered to lock the safe.

Image 3.1: Examples of key safe applications.

Image 3.2: What can be stored in the key box and unsafe alternatives.

4. Maintenance

The KTUEOV Key Safe is designed with a weatherproof cover to protect it from environmental elements. To ensure its longevity and proper function:

• Regularly inspect the weatherproof cover for any damage or cracks.
• Clean the exterior periodically with a damp cloth to remove dirt and debris. Avoid abrasive cleaners.
• Ensure the combination buttons and the turning knob operate smoothly. If they become stiff, a small amount of silicone-based lubricant can be applied, avoiding direct contact with the internal coding mechanism.

Image 4.1: Weatherproof design of the key safe.

5. Troubleshooting

5.1 Code Not Working / Cannot Open

• Verify the Code: Double-check that you are entering the correct 12-digit combination. Ensure no digits are missed or incorrectly pressed.
• Press 'C' to Clear: If you suspect a mistype, press the 'C' (cancel) button to clear the current entry and re-enter the code.
• Button Engagement: Ensure each button is fully pressed and clicks into place. Some users report buttons can be stiff; ensure firm and deliberate presses.
• Internal Mechanism: Ensure the internal hook is in the correct position for the code to engage.
• Forgotten Code: If the code is forgotten and not recorded, the key safe cannot be opened without professional assistance or dismantling.

5.2 Stiff Buttons or Knob

• Lubrication: Apply a small amount of silicone-based lubricant to the moving parts of the buttons and knob if they feel stiff. Avoid oil-based lubricants that can attract dirt.
• Debris: Check for any debris or dirt that might be obstructing the buttons or knob. Clean thoroughly if necessary.

6. Specifications

7. Warranty and Support

For specific warranty information regarding your KTUEOV Key Safe, please refer to the documentation included with your purchase or contact KTUEOV customer support directly. Keep your purchase receipt as proof of purchase.

If you encounter any issues or have questions not covered in this manual, please contact KTUEOV customer service through their official channels or the retailer from whom you purchased the product.