1. Product Overview
This EverNice power cord is designed to connect your Kenmore sewing machine and its 3-prong foot control pedal to a power outlet. It ensures proper power delivery for the operation of your sewing machine.
Identifying Cord Ends
The power cord features three distinct ends, labeled A, B, and C for easy identification:
- End A: Connects to the 3-prong socket of the sewing machine.
- End B: Connects to the foot pedal.
- End C: The standard US power plug, connects to a wall power socket.
The length from End A to End B is approximately 140 cm (55 inches). The length from End A to End C is approximately 185 cm (72.8 inches).
2. Setup Instructions
Follow these steps to correctly connect your EverNice power cord to your sewing machine and foot pedal.
Important Compatibility Check
Sewing machine models can vary in their foot control and power cord socket designs over time. Before connecting, it is crucial to compare the shape and size of the cord's connectors with the sockets on your machine and foot pedal. Ensure a precise match to prevent damage or improper function.
Connection Steps
- Connect to Sewing Machine: Carefully insert End A (the 3-prong connector) into the corresponding 3-prong socket on your Kenmore sewing machine. Ensure it is firmly seated.
- Connect to Foot Pedal: Insert End B into the designated input on your sewing machine's foot control pedal.
- Connect to Power Outlet: Plug End C (the US power plug) into a standard wall power socket.
- Verify Connections: Double-check all connections to ensure they are secure before attempting to power on your sewing machine.
3. Operating Instructions
Once the power cord is correctly connected, your sewing machine is ready for operation. The power cord facilitates the electrical connection between the wall outlet, the foot pedal, and the sewing machine, allowing you to control the machine's speed and function via the foot pedal.
- Ensure your sewing machine's power switch is in the 'Off' position before plugging into the wall outlet.
- After all connections are made, turn on your sewing machine's power switch.
- Use the foot pedal as instructed by your sewing machine's specific user manual to control stitching speed.
4. Maintenance and Care
Proper care of your power cord will extend its lifespan and ensure safe operation.
- Storage: When not in use, coil the cord loosely. Avoid tight coiling or kinking, which can damage the internal wires.
- Handling: Always grasp the plug firmly when inserting or removing it from an outlet or machine socket. Do not pull on the cord itself.
- Inspection: Periodically inspect the cord for any signs of damage, such as cuts, fraying, or exposed wires. If damage is found, discontinue use immediately and replace the cord.
- Environment: Use the cord indoors only. Keep it away from water, excessive heat, and sharp objects.
5. Troubleshooting
If you encounter issues, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Sewing machine does not power on. | Loose connection or incompatible cord. | Ensure all three ends (A, B, C) are securely connected. Verify the cord's connectors match your machine's sockets. Check if the wall outlet is functional. |
| Foot pedal is unresponsive. | Loose connection to foot pedal. | Check that End B is fully inserted into the foot pedal. Ensure the foot pedal itself is functional. |
| Visible damage to the cord. | Physical wear and tear. | Discontinue use immediately. Replace the power cord with a new, compatible one. |
6. Product Specifications
- Brand: EverNice
- Model Number: EPC-032270116
- UPC/GTIN: 718245106578
- Connector Gender: Male-to-Female
- Plug Format: Type A (US Standard)
- UL Listed: Yes
- Item Length: Approximately 72.83 inches (185 cm) from End A to End C
- Power Cord Prong Count: 3
- Number of Outlets: 1 (for the sewing machine)
- Indoor Outdoor Usage: Indoor only
- Wattage: 300 watts
7. Compatibility
This power cord is compatible with various Kenmore sewing machine models that utilize a 3-prong foot control pedal with a matching socket configuration. It is essential to visually compare the cord's connectors with your machine's sockets before purchase and use.
Known compatible Kenmore models include, but are not limited to:
- 148.13101, 148.15210, 148.15600, 148.15700, 148.19370
- 158.10301, 158-10400, 158.12270, 158.12470, 158.12511, 158.13360, 158.13400, 158.1345280, 158.1355080, 158.13571, 158.14301, 158.1450180, 158.15251, 158.15810, 158.1595281, 158.16410, 158.16600, 158.16900, 158.17600, 158.17800, 158.17812, 158.17850, 158.1789180, 158.1789280, 158.1941, 158.19410, 158.19411, 158.19412, 158.19460, 158.19461, 158.19470, 158.1787180
- 385.12116690, 385.12216790, 385.12490, 385.12714, 385.12714090, 385.1278191, 385.12814490, 385.1764180, 385.18830, 385.18836, 385.18841, 385.1884180, 385.16622, 385.16655100, 385.16655180, 385.11607090, 385.1168280, 385.1764180, 385.17526590, 385.1764180, 385.17724490, 385.1788180, 385.1782849, 385.17928090, 385.18836090, 385.18830490, 385.18841, 385.17641, 385.81514
8. Warranty and Support
Specific warranty information for this product is not provided in the available documentation. For any questions regarding product compatibility, installation, or troubleshooting beyond this manual, please contact the EverNice customer support team. You can typically find contact information on the product packaging or the retailer's website where the item was purchased. When contacting support, please provide a clear picture of your machine's socket if you are unsure about compatibility.