1. Introduction
The Gravity LTS T 01 is an adjustable laptop stand designed for secure and stable positioning of laptops, DJ controllers, mixers, and other equipment. Its robust aluminum construction and versatile adjustments make it suitable for various applications, from stage performances to studio work.
This manual provides essential information for the safe and effective use of your Gravity LTS T 01 laptop stand. Please read it thoroughly before assembly and operation, and retain it for future reference.
2. Safety Information
- Ensure all components are securely fastened before placing any equipment on the stand.
- Do not exceed the maximum weight capacity of the stand.
- Avoid placing the stand on uneven or unstable surfaces.
- Keep hands clear of moving parts during adjustment to prevent pinching.
- Regularly inspect the stand for any signs of wear or damage. Do not use if damaged.
- This stand is designed for indoor use. Avoid exposure to extreme weather conditions.
3. Package Contents
Verify that all items are present in the package:
- Gravity Laptop Stand with Adjustable Holding Pins (LTS T 01)
- Adjustable Holding Pins (pre-installed or separate)
- Clamps (pre-installed or separate)
4. Setup Instructions
4.1 Unfolding the Tripod Base
Carefully unfold the tripod legs until they are fully extended and stable. Ensure the locking mechanism for the legs is engaged.
Image 1: The Gravity LTS T 01 Laptop Stand with its tripod base fully extended, ready for use.
4.2 Attaching the Mounting Plate
Align the mounting plate with the top pole of the stand. Secure the plate using the provided attachment mechanism. Ensure it is firmly seated and tightened to prevent wobbling.
Image 2: Close-up view of the mounting plate attachment point on the Gravity LTS T 01, highlighting the secure connection.
4.3 Adjusting Holding Pins
The mounting plate features 14 slots in the top section and 2 slots in the bottom section for the adjustable holding pins. Position these pins to securely cradle your laptop (12" to 17") or other equipment. Press the pins onto the device and lock them into place from below using the set screws.
Image 3: The top surface of the Gravity LTS T 01 mounting plate, showing the slots and adjustable holding pins for securing devices.
5. Operating Instructions
5.1 Height Adjustment
The stand's height can be adjusted from 750 mm to 1320 mm. Loosen the height adjustment knob on the main pole, raise or lower the pole to the desired height, and then securely tighten the knob. Ensure the stand remains stable after adjustment.
5.2 Tilting the Mounting Plate
The mounting plate can be tilted continuously by 180 degrees. Loosen the tilt adjustment knob located beneath the plate, set the desired angle (vertical or horizontal), and then firmly tighten the knob to lock the position.
5.3 Securing Your Device
Once the stand is at the desired height and tilt, place your laptop or equipment onto the mounting plate. Adjust the holding pins to firmly grip the device, ensuring it is stable and cannot slide off. Tighten the set screws on the holding pins from below to secure them.
6. Maintenance
- Cleaning: Wipe the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspection: Periodically check all screws, knobs, and joints for tightness. Tighten any loose fasteners.
- Storage: When not in use, fold the stand for compact storage. Store in a dry environment away from extreme temperatures.
7. Troubleshooting
7.1 Stand is Unstable
- Ensure the tripod legs are fully extended and locked.
- Verify that the stand is placed on a flat, level surface.
- Check that all adjustment knobs (height, tilt) are securely tightened.
7.2 Difficulty Adjusting Height or Tilt
- Ensure the corresponding adjustment knob is sufficiently loosened before attempting to move the component.
- Do not force adjustments. If resistance is met, re-check the knob and ensure no obstructions are present.
7.3 Device Not Secure on Plate
- Re-position the adjustable holding pins to firmly grip your device.
- Ensure the set screws for the holding pins are tightened from below the plate.
- Confirm your device size is within the recommended 12" to 17" range.
8. Specifications
| Brand | Gravity |
| Model Name | LTS T 01 |
| Color | BLACK |
| Form Factor | Tripod |
| Compatible Devices | Laptops (12"-17"), DJ Controllers, Mixers |
| Mounting Type | Tabletop (with tripod base) |
| Adjustable Length | Yes (750 mm to 1320 mm) |
| Fastening Type | Cliphalter (Holding Pins) |
| Enclosure Material | Aluminum |
| Tray Tilt | 180 degrees continuous |
| Item Weight | 1.94 kilograms |
9. Warranty and Support
9.1 Warranty Information
This Gravity LTS T 01 laptop stand comes with a 5-year manufacturer's warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
9.2 Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Gravity customer support through their official website or your retailer. Have your model number (LTS T 01) and proof of purchase ready when contacting support.
