PerFascin C-RT7

PerFascin Replacement Remote Control Instruction Manual

For HITACHI TV Models C-RT7, C-RS4, C-RT1, C-RP2, C-RP8, C-RS5, C-RT4, C-RT6, C-RS2, C-RT9, C-H28, C-RT3, C-RT2, C-RS1, C-RS3, C-RS6, C-RP7, C-RP9

1. Overview

Thank you for purchasing the PerFascin Replacement Remote Control. This remote is designed to function as a direct replacement for various original HITACHI TV remote controls, offering full functionality without the need for complex setup or programming. Simply insert batteries, and it's ready for immediate use.

PerFascin replacement remote control in use with a family watching TV

Image 1.1: The PerFascin replacement remote control being used by a family to operate a television. It highlights the ease of use and full functionality.

2. Setup

2.1 Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards to open it.
  3. Insert two (2) AAA alkaline batteries (sold separately) into the compartment. Ensure the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.

No setup or programming is required. The remote control is ready for use immediately after battery installation.

3. Operating Instructions

This replacement remote control provides all the essential functions of your original HITACHI TV remote. While the button layout may differ slightly from your previous remote, all functions are accessible.

3.1 Basic Functions

  • Power Button: Turns the TV on or off.
  • Channel Buttons (CH+/CH-): Changes TV channels.
  • Volume Buttons (VOL+/VOL-): Adjusts the TV volume.
  • Input/Source Button: Switches between different input sources (HDMI, AV, etc.).
  • Menu Button: Accesses the TV's main menu.
  • Navigation Buttons (Up, Down, Left, Right, OK/Enter): Used to navigate menus and confirm selections.
  • Number Buttons (0-9): Directly selects channels.

Note: The 'Analog/Terrestrial' button on this replacement remote will not illuminate.

Comparison of PerFascin remote with original Hitachi remotes C-RT7, C-RT4, C-RP2, C-RP8, C-RS4

Image 3.1: A visual comparison showing the PerFascin replacement remote alongside several original HITACHI remote controls (C-RT7, C-RT4, C-RP2, C-RP8, C-RS4). This illustrates potential differences in button layout while confirming compatibility.

Comparison of PerFascin remote with original Hitachi remotes C-RT1, C-RS5, C-RT6, C-RS2, C-RT9

Image 3.2: Another visual comparison featuring the PerFascin replacement remote and additional original HITACHI remote controls (C-RT1, C-RS5, C-RT6, C-RS2, C-RT9), further demonstrating the design variations.

4. Compatibility

4.1 Compatible Remote Control Models

This remote control is compatible with the following HITACHI remote control models:

  • C-RT7
  • C-RS4
  • C-RT1
  • C-RP2
  • C-RP8
  • C-RS5
  • C-RT4
  • C-RT6
  • C-RS2
  • C-RT9
  • C-H28
  • C-RT3
  • C-RT2
  • C-RS1
  • C-RS3
  • C-RS6
  • C-RP7
  • C-RP9
Image listing compatible Hitachi remote control models

Image 4.1: A visual representation of the compatible HITACHI remote control models for which this PerFascin remote serves as a replacement.

4.2 Compatible TV Models

This remote control is compatible with a wide range of HITACHI TV models, including but not limited to:

  • L47-V09, L42-V09, L37-V09, L32-V09, L32-WP03, L32-WP300CS
  • L37-XP03, L37-XP035, L37-XP300CS, L42-XP03, L42-XP035
  • P42-HP03, P42-XP03, P42-XP035, P42-XP300CS, P46-XP03, P46-XP035
  • P50-XP03, P50-XP035, PMT-4230G, PMT-4240G, PMT-5030XG, PMT-5040XG
  • AVC-H8X, P46HYT11X, UT32-XP800, UT32-XP800B, UT32-XP800W
  • UT37-XP800B, UT37-XP800W, UT42-XP800B, UT42-XP800W, UT47-XP800B, UT47-XP800W
  • UT37-XP800, UT42-XP800, UT47-XP800, L32-XP05, L32-XP500CS
  • L37-XP05, L37-XP500CS, L37-ZP05, L42-XP05, L42-ZP05
  • P42-XP05, P42-XP500CS, P46-XP05, P50-XP05
  • L32-HR01, L32-HR01-1, L32-HR100CS, L37-X01, L37-XR01, L37-XR01-1, L37-XR01-2
  • P37-HR01, P37-HR01-1, P37-HR100CS, P42-HR01, P42-HR01-1, P42-HR01-2
  • P42-HR100CS, P42-HV01, P50-XR01, P50-XR01-1, L21-HR100CS
  • P37-HR02, P42-HR02, P50-HR02, L22-HP05, L26-HP05, L32-HP05
  • P42-HP05, P46-HP05, P42-HP06, L22-HP09, L26-HP09, L32-XP08
  • L37-XP08, L42-XP08, L32-XP07, L37-XP07, L42-XP07
  • L32-XP700CS, L37-XP700CS, L32-XP800CS, L32-GP3

5. Maintenance

5.1 Battery Replacement

When the remote control's response becomes sluggish or it stops functioning, it is time to replace the batteries. Follow the battery installation steps in Section 2.1.

5.2 Cleaning

To clean the remote control, gently wipe it with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.

5.3 Storage

Store the remote control in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If the remote will not be used for an extended period, it is recommended to remove the batteries to prevent leakage.

6. Troubleshooting

6.1 Remote Not Responding

  • Ensure the batteries are inserted correctly with the correct polarity (+/-).
  • Replace old batteries with new AAA alkaline batteries.
  • Check for any obstructions between the remote control and the TV's infrared receiver.
  • Ensure you are within the effective operating range (up to 10 meters) and pointing the remote directly at the TV.

6.2 Specific Buttons Not Working

  • Some buttons, like the 'Analog/Terrestrial' button, may not have a visual indicator (light) but should still function if supported by your TV model.
  • If a critical button is not working, try replacing the batteries.
  • Confirm that your TV model is listed in the compatibility section.

6.3 Intermittent Operation

  • Weak batteries can cause intermittent operation. Replace them.
  • Strong light sources (e.g., direct sunlight, fluorescent lights) can interfere with infrared signals. Try to minimize such interference.

7. Specifications

FeatureDescription
BrandPerFascin
ModelReplacement Remote for HITACHI TV (e.g., C-RT7)
FeaturesNo setup required
Connectivity TechnologyInfrared
Number of Buttons25
Maximum Range10 meters
Number of Batteries2
Battery TypeAAA Alkaline Batteries (sold separately)
Item Dimensions (L x W x H)23.5 cm x 4.5 cm x 2 cm
Dimensions of the PerFascin replacement remote control

Image 7.1: Detailed dimensions of the PerFascin replacement remote control, showing its length, width, and height.

8. Warranty and Support

8.1 Warranty Information

This PerFascin remote control comes with a 1 Year Warranty Against Manufacturer Defects. In case of product failure within the warranty period under normal use, we offer a return or refund. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

If you have any questions or encounter issues with your purchased product, please contact us via email. We are committed to providing the highest level of customer service.

For support, please refer to the contact information provided with your purchase or on the product packaging.

© 2026 PerFascin. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.