Polk Audio Monitor XT35 Slim Center Channel Speaker User Manual

Introduction

The Polk Monitor XT35 Slim Center Channel Loudspeaker is designed to deliver hi-resolution audio quality and clear dialogues for movies, games, and music. Featuring a Dynamically Balanced acoustic array with a 1-inch High-Resolution Terylene Tweeter and four 3-inch Polypropylene Woofers, the MXT35 provides room-filling, detailed sound. It is Hi-Res Audio Certified and compatible with Dolby Atmos and DTS:X surround sound AVRs and amplifiers. The Monitor XT Series speakers are timbre-matched, allowing for flexible system configurations.

Key Features:

• Slim design that does not obstruct TV view.
• 1-inch Terylene Tweeter for Hi-Res Audio.
• Four 3-inch Dynamically Balanced Woofers for clear mid-range and impactful bass.
• Dolby Atmos & DTS:X compatible.
• Wall-mountable with keyhole slots.
• Timbre-matched components for seamless integration with other Monitor XT speakers.

What's in the Box

Your Polk Audio Monitor XT35 Slim Center Channel Speaker package includes:

• Polk Audio Monitor XT35 Slim Center Channel Speaker

Setup

Proper placement and connection are crucial for optimal sound performance. The Monitor XT35 can be placed on a flat surface or wall-mounted.

Placement:

Position the center channel speaker directly below or above your television, centered horizontally. Ensure it is at ear level when seated for the best dialogue clarity. Its slim profile is designed to avoid blocking your TV's IR sensor.

The Polk Monitor XT35 speaker positioned on a media console below a television.

Wall Mounting:

The speaker features keyhole slots on the back for easy wall mounting. Use appropriate wall anchors and screws (not included) to secure the speaker. Ensure the mounting surface can support the speaker's weight (14 pounds).

Rear view of the Polk Monitor XT35, highlighting the keyhole slots for wall mounting and the speaker terminals.

Connections:

Connect the speaker to your AV receiver or amplifier using high-quality speaker wire. The Monitor XT35 uses nickel-plated 5-way binding posts. Ensure correct polarity (+ to + and - to -) for optimal sound. Refer to your receiver's manual for specific connection instructions.

Operating Instructions

Once connected, ensure your AV receiver or amplifier is powered on and configured to output audio to the center channel. Adjust the volume on your receiver. The Monitor XT35 is a passive speaker and does not have its own volume controls. For optimal sound, ensure your receiver's speaker setup is correctly calibrated, including speaker size, distance, and crossover frequencies.

A close-up view of the speaker's drivers, showcasing the 1-inch Terylene tweeter and four 3-inch woofers.

Maintenance

To maintain the appearance and performance of your Polk Audio Monitor XT35 speaker, follow these guidelines:

• Cleaning: Use a soft, dry cloth to wipe the cabinet. Avoid abrasive cleaners or solvents.
• Grille: The speaker grille is removable. If it becomes dusty, gently brush it with a soft brush or use a vacuum cleaner with a brush attachment on a low setting.
• Placement: Avoid placing the speaker in direct sunlight or near heat sources, as this can damage the cabinet finish and internal components.
• Handling: When moving the speaker, lift it carefully to avoid dropping or damaging it.

Troubleshooting

If you experience issues with your Monitor XT35 speaker, consider the following common troubleshooting steps:

• No Sound: Ensure the speaker wires are securely connected to both the speaker and the receiver/amplifier, with correct polarity. Verify the receiver is powered on and the correct input source is selected.
• Distorted Sound: Check for loose speaker wire connections. Reduce the volume on your receiver. Ensure the speaker is not overdriven.
• Poor Dialogue Clarity: Adjust the center channel level on your AV receiver. Ensure the speaker is positioned correctly (centered and at ear level).
• Uneven Sound: Check speaker placement and ensure no objects are obstructing the sound path. Verify receiver balance settings.

If problems persist, consult your AV receiver's manual or contact Polk Audio customer support.

Specifications

Warranty and Support

Polk Audio products typically come with a limited warranty. For specific warranty details, registration, and support, please refer to the documentation included with your product or visit the official Polk Audio website.

You can find more information and support at the Polk Audio Store.