Introduction
The VINGLI Pool Fence is designed to enhance safety around your in-ground swimming pool, preventing unauthorized access by children and pets. Constructed from premium mesh fabric and high-quality aluminum, this fence offers a durable and weather-resistant barrier. Its modular design allows for flexible installation and easy removal when not needed, providing peace of mind for pool owners.
Setup (Installation)
Proper installation is crucial for the effectiveness and safety of your VINGLI Pool Fence. Follow these steps carefully.
Part Listing
The 4Ft x 72Ft VINGLI Pool Fence package includes:
- 6 sets of 4' x 12' pool fence sections
- 5 plastic sleeves with caps
- 1 aluminum ruler
- Hooks and eyes for connections
- Instruction manual
Image: Detailed view of VINGLI pool fence components including mesh, poles, and connection hardware.
Required Tools
- Pencil/Chalk
- 5/8" Electric Drill (hammer drill recommended for concrete)
- Water gun (for cleaning debris)
- Hammer (for tapping sleeves)
- Tape Measure
Installation Steps
- Plan Layout: Determine the desired path for your fence. Ensure the fence is a minimum of 2-3 feet off the pool edge.
- Mark Positions: Use the provided aluminum ruler, pencil/chalk, and tape measure to accurately mark the drilling positions for each pole. Each 12-foot section requires 5 poles.
- Drill Holes: Using a 5/8" electric drill (a hammer drill is recommended for concrete surfaces), drill holes at the marked positions.
- Clean Holes: Use a water gun to remove any drilling debris from the holes.
- Insert Sleeves: Remove the cap from each plastic sleeve and insert the sleeve into the drilled hole. Place a wood block on top of the sleeve and gently tap it down with a hammer until it is flush with the ground. Keep the caps for future reuse after disassembly.
- Assemble Fence Sections: For fence gate sections, insert the PE tube into the fabric and then into the grooved part of the aluminum tube. Secure L-shaped pipe fittings with screws and nuts.
- Position Fence Poles: For easier insertion, angle the fence pole backward as you position it into the sleeve in the ground.
- Connect Sections: Use the provided hooks and eyes to securely connect adjacent fence panels. Flip up the spring to expose the hook, secure it, then release the spring to return it to its original position.
Video: Official VINGLI Pool Fence Installation Guide. This video demonstrates the step-by-step process for installing the pool fence, including marking, drilling, inserting sleeves, and connecting sections.
Image: A drill bit and ruler are used to mark precise positions for pool fence installation, ensuring proper alignment and stability.
Operating Instructions
The VINGLI Pool Fence is designed for both permanent and temporary use, offering flexibility for your needs.
- Connecting Sections: Use the integrated hook and eye latches to securely connect adjacent fence panels. Ensure the spring mechanism is engaged to prevent accidental opening.
- Opening Sections: To open a section, disengage the hook from the eye by pulling the spring back. This allows for temporary access to the pool area.
- Removing Sections: Individual 12-foot fence sections can be easily removed by lifting the poles out of their sleeves. This is ideal for events or when the pool is not in use and supervision is constant.
- Reinstalling Sections: To reinstall, simply align the poles with the sleeves and insert them. Reconnect the sections using the hooks and eyes.
Image: Close-up view of the hook and eye latch system, illustrating how to securely connect and disconnect pool fence sections for access.
Maintenance
To ensure the longevity and continued effectiveness of your VINGLI Pool Fence, regular maintenance is recommended.
- Cleaning: Periodically clean the mesh fabric and aluminum poles with mild soap and water to remove dirt, debris, and prevent buildup.
- Inspection: Regularly inspect all components, including the mesh, poles, sleeves, and connection hardware, for any signs of wear, damage, or corrosion.
- Storage: When not in use for extended periods, or during severe weather conditions, the fence can be rolled up for easy storage. Ensure it is clean and dry before storing to prevent mold or mildew. Store the plastic sleeve caps in a safe place for future use.
- Durability: The premium mesh fabric and high-quality aluminum construction are designed to withstand various weather conditions, including thunderstorms and high temperatures.
Troubleshooting
If you encounter any issues with your VINGLI Pool Fence, refer to the following common solutions:
- Fence Sagging or Instability: Ensure all poles are fully inserted into their ground sleeves and that the connecting hooks and eyes are securely latched. Verify that the ground sleeves are properly installed and flush with the surface.
- Difficulty Connecting Sections: Check for any debris in the hook and eye mechanisms. Ensure the fence sections are properly aligned before attempting to latch them.
- Missing Parts: If any parts are missing from your package, please contact VINGLI customer support immediately for assistance.
Specifications
| Brand | VINGLI |
| Model | 4Ft x 72Ft |
| Overall Dimensions (per 12ft section) | 4' (Height) x 12' (Length) |
| Main Material | Aluminum tube + 1000D Textilene fabric + Plastic sleeve |
| Color | Black |
| Item Weight | 72.8 Pounds |
| Required Assembly | Yes |
Image: Diagram illustrating the dimensions of the VINGLI pool fence, showing 4 feet height and 12 feet panel length, with 3 feet between poles.
Warranty & Support
VINGLI is committed to providing the best shopping experience and product quality.
- Warranty: This in-ground swimming pool fence is backed by a quality assurance commitment.
- Returns: Enjoy 30-day easy returns.
- Customer Support: If there is any problem or part missing, please contact VINGLI customer support. We are always here to provide the best solution.