VINGLI Under Sink Bathroom Cabinet Instruction Manual

1. Introduction

Thank you for choosing the VINGLI Under Sink Bathroom Cabinet. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new cabinet. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

This cabinet is designed to provide additional storage space under or beside a pedestal sink, featuring an adjustable shelf and a U-shaped cut-out for plumbing.

2. Safety Information

WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover, ALWAYS install the tipover restraint provided.

• NEVER put a TV on this product.
• NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lowest drawers.
• Do not defeat or remove the drawer interlock system.

This is a permanent label. Do not remove!

Ensure all parts are securely fastened before use. Do not use the product if any parts are damaged or missing. Keep small parts away from children during assembly.

3. Package Contents

Please verify that all components listed in your product's specific assembly manual are present before beginning assembly. Typically, the package includes:

• Cabinet panels (top, bottom, sides, back, doors, shelf)
• Hardware kit (screws, cam bolts, cam locks, wooden dowels, plastic embedded nuts, L-shaped brackets, anti-tipping strap)
• Door handles
• Assembly instructions

Note: Some models may not require plastic embedded nuts or wooden dowels. Refer to your specific product's instructions.

4. Setup and Assembly

Assembly is required for this product. It is recommended to assemble the cabinet on a soft, clean surface to prevent scratches. Two people are recommended for assembly.

4.1 General Assembly Steps

1. Identify all parts and hardware.
2. Attach cam bolts and wooden dowels to the designated panels as per your specific manual.
3. Connect panels using cam locks, ensuring they are tightened securely.
4. Install the back panel.
5. Attach the doors and handles.
6. Insert the adjustable shelf.
7. Install the anti-tipping device.

4.2 Key Assembly Visuals and Videos

Image 1: Cabinet Dimensions. The cabinet measures 23.6 inches wide, 11.8 inches deep, and 23.6 inches high. The U-shaped cut-out for the faucet hole is 7.68 inches wide and 8.66 inches deep.

Image 2: Key Features. This image highlights the U-shaped cut-out for plumbing, the adjustable shelf inside the cabinet, and the detailed workmanship of the door handles.

Image 3: Sink Compatibility. The cabinet is designed to accommodate both vessel sinks and pedestal sinks, with an open back for plumbing access.

5. Operating Instructions

Once assembled, the VINGLI Under Sink Bathroom Cabinet is ready for use. The primary function is storage.

5.1 Adjusting the Shelf

The internal shelf is adjustable to accommodate items of various heights. To adjust:

1. Empty the shelf of all contents.
2. Carefully lift the shelf and remove it from its current position.
3. Align the shelf pins with the desired holes on the cabinet sides.
4. Lower the shelf onto the pins, ensuring it is level and secure.

5.2 Door Operation

The cabinet features two doors for enclosed storage. Open and close the doors gently using the provided handles. Avoid forcing the doors to prevent damage to hinges or panels.

6. Maintenance and Care

To ensure the longevity and appearance of your VINGLI Under Sink Bathroom Cabinet, follow these care guidelines:

• Cleaning: The grey painted surface is easy to clean. Wipe regularly with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Moisture Protection: The cabinet is made from durable P2 MDF (Medium Density Fiberboards) designed to resist moisture. However, prolonged exposure to excessive water should be avoided. Wipe up spills immediately.
• Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Retighten as necessary.
• Avoid Overloading: Do not place excessively heavy items on the shelves or doors, as this can cause structural damage.

7. Troubleshooting

If you encounter any issues with your cabinet, refer to the following common problems and solutions:

• Wobbly Cabinet: Ensure all cam locks and screws are fully tightened. Verify the cabinet is placed on a level surface. Adjust feet if applicable (this model is floor mount, so ensure the floor is even).
• Doors Not Aligning: Check that hinges are correctly installed and tightened. Minor adjustments can often be made by slightly loosening and repositioning the hinge screws.
• Missing Parts: If any parts were missing upon arrival, contact customer support immediately with your purchase details.
• Chemical Odor: New furniture may sometimes have a slight odor. Ensure good ventilation in the room. The odor should dissipate over a few days.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. VINGLI is committed to providing quality products and customer satisfaction.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact VINGLI customer support through the retailer's platform or the official VINGLI website.

Please have your model number (B099Z772QL) and purchase date available when contacting support.