Jebao MCP-150 Smart Cross Flow Pump User Manual

1. Introduction

The Jebao MCP-150 Smart Cross Flow Pump is designed to create natural wave motion within saltwater aquariums. Utilizing advanced crossflow technology, it generates a 360-degree flow pattern, effectively eliminating dead spots in your tank. This pump features SINE wave technology for quiet and stable performance, a double impeller structure for efficient water movement, and is constructed without exposed copper elements, making it suitable for both marine and fresh water environments.

The pump is equipped with an LCD display controller for manual adjustments and supports Wi-Fi connectivity for control via iOS and Android devices. Integrated IC electronic detection provides dry/locked rotor protection and automatic power-off upon no water detection, ensuring safety and longevity.

Key Features:

• Wi-Fi (iOS + Android) and Manual Controller with LCD Display
• SINE Wave Technology for Ultra-Quiet, Stable Performance
• Cross Wave Double Impeller Structure for 360-Degree Flow
• No Exposed Copper Elements, Suitable for Marine and Fresh Water
• IC Electronic Detection with Dry/Locked Rotor Protection

2. Package Contents

Verify that all items listed below are included in your package:

• Jebao MCP-150 Smart Cross Flow Pump
• LCD Display Controller
• Power Adapter (DC 24V 55W, 3-prong US plug)
• Magnetic Mounting Base
• User Manual (this document)

Figure 1: All components included in the Jebao MCP-150 package, including the pump, controller, power adapter, and magnetic base.

3. Setup

3.1 Physical Installation

1. Attach the Magnetic Base: Securely attach the magnetic base to the pump unit. Ensure the rubber buckles are properly fastened on both sides.
2. Position the Pump: Place the pump inside your aquarium at the desired location. Use the external magnet to hold the pump firmly against the glass.
3. Connect the Controller: Connect the pump's cable to the LCD display controller. Ensure the connection is secure.
4. Connect Power: Plug the power adapter into the controller, then plug the power adapter into a suitable electrical outlet.

3.2 Wi-Fi Setup (Optional)

For Wi-Fi control, download the Jebao Aqua app from your device's app store (iOS/Android). Note that the device primarily supports 2.4GHz Wi-Fi networks. If you experience connection issues with a mesh Wi-Fi system, consider temporarily disabling 5GHz or using a dedicated 2.4GHz network for initial setup.

1. Prepare Network: Ensure your mobile device is connected to a 2.4GHz Wi-Fi network.
2. Open App: Launch the Jebao Aqua app and select 'Add a Wi-Fi device'.
3. Select Device: Choose 'Wave Pump' from the device list.
4. Enter Wi-Fi Details: Confirm your 2.4GHz network name is displayed and enter its password.
5. Switch to AP Network: On the next screen, switch from 'Smart Network' to 'AP Network' tab.
6. Controller AP Mode: Put the pump controller into AP Network mode by long-pressing the network button until the Wi-Fi logo flashes with the AP indicator.
7. Connect Phone to Pump: Connect your phone to the new Wi-Fi network named 'Jebao_WiFi-XXX' (where XXX is a unique identifier) using the password '123456789'.
8. Complete Setup: Return to the app and click 'Next' to complete the connection. Your phone should then reconnect to your home 2.4GHz network, and the controller will also connect.

4. Operating Modes

The Jebao MCP-150 controller allows you to select various wave-making modes and adjust flow rates and frequencies to suit your aquarium's needs.

4.1 Controller Operation

• Power On/Off: Long press the middle button on the controller to turn the pump on or off.
• Mode Selection: Press the 'Mode' button to cycle through different wave-making modes. The LCD display will show the current mode and an image representing the wave pattern.
• Flow Rate Adjustment: Use the Up/Down arrow buttons to adjust the flow rate (power) of the pump. Tap for fine adjustments or press and hold for quicker changes.
• Frequency Adjustment: In certain modes, you can adjust the frequency of the wave pattern. Long press the 'Mode' button, then use the Up/Down arrows to change the frequency.
• Feed Mode: Quickly press the middle button to enter Feed Mode. The pump will pause for a set duration (e.g., 10 minutes) to allow for feeding without disturbing food. Press again to exit Feed Mode early.
• Night Mode: The controller may automatically reduce flow rate when it detects darker surroundings, simulating natural night conditions.

4.2 Wi-Fi App Control

Once connected via Wi-Fi, the Jebao Aqua app provides comprehensive control over your pump:

• Remote Control: Turn the pump on/off, select modes, and adjust flow rate and frequency directly from your smartphone.
• Programming: Set schedules for different modes and intensities throughout the day.
• Linkage Function: If you have multiple Jebao pumps, you can set them up in a master/slave configuration for synchronized or alternating wave patterns.

5. Maintenance

Regular maintenance is crucial for the optimal performance and longevity of your Jebao MCP-150 pump. Always unplug the power adapter before performing any maintenance.

5.1 Cleaning the Pump

1. Disconnect Power: Unplug the power adapter from the electrical outlet.
2. Remove from Tank: Carefully remove the pump from the aquarium.
3. Disassemble:
   • Undo the rubber buckles on both sides of the magnetic base.
   • Unscrew the screws on both sides of the pump casing.
   • Gently twist left and right to remove the impellers from both ends of the pump.
4. Clean Components: Clean all disassembled parts (impellers, casings, ceramic rod) with a soft brush and fresh water. Remove any algae, debris, or mineral buildup.
5. Lubricate (Optional): Apply a small amount of aquarium-safe lubricant (e.g., petroleum jelly) to the ceramic shaft of the impellers to ensure smooth operation and prevent wear.
6. Reassemble: Carefully reassemble the pump in reverse order of disassembly. Ensure all parts are securely fitted and screws are tightened.
7. Reinstall: Place the cleaned and reassembled pump back into the aquarium and reconnect the power.

6. Troubleshooting

If you encounter issues with your Jebao MCP-150 pump, refer to the following common troubleshooting steps:

• Pump Not Turning On:
  • Check all power connections to ensure they are secure.
  • Verify the power adapter is functioning correctly and the outlet has power.
  • Ensure the pump is fully submerged in water to prevent dry running protection from activating.
• Weak or No Flow:
  • Check for blockages in the impeller or pump casing. Perform a thorough cleaning as described in the Maintenance section.
  • Ensure the flow rate setting on the controller or app is not set too low.
• Unusual Noise:
  • A whining noise can sometimes occur. Check for any debris caught in the impeller.
  • Ensure the pump is securely mounted and not vibrating against the aquarium glass.
  • Lubricate the impeller shaft during maintenance.
• Wi-Fi Connection Issues:
  • Confirm your router is broadcasting a 2.4GHz signal. The pump does not support 5GHz Wi-Fi.
  • Follow the detailed Wi-Fi setup instructions in Section 3.2 carefully, especially regarding AP Network mode.
  • Ensure your mobile device is connected to the correct 2.4GHz network during setup.
• Magnetic Base Issues:
  • While the product is designed with corrosion-resistant materials, inspect the magnetic base for any signs of rust or degradation over time, especially if using in harsh conditions.

7. Specifications

8. Warranty and Support

Specific warranty information for the Jebao MCP-150 Smart Cross Flow Pump is typically provided at the point of purchase or within the product packaging. Please refer to your purchase documentation for details regarding warranty coverage and duration.

For technical support, troubleshooting assistance, or inquiries about replacement parts, please contact Jebao customer service through their official website or the contact information provided in your product packaging.