Introduction
This manual provides detailed instructions for the operation and maintenance of your JAJALUYA LED Par Lights. These high-quality stage lights feature 36 LED lamp beads, offering low power consumption and stable lighting performance. The durable aluminum shell and double bracket design ensure stability and versatility for various applications. With 7 functional lighting modes and easy control options, these lights are suitable for a wide range of events.
What's in the Box
Each package of JAJALUYA LED Par Lights includes the following components:
- LED Par Light Unit (36 LED)
- Remote Control
- Mounting Bracket (double bracket design)
- Mounting Screws and Feet
- Power Cable
- User Manual
Figure 1: Package contents of the LED Par Light, showing the main light unit, remote control, mounting bracket, and power cable.
Setup
The JAJALUYA LED Par Lights are designed for easy setup, allowing for versatile placement options such as hanging or floor mounting. Follow these steps to set up your light unit:
- Attach the Mounting Bracket: The light unit comes with a double bracket design for stability. Secure the bracket to the sides of the light unit using the provided screws. Ensure the screws are tightened for a stable setup. The bracket allows for both upright standing and angled positioning.
- Positioning: You can hang the LED lights anywhere using the bracket's mounting holes or place them directly on the floor. Adjust the angle of the light as desired for optimal illumination.
- Remote Control Activation: Each DJ light includes a separate remote control. Before first use, pull out the protective tab from the remote control to activate its battery.
- Power Connection: Connect the power cable to the light unit and then to a suitable power outlet. The unit will automatically enter a demo mode upon power-on.
Figure 2: Remote control layout and the back panel of the light unit, highlighting connection points and controls.
Operating Modes
The LED Par Lights offer 7 versatile lighting modes, easily controlled via the included remote or a DMX system:
- Static Color Mode: Select a single, steady color from the RGB spectrum.
- Color Mixing Mode: Combine red, green, and blue LEDs to create a wide array of custom colors.
- Fade In and Fade Out Mode: Colors smoothly transition from one to another.
- Jump Mode: Colors change abruptly, creating a dynamic effect.
- Strobe Mode: Lights flash rapidly, adjustable for speed.
- Sound Activation Mode: Lights react to the rhythm and beat of music or ambient sound. This mode is highly effective for party environments.
- Auto Play Mode: The light unit cycles through various pre-programmed lighting effects automatically.
- Master-Slave Mode: Connect multiple units via DMX cables, allowing one unit to control the others for synchronized effects.
- DMX Control: For advanced control, connect the lights to a DMX system using a DMX cable and operate them via a DMX controller.
Use the remote control to switch between modes, adjust brightness, and fine-tune color settings. The "+/-" buttons can control the color changing speed in dynamic modes.
Figure 3: Examples of static color outputs from the LED Par Light.
Figure 4: Detailed view of the remote control functions for the LED Par Light.
Maintenance
To ensure the longevity and optimal performance of your LED Par Lights, follow these maintenance guidelines:
- Cleaning: Regularly wipe the exterior of the light unit with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
- Ventilation: Ensure that the ventilation openings on the unit are not obstructed to prevent overheating.
- Storage: When not in use, store the lights in a cool, dry place, preferably in their original packaging or a protective case, to prevent damage.
- Cable Inspection: Periodically check power and DMX cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.
Troubleshooting
If you encounter issues with your LED Par Lights, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, remote battery dead, unit malfunction. | Check power connection and outlet. Ensure remote tab is removed or replace battery. If issue persists, contact support. |
| Remote control not responding. | Remote battery dead or tab not removed. Obstruction between remote and light. | Remove battery tab or replace battery. Ensure clear line of sight to the light's sensor. |
| Lights are not synchronized in Master-Slave mode. | Incorrect DMX connection or mode setting. | Verify DMX cable connections. Ensure master unit is set to Master mode and slave units are set to Slave mode. |
| Lights flicker or behave erratically. | Power fluctuations, loose connection, DMX signal interference. | Ensure stable power supply. Check all cable connections. If using DMX, check DMX terminator and cable quality. |
If you are unable to resolve the issue using these steps, please contact customer support.
Specifications
- Brand: JAJALUYA
- Model: B262
- Light Source Type: Light Emitting Diode (LED)
- Number of Light Sources: 36 LEDs
- Color: RGB (Red, Green, Blue)
- Material: Aluminum
- Finish Type: Aluminum
- Shape: Round
- Power Source: Corded Electric
- Voltage: 220 Volts
- Wattage: 36 watts
- Item Weight: 13.2 Pounds (for 8-pack, individual unit weight is lighter)
- Product Dimensions: 14.56"L x 14.37"W x 9.25"H
- Mounting Type: Floor Mount (with adjustable bracket)
- Beam Angle: 35 Degrees
- Control Features: Remote control, RGB, Sound Activated, DMX Control
Warranty and Support
Your JAJALUYA LED Par Lights come with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact the seller directly. Extended protection plans may also be available for purchase.
For any questions, technical assistance, or support needs, please feel free to contact us via email. We are committed to providing prompt assistance and resolving any issues you may encounter.
