Franke Joy Cocktail SemiPro Kitchen Tap Instruction Manual

1. Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your Franke Joy Cocktail SemiPro Kitchen Tap. Please read these instructions carefully before installation and retain them for future reference. This mixer tap features a semi-professional design with a pull-down spray function, a side lever for operation, and a durable chrome-plated brass construction.

2. Safety Information

• Always turn off the main water supply before beginning any installation or maintenance work.
• Ensure all connections are secure to prevent leaks.
• If you are unsure about any part of the installation process, consult a qualified plumber.
• Do not use abrasive cleaners or harsh chemicals on the tap's surface, as this may damage the finish.
• Keep small parts out of reach of children.

3. Package Contents

Verify that all components are present before starting installation:

• Franke Joy Cocktail SemiPro Kitchen Tap body
• Flexible stainless steel connection hoses
• Mounting hardware (gasket, washer, fixing nut)
• Built-in water filter (if applicable to your model variant)
• Instruction manual (this document)

4. Specifications

Figure 1: Technical drawing illustrating the dimensions of the Franke Joy Cocktail SemiPro Kitchen Tap, including height, reach, and mounting hole diameter.

5. Setup and Installation

Professional installation is recommended. Ensure you have the necessary tools (adjustable wrench, screwdriver, sealant tape) before proceeding.

5.1 Pre-Installation

1. Turn off the main water supply to your kitchen.
2. Clear the area under the sink for easy access.
3. If replacing an old tap, remove it and clean the mounting surface.

5.2 Mounting the Tap

1. Insert the tap body into the Ø 35 mm mounting hole on your sink or countertop.
2. From underneath the sink, place the rubber gasket, then the metal washer, over the threaded shank of the tap.
3. Thread the fixing nut onto the shank and tighten it securely with an adjustable wrench until the tap is stable. Do not overtighten.

5.3 Connecting Water Lines

1. Connect the flexible stainless steel hoses from the tap to your hot and cold water supply lines. The hot water connection is typically on the left, and cold on the right.
2. Use sealant tape on the threads of the supply lines for a watertight seal.
3. Tighten connections firmly with an adjustable wrench, but avoid excessive force.

5.4 Connecting the Filter (if applicable)

If your model includes a built-in water filter, follow the specific instructions provided with the filter cartridge for connection and initial flushing.

5.5 Final Checks

1. Slowly turn on the main water supply.
2. Check all connections for leaks. Tighten any leaking connections immediately.
3. Open the tap lever to flush out any air or debris from the lines.

Figure 2: Front view of the Franke Joy Cocktail SemiPro Kitchen Tap, showcasing its chrome finish, high arching spring-coil spout, and pull-down sprayer.

6. Operating Instructions

The Franke Joy Cocktail SemiPro Kitchen Tap is designed for intuitive use.

6.1 Water Flow and Temperature Control

• Side Lever: The single side lever controls both water flow and temperature.
• Flow: Lift the lever upwards to increase water flow. Push it downwards to decrease flow and turn off the tap.
• Temperature: Move the lever to the left for hot water and to the right for cold water. Adjust the position between left and right to achieve the desired temperature.

6.2 Using the Pull-Down Sprayer

• Engaging the Sprayer: Gently pull the sprayer head downwards from its housing at the end of the spring-coil spout.
• Spray Modes: The sprayer head typically features a button or switch to toggle between different spray patterns (e.g., aerated stream and powerful spray). Press this button to select your preferred mode.
• Retracting the Sprayer: Once finished, guide the sprayer head back into its housing. The spring-coil design assists in smooth retraction.

Figure 3: Close-up view of the Franke Joy Cocktail SemiPro Kitchen Tap's pull-down sprayer, extended from its housing, demonstrating its flexibility.

Figure 4: The Franke Joy Cocktail SemiPro Kitchen Tap installed in a kitchen sink setting, highlighting its contemporary design and functionality.

7. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and optimal performance of your tap.

7.1 Cleaning the Tap Surface

• Clean the chrome finish regularly with a soft cloth and mild soap and water.
• Rinse thoroughly with clean water and dry immediately with a soft, dry cloth to prevent water spots.
• Do not use abrasive sponges, scouring pads, or chemical cleaners containing acids, ammonia, or bleach, as these can damage the chrome plating.

7.2 Cleaning the Sprayer Head

• Over time, mineral deposits can build up in the sprayer nozzles, affecting water flow.
• Gently rub the rubber nozzles with your finger or a soft brush to dislodge any deposits.
• For stubborn buildup, unscrew the sprayer head (if detachable) and soak it in a solution of equal parts white vinegar and water for 30 minutes, then rinse thoroughly.

7.3 Filter Replacement (if applicable)

If your tap includes a built-in water filter, refer to the filter's specific instructions for recommended replacement intervals and procedures. Typically, filters need to be replaced every 6-12 months depending on water quality and usage.

8. Troubleshooting

Here are solutions to common issues you might encounter:

If these solutions do not resolve the issue, please contact Franke customer support.

9. Warranty Information

Your Franke Joy Cocktail SemiPro Kitchen Tap is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the warranty card included with your product or visit the official Franke website.

10. Support

For further assistance, technical support, or to order replacement parts, please contact Franke customer service through their official website or the contact information provided in your product packaging. When contacting support, please have your product model (Joy Cocktail SemiPro) and ASIN (B0993WPDYT) ready.

Franke Official Website: www.franke.com