VGR V-313 Professional 3-in-1 Rechargeable Shaver Instruction Manual

Introduction

Thank you for choosing the VGR V-313 Professional 3-in-1 Rechargeable Shaver. This device is designed for versatile grooming, offering a rotary shaver, a nose/ear trimmer, and a precision trimmer. Please read this manual carefully before using the product to ensure safe and optimal performance. Keep this manual for future reference.

Safety Information

Caution: This shaver has sharp blades. Avoid use near water while charging to prevent electrical shock. Always hold the shaver away from your face while charging. Clean and dry the shaver after each use to prevent bacterial growth and ensure optimal performance.

• Do not immerse the charging cable or adapter in water.
• Keep the device out of reach of children.
• Ensure the device is fully charged before first use.
• Do not disassemble or attempt to repair the device yourself. Contact qualified service personnel.
• Store the shaver in a dry place when not in use.

Package Contents

The VGR V-313 Professional 3-in-1 Rechargeable Shaver package typically includes the following items:

• VGR V-313 Shaver Body
• Rotary Shaver Head (pre-attached or separate)
• Nose/Ear Trimmer Head
• Precision Trimmer Head
• USB Charging Cable
• Cleaning Brush
• Protective Cap for Shaver Head

Image: All components included in the VGR V-313 package, including the shaver body, three interchangeable heads, charging cable, and cleaning brush.

Product Overview

The VGR V-313 is a versatile grooming tool featuring a main body and three interchangeable heads for different functions.

Image: The VGR V-313 shaver body displayed with its three interchangeable heads: rotary shaver, precision trimmer, and nose/ear trimmer.

Main Shaver Body

• Power Button: Turns the shaver on and off.
• Charging Port: Located at the bottom for the USB charging cable.
• LED Display: Indicates battery level and charging status.

Interchangeable Heads

1. Rotary Shaver Head: Equipped with three floating rotary blades for a close and comfortable shave.
2. Nose/Ear Trimmer Head: Designed for safely trimming unwanted hair in the nose and ears.
3. Precision Trimmer Head: For detailing sideburns, beards, and mustaches.

Image: A detailed view of the VGR V-313's rotary shaver head, highlighting its three independent cutting elements.

Image: The VGR V-313 shaver body shown with the nose/ear trimmer head attached, alongside the separate precision trimmer head.

Setup

Charging the Shaver

1. Ensure the shaver is turned off.
2. Connect the USB charging cable to the charging port at the bottom of the shaver.
3. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a USB port.
4. The LED display will indicate the charging status. A full charge typically takes approximately 2 hours.
5. Disconnect the shaver from the charger once fully charged. Do not overcharge.

Attaching and Detaching Heads

1. To attach a head, align the head with the shaver body and gently push until it clicks into place.
2. To detach a head, firmly grasp the head and pull it away from the shaver body.
3. Always ensure the shaver is turned off before changing heads.

Operating Instructions

Using the Rotary Shaver Head

1. Ensure the rotary shaver head is securely attached.
2. Press the power button to turn on the shaver.
3. For a dry shave, ensure your skin is clean and dry. Move the shaver in small, circular motions against the direction of hair growth.
4. For a wet shave, apply shaving foam or gel to your face. Move the shaver in small, circular motions. Rinse the shaver head under running water during the shave to prevent clogging.
5. After shaving, press the power button to turn off the shaver.

Using the Nose/Ear Trimmer Head

1. Attach the nose/ear trimmer head to the shaver body.
2. Turn on the shaver.
3. Gently insert the trimmer tip into your nostril or ear canal, no deeper than 5mm.
4. Move the trimmer in a circular motion to cut unwanted hair.
5. Turn off the shaver after use.

Using the Precision Trimmer Head

1. Attach the precision trimmer head to the shaver body.
2. Turn on the shaver.
3. Use the trimmer to define beard lines, sideburns, or trim specific areas with precision.
4. Turn off the shaver after use.

Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your VGR V-313 shaver.

Cleaning the Shaver Heads

1. Always turn off and unplug the shaver before cleaning.
2. Detach the shaver head.
3. Rinse the detached head under warm running water to remove hair clippings and debris. For thorough cleaning, use the provided cleaning brush to remove stubborn particles.
4. Allow the head to air dry completely before reattaching or storing.
5. The shaver body can be wiped clean with a damp cloth. Do not rinse the shaver body directly under water, especially the charging port.

Storage

• Store the shaver in a cool, dry place, away from direct sunlight and high temperatures.
• Use the protective cap for the rotary shaver head when not in use to prevent damage to the blades.

Troubleshooting

If you encounter issues with your VGR V-313 shaver, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

Specifications

• Model Number: V-313
• Brand: VGR
• Type: Clipper & Trimmer
• Targeted Group: Men
• Number of Heads: 3 (Rotary Shaver, Nose/Ear Trimmer, Precision Trimmer)
• Operating Function: Wet & Dry
• Power Source: Electric & Battery (Rechargeable Lithium Battery)
• Number of Speed Settings: 1
• Blade Material: Stainless Steel
• Item Weight: 11 g
• Special Features: Dry Shave, Rechargeable, Wet

Warranty and Support

VGR products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official VGR website. Keep your purchase receipt as proof of purchase.