VASAGLE ULGT810A01

VASAGLE 5-Tier Corner Shelf Stand Instruction Manual

Model: ULGT810A01

1. Introduction

Thank you for choosing the VASAGLE 5-Tier Corner Shelf Stand. This manual provides essential information for the safe assembly, proper use, and maintenance of your new corner shelf. Please read these instructions carefully before assembly and retain them for future reference.

VASAGLE 5-Tier Corner Shelf Stand in a living room

Image 1.1: The VASAGLE 5-Tier Corner Shelf Stand, Metallic Gold.

2. Safety Information

To ensure safe use of this product, please observe the following:

Close-up of the anti-tip kit attached to the top of the corner shelf

Image 2.1: The anti-tip kit should be securely fastened to the wall for safety.

3. Package Contents

Please check that all parts are present and in good condition before beginning assembly. If any parts are missing or damaged, please contact customer support.

4. Assembly Instructions

Assembly is straightforward. It is recommended to have a second person assist for easier installation. Do not fully tighten screws until all components are loosely assembled to allow for adjustments.

Step-by-Step Assembly

  1. Unpack and Identify: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided diagram.
  2. Assemble Frame Sections: Connect the vertical steel frame sections (A, B, E, F) according to the diagram. Secure them loosely with the provided screws and Allen key.
  3. Insert Glass Shelves: Place the tempered glass shelves (C, D) into their designated slots within the frame. Ensure the buffer pads are correctly positioned to absorb shock and reduce noise.
  4. Attach Adjustable Feet: Screw the adjustable feet (G, H) into the bottom of the frame.
  5. Final Tightening: Once all parts are in place and the shelf is upright, gradually tighten all screws until secure.
  6. Install Anti-Tip Kit: Securely attach the anti-tip kit to the top rear of the shelf and to a solid wall stud or using appropriate wall anchors.
Diagram showing the assembly steps for the VASAGLE corner shelf with labeled parts

Image 4.1: Assembly diagram with labeled components (A, B, C, D, E, F, G, H).

Detailed assembly diagram showing how panels and frames connect

Image 4.2: Visual guide for connecting shelf panels and frames.

5. Usage and Placement

The VASAGLE 5-Tier Corner Shelf Stand is designed to maximize corner space and provide versatile storage and display options. Its compact triangular shape fits perfectly into 90-degree corners.

VASAGLE corner shelf stand holding various decorative items in a living room

Image 5.1: The corner shelf stand utilized in a living room setting.

VASAGLE corner shelf stand used as a bedside organizer in a bedroom

Image 5.2: The corner shelf stand providing storage in a bedroom.

6. Maintenance and Care

Proper care will ensure the longevity and appearance of your VASAGLE corner shelf.

Hand wiping a tempered glass shelf with a cloth

Image 6.1: Tempered glass shelves are easy to clean with a soft cloth.

7. Troubleshooting

If you encounter any issues with your corner shelf, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Shelf is wobbly or unstable.Uneven floor; loose screws; anti-tip kit not installed.Adjust the leveling feet at the bottom of the frame. Ensure all screws are tightened. Install the anti-tip kit securely to the wall.
Parts do not align during assembly.Screws tightened too early; incorrect orientation of parts.Loosen all screws slightly, adjust the alignment of the parts, then gradually tighten. Double-check the instruction diagram for correct part orientation.
Missing parts.Packaging error.Review the package contents list. If parts are genuinely missing, contact customer support with your model number and purchase details.
Close-up of adjustable feet on the corner shelf base

Image 7.1: Adjustable feet help stabilize the shelf on uneven surfaces.

8. Product Specifications

Detailed specifications for the VASAGLE 5-Tier Corner Shelf Stand:

FeatureDetail
Model NameULGT810A01
ColorMetallic Gold
MaterialSteel, Tempered Glass
Product Dimensions (L x W x H)11 x 11 x 62.2 inches (27.9 x 27.9 x 158 cm)
Distance Between Each Shelf11.8 inches (30 cm)
Product Weight11.7 lb (5.3 kg)
Max. Static Load Capacity per Shelf11 lb (5 kg)
Mounting TypeFloor Mount (with anti-tip kit for wall attachment)
Assembly RequiredYes
Care InstructionsWipe with Dry Cloth
Diagram showing the dimensions of the VASAGLE 5-Tier Corner Shelf Stand

Image 8.1: Product dimensions and shelf spacing.

9. Warranty and Support

For warranty information, missing parts, or any product-related inquiries, please contact VASAGLE customer support through your retailer or the official VASAGLE website. Please have your model number (ULGT810A01) and purchase details ready when contacting support.