ONVIAN Bicycle Motorcycle Anti-Theft Alarm with 2 Remotes

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ONVIAN Bicycle Motorcycle Anti-Theft Alarm. Please read this manual carefully before use to ensure proper functionality and safety.

2. Package Contents

• Alarm Unit (Main Host)
• Remote Control (x2)
• Double-sided Tape for Installation
• Cable Ties
• User Manual (Japanese, refer to this document for English instructions)

3. Product Features

• Dual Remote Control: The kit includes two remote controls that can simultaneously operate the alarm unit. Initial pairing may be required.
• Adjustable Volume: Features 3-level volume adjustment with a maximum output of 113dB, allowing users to select an appropriate sound level for different environments.
• Adjustable Sensitivity: Offers 7 sensitivity levels (Do, Re, Mi, Fa, Sol, La, Si) to prevent accidental triggers while ensuring effective detection. The factory default is the highest level (Do).
• SOS Function: When activated (default OFF), the alarm automatically calls for help if the bicycle tilts beyond 45 degrees in a non-alert state, enhancing outdoor cycling safety.
• Vehicle Search Function: Use the bell button on the remote control to locate your parked vehicle.
• Easy Installation: Simple installation using double-sided tape or cable ties, suitable for various applications including bicycles, motorcycles, doors, and windows.

4. Setup & Installation

The alarm unit can be installed using either the provided double-sided tape or cable ties. For optimal anti-theft effectiveness, it is recommended to install the alarm in a concealed location not easily accessible from the outside. Ensure the installation location is not exposed to water to maintain alarm effectiveness.

Installation Steps:

1. Clean the surface where the alarm unit will be attached.
2. Peel off the protective film from the double-sided tape and firmly press the alarm unit onto the desired location (e.g., bicycle frame, seat post, door/window frame).
3. Alternatively, use the provided cable ties to secure the alarm unit around a suitable part of your bicycle, such as the handlebar or seat post. Trim any excess cable tie length.

Video: Installation and Basic Operation

5. Operating Instructions

5.1 Arming and Disarming

• Arm: Press the lock button on the remote control once. The alarm unit will emit a 'Beep' sound, indicating it is armed.
• Disarm: Press the unlock button on the remote control once. The alarm unit will emit a 'Beep' sound, indicating it is disarmed.

5.2 Volume Adjustment

The alarm offers 3 adjustable volume levels. To adjust the volume:

1. Press and hold the bell button on the remote control until the LED indicator on the remote turns off and then re-illuminates. The alarm unit will continuously beep during this process (ignore the alarm sound).
2. While in setting mode, repeatedly press the bell button to cycle through the 3 volume levels (high to low). Each press will change the volume.
3. Release the button to save the desired volume level.

5.3 Sensitivity Adjustment

The alarm has 7 adjustable sensitivity levels. To adjust the sensitivity:

1. Press and hold the unlock button on the remote control until the LED indicator on the remote turns off and then re-illuminates. The alarm unit will continuously beep during this process (ignore the alarm sound).
2. While in setting mode, repeatedly press the unlock button to cycle through the 7 sensitivity levels (high to low). Each press will change the sensitivity, indicated by a different number of beeps (e.g., 7 beeps for highest, 1 beep for lowest).
3. Release the button to save the desired sensitivity level.

5.4 SOS Function

The SOS function is OFF by default. To activate or deactivate it:

1. Press and hold the bell button on the remote control until the LED indicator on the remote turns off and then re-illuminates. The alarm unit will continuously beep during this process.
2. Press the lightning bolt button once. The alarm unit will emit one 'Bi' sound, entering calibration mode.
3. The alarm unit will then emit 5 'Bi' beeps if the SOS function is correctly adjusted and turned ON. If it emits two long 'Bi...Bi' sounds, it indicates a calibration error, and the SOS function will not be ON. The host needs to be placed in a static mode before performing SOS calibration.

When the SOS function is ON, if the bicycle tilts beyond 45 degrees in a non-alert state, the alarm will automatically sound to call for help.

5.5 Vehicle Search Function

Press the bell button on the remote control to make the alarm unit emit a sound, helping you locate your vehicle in a crowded area.

6. Battery Information & Replacement

The alarm unit and remote controls come with pre-installed batteries.

• Alarm Unit Battery: 3 x AAA dry cell batteries. Expected life: 1-3 months with daily use, approximately 6 months in continuous standby.
• Remote Control Battery: 1 x 12V/27A alkaline battery. Expected life: Over 1 year with daily use (assuming 5 remote uses per day).

Battery Replacement:

If the remote control cannot operate the main unit, reinsert the batteries or replace them with new ones. After replacing batteries, re-match the alarm unit and remote control. Refer to the original Japanese manual for detailed matching instructions if needed.

7. Troubleshooting

• Alarm not responding to remote: Check remote control battery. Replace if necessary and re-match the remote with the alarm unit.
• Alarm not sounding or too quiet: Check alarm unit batteries. Replace if necessary. Adjust volume settings as described in Section 5.2.
• False alarms: Adjust sensitivity settings as described in Section 5.3. Ensure the alarm is installed in a stable location.
• SOS function not working: Ensure the SOS function is activated (ON) as described in Section 5.4. Ensure the alarm unit is calibrated correctly.

8. Specifications

9. Safety Precautions

• Do not expose the alarm unit to direct water contact to ensure optimal performance, as waterproof performance may vary.
• Keep out of reach of children.
• Do not attempt to disassemble or modify the device, as this may void the warranty and cause malfunction.
• Ensure batteries are inserted with correct polarity.
• Dispose of used batteries responsibly according to local regulations.

10. Warranty & Support

For warranty information or technical support, please refer to the product packaging or contact ONVIAN customer service. Keep your purchase receipt as proof of purchase.