User Manual for Onvian models including: A2 115dB Bike Alarm with Remote, A2, 115dB Bike Alarm with Remote, Bike Alarm with Remote, Alarm with Remote
CA0328 User Manual (PDF) Onvian Onvian Onvian,115dB,Bike,Alarm,with,Remote,,USB,Rechargeable,Wireless,Antitheft,Alarm,Systems,for,Motorcycle,Bicycle,Scooter,Car,,Sensitive,Motion,Detection,Security,Bike,Alarm,Volume,Adjustable,,
ONVIAN Rechargeable Bike Alarm with Wireless Remote, Motion Sensor Alarm for E-Bike Motorcycle Bicycle Scooter Car, Volume Adjustable Motorcycle Alarm Sensitive Motion Detection Security Bike Alarm : Automotive
User Manual A2 Anti-theft Alarm Power Indicator Wireless Bike Search Personalized Setting Pleasant Ringtone Concealed Installation Charge to activate the remote control before the rst use !!! 15 USB Charging Long Batte Life Concealed Flash Placement Industrial Plastic Installation IPX5 Waterproof Electric Bell Product information Personalized Setting Power Display Wireless Bike Search modelA2 Color: Product size: black 46X43X41(MM) texture of material: Net weight: PC+ABS 66g Batte capacity: 400mAh(3.7V)lithium batte Bracket Remote control batte : Cable tie + hand screw 12V/27A Alkaline batte Sound decibel: Remote control distance: Remote control size: 115db 0-80M 58×35×15(MM) Applicable models: Applicable to bicycles, electric bicycles, electric vehicles, motorcycles, outdoor camping equipment and personal safety protection Instruction of Remote Arming/ 3 Levels of Vibration Sensitivity Adjustment Disarming/Long Press 7s to Settings Alarming/Volume Adjustment Ringtone/5 Ringtones Options (1) Arming & Disarming Arming:Sho press the remote control [ ] lock button will sound"Do-Re-Mi", at this time the main unit has entered the arming state.3 seconds later to hear "DI", during this period touch themain unit will issue a"di-di". If you continue to touch the mainframe again, the alarm will be "biu-biu-biu"for 30 seconds. 30 seconds after touching it again, the alarm will continue. Disarming: In the arming state, sho press the remote control[ ] unlock button, the main unit will sound "mi-re-do", at this time, the main unit has been disarmed. (2) Alarm: In disarming modesho press[ ]lightning buttonthe main unit will keep alarming"biu-biu-biu".You can sho press[ ]unlock button to exit. 3) Electric Bell: In disarming mode, sho press remote [ ] bell button, the main unit will sound the previously set electric bell. Sho press sho ring, long press long ring. (4) Personalized Setting: 1. Alarm vibration sensitivity setting: Press and hold the remote control[ ] button until the remote control LED lights up again, and the alarm will have a "Bi" sound. At this time andthen press the remote control[ ] button, each time you press, the vibration sensitivity switch level. Sensitivity has 3 levels adjustable: high-medium-low. The corresponding sound is"BiBiBi(high)","BiBi(medium) ""Bi(low)", after setting, press the remote control[ ] button to exit the setting. 2. Alarm has 3 levels of volume can be set: high-medium-low. Press and hold the remote control[ ] button and do not release your hand until the remote control LED lights up again, while the alarm will have a "Bi"prompt, at this time in the remote control[ ] button, each press, switch the volume once, each switch to play the corresponding volume of"Bi"sound. When the setting is nished, press the remote control[ ] button to exit the setting. 3. Ringtone Setting: When it is not in the armed state, you can set 5 kinds of ringtones. Press and hold the remote control[ ] button until the remote control LED lights up again, while the alarm will have a"Bi"sound. At this time in the remote control[ ] button, each time you press, the bell switch once, and play the corresponding ringtone. When the setting is complete, press the remote control[ ] button to exit the setting. The ve ringtones are "horn sound1", "horn sound 2","horn sound 3","bird sound"and"di-di sound". Note: The above 3 settings can be done at once. Press and hold the remote control[ ] key and don't release your hand until the remote control LED lights up again and there will be a "Bi"sound at the same time, then you can make personalized settings for the above 1,2 and 3items, press the remote control[ ] key after the settings are completed, the settings are successful. Instruction of Remote Please use our included 2A USB charge cable, you USB can connect to your PC USB po , or by your sma phone5V/2A adaptor, or power banks. (1) 2 Hours fully charged. (2) When charging, the power indicator 1,2,3 in turn gradually increase until 3 bars are always on for a full charge. (3) When the power is low, the power indicator 3,2,1 in order to reduce to 1bar of power, please charge. (4) When charging, it is recommended to use the power bank to charge directly or the main unit screw loosened and removed before charging. Low Power: The following conditions require timely charging:1.Indicator shows I bar of power.2.The remote control distance becomes sho er.3.The remote control is not sensitive. Remote Pairing Key (1) In the state of disarming, the remote control can be paired with the main unit. Press and hold the main unit button for 3 seconds, you will hear a "di"sound, then press any button of the remote control to hear the main unit "drop", indicating successful pairing.(One main unit can connect 3 remotes.) (2) In the state of disarming, the main unit can also be disconnected from the remote control. Long press the main unit button for 7 seconds and hear a long "di". At this time, the main unit has been disconnected from the remote control. (3) In the state of disarming, Sho press the key to prompt the power. Accessories USB Charging Cord Screw Installation of Remote Control Tiesx4 Bracket Remote's Silicone Pad (1) The remote' bracket is xed with a tie in a position that is easy to touch with the left and right thumbs. (2) Place the remote (3) Press and hold the bottom snap position of the bracket to remove the remote. Installation of Bracket Placement of Main Unit (1) Choose any position on the bike where it can be xed. (2) Secure and tie down the main unit and cut o the excess tie. (3) Inse the main unit into the xing bracket and tighten the screw. (4) The main unit can be removed by loosening the screw in an anticlockwise direction. QUESTIONS & ANSWERS When you meet any questions during the operation,normally you can follow up below Q&A to solve the: (p.s.: below questions is based on the batte fully charged for main unit and remote controller, if low batte power, please charge it in time.) Long time place and not operate, please charge the batte regularly, in order to ensure the batte working life. (1) Why is the alarm not sensitive? Please do not immediately move or tough the bike after setting the alarm, after pressing the LOCK button to set the alarm, you need to wait for 5 seconds more and hear one "di"sound, it enters into the alarm mode. (2) Why not able to control the main unit by remote? In such case, rst to make sure whether the host or remote controller has enough power? Mainly causing by the batte out of power for main unit or remote controller, just charge to the main unit or change new batte for remote controller, then you can solve the problem. (3) Why can not charge the main unit ? Or why is the charging so slow? Suggest to use our included 2A USB charging cable, make sure the micro USB plug to be completely connected, if you see If you see the light on the side of the main unit ashing means it is under charging. (4) When need to be charged? How to indicate the low batte power When press the remote, if you hear 2 times of "biu biu"sound after the normal warning tone, it means the batte power is low, you need to charge it. On the other hand, the remote distance sho en, alarm sounds becomes weak, remote sensitive seems not so good, all above are the forewarning of low batte power, you had to immediately charge it. (5)How to cancel the pairing with main unit once you lost the remote? And how to pair with a new remote controller Once you lost the remote controller, in order to prevent your bike from stolen, In the Non-alarm mode, just long press to the function button for 7 seconds, when you hear a long "di"sound, the lost remote won't be able to control the main unit at all. After you purchase a new remote, longpress to the function button for 3 seconds, after you hear a sho "di"sound, just need to pressany button on remote controller, when you hear 2 times of"didi"warning tone, it was successfully paired. (6)If lost the remote controller,can I buy a new one? One host can be paired with 3 remote controllers, please contact with our after custom se ice, purchase a new remote. NOTICE: if above Q&A are not able to solve your problem, please contact our after custom se ice for any suppo . WARNING & NOTICES: (1)Please do not put the alarm close to your ears,avoid the sharp alarming hu s your hearing,keep away from the alarm at least 2 meters. (2) Do not give to kids for playing. (3) Do not put the alarm into the re. (4) If you need to put the host into water for testing, make sure the charge po to be covered rmly. (5) The nal interpretation of this manual is vested in our company. Patented product, illegal infringement is subject to prosecution.CorelDRAW 2019 iLovePDF