Lithonia Lighting HGX LED 2RH ALO 40K 120 PE WH M2

Lithonia Lighting HomeGuard 2-Light LED Outdoor Flood Light Instruction Manual

Model: HGX LED 2RH ALO 40K 120 PE WH M2

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Lithonia Lighting HomeGuard 2-Light LED Outdoor Flood Light. This energy-efficient security light is designed for outdoor residential applications such as driveways, patios, and walkways. It features adjustable lumen output, a fixed 4000K cool white color temperature, and a built-in dusk-to-dawn sensor for automatic operation.

The fixture is constructed with rugged die-cast aluminum housing and is rated IP65 for durability in various outdoor environments, including extreme temperatures from -40°C to 40°C.

Safety Information

WARNING: Risk of Electric Shock.

  • Disconnect power at the fuse or circuit breaker before installation or servicing.
  • Ensure the fixture is properly grounded.
  • Do not install with wet hands or while standing on a wet or damp surface.

WARNING: Risk of Fire.

  • Keep combustible materials away from the lamp.
  • Do not operate near flammable vapors or liquids.

Consult a qualified electrician if you are not familiar with electrical installation procedures or local electrical codes. All wiring connections must be in accordance with local and national electrical codes.

Package Contents

Verify that all components are present before beginning installation:

  • 1 x Lithonia Lighting HomeGuard 2-Light LED Outdoor Flood Light (White)
  • 1 x Crossbar
  • Installation Hardware (screws, wire nuts, gasket)

Setup and Installation

This flood light is designed for wall or eave mounting and is compatible with standard 4x4 junction boxes. Basic electrical wiring knowledge is required for installation. Always ensure power is disconnected at the circuit breaker before starting.

  1. Prepare the Mounting Surface: Ensure the junction box is securely installed and accessible.
  2. Attach the Crossbar: Secure the provided crossbar to the junction box using the supplied screws.
  3. Wire the Fixture: Connect the fixture's wires to your household wiring according to local electrical codes. Typically, this involves connecting the black wire (hot) to the black wire, the white wire (neutral) to the white wire, and the green or bare copper wire (ground) to the ground wire. Use appropriate wire nuts to secure connections.
  4. Mount the Fixture: Carefully align the fixture with the crossbar and secure it using the mounting screws. Ensure the gasket is properly seated to prevent water intrusion.
  5. Adjust Light Heads: The two round light heads are tool-less adjustable. Position them to direct light to your desired areas for optimal coverage. Integrated visors help minimize glare.
Lithonia Lighting HomeGuard 2-Light LED Outdoor Flood Light, front view
Figure 1: Front view of the Lithonia Lighting HomeGuard 2-Light LED Outdoor Flood Light. This image shows the two adjustable round light heads and the central mounting plate with controls.
Lithonia Lighting HomeGuard flood light installed on a house exterior at night
Figure 2: Example installation of the flood light on a house exterior at night, illuminating a pathway and yard.

Operating Instructions

Your HomeGuard LED Flood Light offers customizable lighting options:

  • Dusk-to-Dawn Operation: The integrated photocell sensor automatically turns the light on when ambient light levels drop (dusk) and off when light levels rise (dawn).
  • Adjustable Photocell Sensitivity: The photocell sensitivity can be adjusted to control when the light activates. This allows you to fine-tune whether the light turns on during daytime (for testing) or strictly operates as a dusk-to-dawn fixture.
  • Adjustable Lumen Output: The flood light provides two brightness levels: 1750 lumens (low) and 2750 lumens (high). The lumen output can be adjusted by rotating a dial on the fixture.
Diagram showing adjustable lumen output and dusk-to-dawn operation
Figure 3: Illustration of the adjustable lumen output feature (low/high) and the dusk-to-dawn lighting operation.

Note: This model does not feature app control. Any specification indicating app control is incorrect for this specific product.

Maintenance

The Lithonia Lighting HomeGuard LED Flood Light is designed for minimal maintenance.

  • Cleaning: Periodically clean the fixture with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
  • LED Replacement: The integrated LED lights are not user-replaceable. If the LEDs fail, the entire fixture must be replaced.

Troubleshooting

If you encounter issues with your flood light, refer to the following common solutions:

ProblemPossible CauseSolution
Light does not turn on at dusk.No power to the fixture; Photocell obstructed or set incorrectly; Ambient light too high.Check circuit breaker. Ensure photocell is not blocked. Adjust photocell sensitivity.
Light stays on during the day.Photocell obstructed; Photocell sensitivity set too low.Clear any obstructions from the photocell. Adjust photocell sensitivity to a higher setting.
Light flickers.Loose wiring connection; Power fluctuations; Faulty fixture.Ensure all wiring connections are secure (with power off). Consult an electrician for power issues. If flickering persists, the fixture may need replacement.
Light output is too dim or too bright.Lumen output setting is incorrect.Adjust the lumen output dial on the fixture to the desired brightness (1750 or 2750 lumens).

Specifications

FeatureSpecification
BrandLithonia Lighting
Model NameHomeGuard
Item Model NumberHGX LED 2RH ALO 40K 120 PE WH M2
ColorWhite
MaterialAluminum
Light Fixture FormFloodlight
Product Dimensions (L x W x H)7.56" x 4.41" x 4.25"
Item Weight1.53 pounds
Indoor/Outdoor UsageOutdoor
Power SourceCorded Electric
Installation TypeWall Mount
Special FeatureDawn-To-Dusk (Photocell Sensor)
Light Source TypeLED
Finish TypePowder Coated
Number of Light Sources2
Voltage120 Volts
Light Color4000K Cool White
Wattage25 watts
BrightnessAdjustable: 1750 Lumens (low) - 2750 Lumens (high)
Water Resistance LevelIP65 (Water Resistant)
Operating Temperature-40°C to 40°C
UPC194995254194
Diagram showing dimensions of the Lithonia Lighting HomeGuard flood light
Figure 4: Dimensional drawing of the flood light, indicating approximate measurements of 4.3 inches height, 8.5 inches width, and 3.8 inches depth.

Warranty and Support

This Lithonia Lighting HomeGuard LED Outdoor Flood Light is backed by a 5-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or further assistance, please contact Acuity Brands, the manufacturer of Lithonia Lighting products. Refer to the contact information provided with your purchase or visit the official Lithonia Lighting website.

Manufacturer: Acuity Brands

For more information, you may visit the Lithonia Lighting Store on Amazon.