Cypher.V A-04

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Cypher.V Replacement Cable Cord for Astro Gaming Headsets Instruction Manual

Model: A-04

Introduction

This manual provides instructions for the Cypher.V Replacement Auxiliary Cable, designed for use with Astro A10, A30, A40, A40TR, and A50 gaming headsets. This cable features a built-in volume control wheel and is 2 meters (6.5 feet) in length, offering a clear and stable sound transmission for an enhanced gaming experience.

The cable is compatible with various devices including Xbox-One, PS4, PC, tablets, laptops, and smartphones.

Package Contents

  • 1x Cypher.V Replacement Auxiliary Cable (Model A-04)

Setup Instructions

The Cypher.V replacement cable features two different sized 3.5mm connectors for proper connection.

  1. Identify Connectors: Locate the 5-pole 3.5mm connector and the 4-pole 3.5mm connector on the cable. The 5-pole connector typically has an extra band compared to the 4-pole connector.
  2. Connect to Headset: Insert the 5-pole 3.5mm connector into the audio input port on your Astro gaming headset (A10, A30, A40, A40TR, or A50). Ensure it is fully seated.
  3. Connect to Device: Insert the 4-pole 3.5mm connector into the audio output port of your desired device (e.g., Xbox-One controller, PS4 controller, PC, tablet, laptop, smartphone).
  4. Verify Connection: Once both ends are connected, the cable is ready for use.
Image showing the two different 3.5mm connectors, one labeled 'Input' and the other 'Output', with a volume control wheel in the middle.

Figure 1: Illustration of the cable's input (4-pole) and output (5-pole) connectors, and the tuning gear (volume control).

Diagram showing the cable connecting to various devices like PC, iOS/Android, PS4, Xbox, and 3.5mm audio equipment, with the 4-pole connector for devices and 5-pole for headsets.

Figure 2: Compatibility diagram showing the 4-pole connector for devices and the 5-pole connector for Astro A10, A30, A40, A40TR, A50 headsets.

Four images of Astro A10, A30, A40, and A50 headsets, indicating compatibility with the cable.

Figure 3: Compatible Astro Headset Models: A10, A30, A40, A50.

Operating Instructions

Volume Control

The cable features an in-line volume control wheel. To adjust the audio volume:

  • Locate the small roller wheel on the cable's in-line control module.
  • Roll the wheel upwards to increase the volume.
  • Roll the wheel downwards to decrease the volume.
Close-up of the in-line volume control wheel on the cable.

Figure 4: In-line volume control wheel for easy audio adjustment.

Maintenance and Care

To ensure the longevity and optimal performance of your Cypher.V replacement cable, follow these care guidelines:

  • Avoid Sharp Bends: Do not bend the cable sharply or tightly, especially near the connectors, as this can damage the internal wiring.
  • Proper Storage: When not in use, coil the cable loosely. Avoid tangling or knotting the cable.
  • Clean Connectors: Periodically inspect the 3.5mm connectors for dust or debris. If necessary, gently clean them with a dry, soft cloth.
  • Handle with Care: Always pull the cable by the connector housing, not by the cable itself, when disconnecting from devices or headsets.
Image showing the cable coiled neatly, emphasizing its tangle-free and durable design.

Figure 5: The cable's design promotes tangle-free use and durability.

Troubleshooting

If you encounter issues with your Cypher.V replacement cable, refer to the following common problems and solutions:

  • No Audio or Intermittent Sound:
    • Ensure both 3.5mm connectors are fully inserted into the headset and the device.
    • Verify that the 5-pole connector is in the headset and the 4-pole connector is in the device. Incorrect connection can lead to audio issues.
    • Check the volume control wheel on the cable and the device's volume settings to ensure they are not set to minimum or muted.
    • Test the cable with another compatible device or headset to determine if the issue is with the cable or the connected equipment.
  • Microphone Not Working:
    • Ensure the 4-pole connector is correctly inserted into a device that supports microphone input (e.g., a controller or PC with a combined audio/mic jack).
    • Check your device's audio settings to ensure the correct input device (microphone) is selected and not muted.
  • Poor Sound Quality (Static, Distortion):
    • Ensure connectors are clean and free of debris.
    • Avoid placing the cable near sources of electromagnetic interference.
    • Test with another cable if possible to rule out issues with the headset or device.

Specifications

BrandCypher.V
ModelA-04
Cable TypeAUX
Connector Type3.5mm Auxiliary (Male-to-Male)
Connector PolesOne 4-pole, One 5-pole
Cable Length2 Meters (6.5 Feet)
Special FeatureIn-line Volume Control, Tangle-Free Design
Compatible DevicesAstro A10/A30/A40/A40TR/A50 Headsets, PC, Xbox, PS4, Tablets, Laptops, Smartphones
MaterialNo-Oxygen Copper Core, Plastic Outer Material
ColorBlack
UPC766674014735

Warranty and Support

For warranty information or technical support regarding your Cypher.V replacement cable, please contact the manufacturer directly or the seller through the platform where the purchase was made.

Refer to your purchase documentation for specific contact details.

© 2024 Cypher.V. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.