Timex Unisex DGTL Sport Watch

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Timex Unisex DGTL Sport Watch, Model TW5M422009J. Please read this guide thoroughly to ensure proper use and to maximize the functionality of your watch.

Your Timex DGTL Sport Watch features a digital display, chronograph, daily alarm, two time zones, 24-hour military time mode, day, date, and month calendar, and Indiglo night-light. It is designed for durability and ease of use.

Setup

Initial Power-On and Battery

Your watch comes with a Lithium Metal battery pre-installed. It should be ready for immediate use. If the display is blank, the battery may need replacement. Refer to the 'Maintenance' section for battery information.

Setting Time and Date

The watch typically has four buttons: MODE, RESET, ST/STP (Start/Stop), and INDIGLO (Light). Button functions may vary slightly depending on the specific watch configuration, but generally follow this pattern:

1. Press the MODE button repeatedly until the time setting mode is displayed (often indicated by flashing digits).
2. Use the ST/STP button to advance the flashing digit (hours, minutes, seconds).
3. Use the RESET button to move to the next digit or setting (e.g., from hours to minutes, then to date, month, year).
4. Once all settings are correct, press the MODE button to exit the setting mode and return to the normal time display.

Note: Some models may require holding a button (e.g., RESET) to enter setting mode. Consult the on-screen indicators for guidance.

Strap Adjustment

The adjustable black 14mm resin strap is designed to fit wrist circumferences up to 7.5 inches. Adjust the buckle to a comfortable and secure fit on your wrist.

Operating Modes

Press the MODE button to cycle through the various functions of your watch. The typical sequence is:

• Time Display (main screen)
• Chronograph
• Daily Alarm
• Second Time Zone (T2)

Time Display

The main display shows the current time, day, date, and month. It supports both 12-hour and 24-hour (military) time formats. To switch between 12-hour and 24-hour format, typically press the ST/STP button while in time setting mode or a specific time display mode.

Chronograph (Stopwatch)

The 24-hour chronograph features 1/100-second resolution for precise timing.

1. Navigate to the Chronograph mode using the MODE button.
2. Press ST/STP to start the timer.
3. Press ST/STP again to pause/resume the timer.
4. Press RESET to clear the timer to zero.

Daily Alarm

Set a daily alarm to sound at a specific time.

1. Navigate to the Alarm mode using the MODE button.
2. Press and hold RESET (or follow on-screen instructions) to enter alarm setting mode.
3. Use ST/STP to adjust the flashing digits (hours, minutes).
4. Use RESET to move between hours and minutes.
5. Press MODE to confirm and exit alarm setting.
6. To turn the alarm on/off, press ST/STP while in Alarm mode. An alarm icon will typically appear when active.

Two Time Zones (T2)

Your watch allows you to set and view a second time zone.

1. Navigate to the T2 mode using the MODE button.
2. Press and hold RESET (or follow on-screen instructions) to enter T2 setting mode.
3. Use ST/STP to adjust the flashing digits.
4. Use RESET to move between hours and minutes.
5. Press MODE to confirm and exit T2 setting.

Indiglo Night-Light

Press the INDIGLO button (usually located on the top left or bottom right) to illuminate the watch dial for easy viewing in low-light conditions.

Water Resistance

This watch is water resistant to 50 meters (165 feet). This rating means it is generally suitable for short periods of recreational swimming. It is not suitable for diving or snorkeling. Avoid pressing buttons underwater to prevent water ingress.

Maintenance

Cleaning

Clean your watch with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, which can damage the case or strap.

Battery Replacement

The watch uses 1 Lithium Metal battery. When the display dims or stops functioning, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

Water Resistance Care

To maintain water resistance, ensure the watch case back is securely closed after any service. Avoid exposing the watch to extreme temperature changes, which can affect seals.

Troubleshooting

• Watch not displaying time or functions: Check if the battery needs replacement.
• Difficulty setting time/date: Ensure you are in the correct setting mode. Refer to the 'Setting Time and Date' section. If issues persist, try resetting the watch (some models have a small recessed button for this, or it may involve holding multiple buttons).
• Water inside the watch: Immediately take the watch to a qualified service center. Do not attempt to open it yourself.
• Buttons not responding: Ensure no debris is lodged around the buttons. If the watch has been exposed to water, allow it to dry completely.

For further assistance, please contact Timex customer support.

Specifications

Product Images

Warranty and Support

Your Timex watch is covered by a limited warranty. For specific warranty details, registration, or to find authorized service centers, please visit the official Timex website or contact their customer support directly.

For technical support or inquiries regarding your watch, please refer to the contact information provided on the Timex website or your product packaging.

Online support resources may include FAQs, digital manuals, and contact forms.