OVE Decors Misty 60 x 32 in.
Ove Decors Misty 60 x 32 in. Solid Surface Alcove Shower Wall
Model: Misty 60 x 32 in.
Product Overview
The OVE Decors Misty 60 x 32 in. Solid Surface Alcove Shower Wall is a three-piece wall set designed to enhance your bathroom space with a stylish and durable finish. This set is specifically designed for installation with an alcove shower kit and features an all-over horizontal grey tile pattern. Constructed from high-impact composite stone plastic, these panels are engineered for longevity and ease of maintenance.
Image: The complete three-piece shower wall set, showcasing the horizontal grey tile pattern.
The set includes a back wall measuring 60 inches wide and 80 inches high, and two side walls, each 32 inches wide and 80 inches high. The panels are 5mm thick and include aluminum profile edge-protectors for a clean and finished look. This product is designed to provide a durable and aesthetically pleasing shower enclosure.
Safety Information
Please read and understand all instructions before beginning installation. Failure to follow these instructions could result in personal injury or property damage.
- Always wear appropriate personal protective equipment (PPE) during installation, including safety glasses, gloves, and sturdy footwear.
- The shower wall panels are heavy. Exercise caution and use proper lifting techniques or seek assistance to prevent injury.
- Ensure the installation area is clean, dry, and well-ventilated.
- Handle panels carefully to avoid chipping or scratching the surfaces.
- Verify that all structural supports in the wall are adequate to bear the weight of the panels and any additional fixtures.
- Use only recommended adhesives and sealants as specified in the detailed installation manual to ensure proper adhesion and waterproofing.
Package Contents
Before beginning installation, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with installation and contact customer support.
- 1 x Back Shower Wall Panel (60 in. W x 80 in. H)
- 2 x Side Shower Wall Panels (32 in. W x 80 in. H each)
- 2 x Aluminum Profile Edge-Protectors
- Installation Hardware (adhesives, sealants, etc. - refer to the full installation manual for specific items)
Setup and Installation
The OVE Decors Misty shower wall set requires assembly and professional installation is recommended. For detailed, step-by-step instructions, please refer to the official Installation Manual PDF provided by OVE Decors. A general overview of the installation process is provided below:
- Preparation: Ensure the shower alcove is properly framed, plumb, and level. The surface where the panels will be installed must be clean, dry, and free of debris.
- Panel Placement: Carefully position the back panel first, ensuring it is centered and level. Apply appropriate adhesive to the back of the panel as per the adhesive manufacturer's instructions.
- Side Panel Installation: Install the two side panels, ensuring they align correctly with the back panel and the shower base. Use recommended sealants at all seams and joints to ensure a watertight installation.
- Edge Protection: Install the aluminum profile edge-protectors along the exposed edges of the panels for a finished look and added durability.
- Sealing: Apply a high-quality silicone sealant to all seams, corners, and around the base of the panels where they meet the shower pan or tub. Allow adequate curing time before using the shower.
Image: An example of the Misty shower wall installed in a bathroom setting, demonstrating its aesthetic integration.
For precise measurements, cutting instructions, and detailed adhesive application techniques, always consult the comprehensive Installation Manual PDF.
Maintenance and Care
Proper care and maintenance will ensure the longevity and appearance of your OVE Decors Misty shower walls. The high-impact composite stone plastic is designed to be scratch resistant and durable.
- Regular Cleaning: Clean the shower walls regularly with a soft cloth or sponge and a non-abrasive, mild bathroom cleaner. Avoid harsh chemicals, abrasive scrubbers, or scouring powders, as these can damage the surface finish and cause discoloration.
- Spot Cleaning: For stubborn spots, use a diluted solution of mild soap and water. Rinse thoroughly with clean water after cleaning to remove any soap residue.
- Preventing Buildup: To minimize water spots and soap scum buildup, wipe down the shower walls after each use with a squeegee or soft towel.
- Avoid Impact: While durable, avoid dropping heavy objects or striking the panels with sharp tools, which could cause damage.
Image: A detailed view of the horizontal grey tile pattern and textured finish of the shower wall panel.
Troubleshooting
This section addresses common concerns that may arise with your shower wall panels.
| Problem | Possible Cause | Solution |
|---|---|---|
| Water spots or film buildup | Hard water deposits or soap scum residue. | Clean regularly with a non-abrasive cleaner. Wipe down walls after each use to prevent buildup. |
| Discoloration or dullness | Use of abrasive cleaners or harsh chemicals. | Discontinue use of abrasive products. Clean only with mild, non-abrasive cleaners. |
| Panels not adhering properly | Improper surface preparation or insufficient adhesive. | Ensure surfaces are clean and dry before application. Refer to the installation manual for correct adhesive application and curing times. Professional re-installation may be required. |
| Leaks at seams | Inadequate sealing during installation. | Inspect all seams and joints. Reapply high-quality silicone sealant to any compromised areas. Ensure proper curing. |
Specifications
| Feature | Detail |
|---|---|
| Brand | OVE Decors |
| Model Number | Misty 60 x 32 in. |
| Installation Type | Wall |
| Shape | Rectangular |
| Item Weight | 132.3 Pounds |
| Is framed? | No |
| Number Of Panels | 3 |
| Assembly Required | Yes |
| Color | Gray |
| UPC | 828796086653 |
| Product Dimensions | 59.69 x 0.2 x 80 inches (Overall) |
| Country of Origin | China |
| Finish | Grey |
| Pattern | Solid (Horizontal Tile Detail) |
| Included Components | Shower Walls |
| Material | High-impact Composite Stone Plastic |
| Panel Thickness | 5mm |
Warranty and Support
The OVE Decors Misty 60 x 32 in. Solid Surface Alcove Shower Wall is backed by a 5-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use and service.
For warranty claims, technical assistance, or to order replacement parts, please contact OVE Decors customer support directly. Refer to the contact information provided in your purchase documentation or on the official OVE Decors website.
Additional resources:
Related documentsMisty 60 x 32 in.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.