TFA Dostmann 60.2549 Clocco Wireless Radio Alarm Clock User Manual

1. Introduction

Thank you for choosing the TFA Dostmann 60.2549 Clocco Wireless Radio Alarm Clock. This device combines a minimalist design with practical features, including a radio-controlled time display, alarm function, and temperature monitoring. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

2. Product Overview

The Clocco alarm clock features a sleek wood-look design with an invisible display that becomes visible when activated. It is designed to blend seamlessly into various interior styles.

Key Features:

• Wood-look design with invisible display.
• Luminous digits with 3 adjustable brightness levels.
• Display activation by sound or touch (when battery-powered).
• Display of time, date, or indoor temperature.
• Automatic display change function.
• Alarm function.
• Radio-controlled time via DCF 77 signal for precise timekeeping.
• Automatic dimming function (19:00 - 06:59).

This image displays the TFA Dostmann Clocco Radio Alarm Clock, featuring a sleek black wood-look casing. The digital display clearly shows the time '10:24' in white LED digits. Three AA alkaline batteries are shown alongside the clock, indicating its battery-powered operation.

3. Setup

3.1 Battery Installation

1. Open the battery compartment cover located on the back of the device.
2. Insert 3 x 1.5V AA alkaline batteries, ensuring correct polarity (+/-). Three high-quality AA batteries are included.
3. Close the battery compartment cover.
4. A 3V CR 2032 button cell battery is also included, typically pre-installed, for memory backup.

Note: When operating solely on batteries, the display remains invisible and activates briefly via sound or touch to conserve power.

3.2 Power Adapter Connection

For continuous display illumination, connect the supplied power adapter to the designated port on the alarm clock and plug it into a power outlet. When using the adapter, the digits will remain illuminated permanently and can be adjusted for brightness.

3.3 Initial Setup and DCF 77 Signal Reception

After power-up (either with batteries or power adapter), the alarm clock will automatically attempt to receive the DCF 77 radio signal. This signal ensures the time is always accurate to the second and automatically adjusts for daylight saving time changes.

• Place the device in an area with good radio reception, away from electronic interference.
• The initial reception process may take several minutes.
• If reception is unsuccessful, the time can be set manually (refer to Section 4.4). The clock will continue to attempt signal reception periodically.

4. Operating Instructions

4.1 Display Modes

The clock can display time, date, or indoor temperature. Use the designated button (refer to device markings) to cycle through these display modes. An automatic display change function can also be activated, which cycles through time, date, and temperature at regular intervals.

4.2 Brightness Adjustment

When powered by the adapter, the display brightness can be adjusted to three levels. Use the appropriate button (e.g., 'UP' or 'DOWN' button) to select your preferred brightness. This setting is not applicable when operating solely on batteries.

4.3 Alarm Function

To set the alarm:

1. Press the 'ALARM' button to enter alarm setting mode.
2. Use the 'UP' and 'DOWN' buttons to adjust the hour and minute.
3. Press 'ALARM' again to confirm and activate the alarm. An alarm icon will appear on the display.

To deactivate the alarm, press the 'ALARM' button again until the alarm icon disappears. When the alarm sounds, press any button to activate the snooze function, or press the 'ALARM' button to turn it off completely.

4.4 Manual Time Setting

If the DCF 77 signal is not received or if you prefer to set the time manually:

1. Press and hold the 'SET' or 'MODE' button (refer to device markings) to enter manual time setting mode.
2. Use the 'UP' and 'DOWN' buttons to adjust the hour, minute, year, month, and day.
3. Press 'SET' or 'MODE' to confirm each setting and move to the next.
4. Exit setting mode by pressing 'SET' or 'MODE' after the last setting, or wait for automatic exit.

4.5 Automatic Dimming Function

The clock features an automatic dimming function. Between 7:00 PM (19:00) and 6:59 AM (06:59), the display illumination will automatically switch to the lowest brightness level. This ensures that your sleep is not disturbed while the time remains readable.

4.6 Display Activation (Battery Mode)

When operating on batteries, the display is normally off to conserve power. It can be activated briefly by making a sound (e.g., clapping) or by gently tapping the device. The display will illuminate for a few seconds before turning off again.

5. Maintenance

To maintain your TFA Dostmann Clocco alarm clock:

• Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
• If the device will not be used for an extended period, remove the batteries to prevent leakage.

6. Troubleshooting

7. Specifications

• Model: 60.2549
• Brand: TFA Dostmann
• Color: Black
• Material: Wood (imitation)
• Display Type: Digital
• Power Source: 3 x 1.5V AA batteries (included), 1 x 3V CR 2032 battery (included for memory backup), or AC power adapter (supplied).
• Dimensions: Approximately 100 x 41 x 70 mm (Length x Width x Height)
• Weight: Approximately 420 g
• Special Features: Alarm, Large Display, Radio-controlled time (DCF 77), Automatic dimming, Sound/Touch activated display.
• Indoor/Outdoor Use: Indoor

8. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.