1. Introduction
This manual provides comprehensive instructions for the Okin Dewert 72896 IPROXX2 Handset Remote Control. It covers product overview, setup, operation, maintenance, troubleshooting, and specifications. Please read this manual carefully before using the device to ensure proper function and safety.
2. Product Overview
The Okin Dewert 72896 IPROXX2 Handset is designed for controlling adjustable hospital and care beds. It features an ergonomic design with eight functional buttons and a 13-pin connection plug.
This image displays the complete Okin Dewert 72896 IPROXX2 Handset Remote Control. It shows the gray remote with eight bed adjustment buttons and a 'Power On' indicator, connected to a coiled cable that leads to a 13-pin circular connector.
Key Features
- 8 functional buttons for bed adjustments.
- Power On indicator light.
- 13-pin connection plug.
- IPX6 protection degree.
- Ergonomic design.
3. Compatibility
This remote control is compatible with the following Okin control boxes:
- MC 11 series
- MC 12 series
- MC 15 series
- MC 16 series
- MC 17 series
- MC 18 series
Always verify your control box brand and model before connecting the handset.
4. Setup
- Identify the Control Box: Locate the control box on your adjustable bed. Ensure it is an Okin control box from the compatible series (MC 11, 12, 15, 16, 17, 18).
- Locate the Connection Port: Find the 13-pin connection port on the control box. This port is typically circular.
- Connect the Handset: Align the 13-pin connector of the IPROXX2 handset with the port on the control box. Gently push the connector in until it is securely seated. Do not force the connection.
- Power On: Once connected, ensure the bed's power supply is active. The 'Power On' indicator on the handset should illuminate.
This image provides a detailed view of the 13-pin circular connector, which is used to connect the handset to the adjustable bed's control box. The pins are clearly visible, indicating the connection points.
5. Operating Instructions
The IPROXX2 handset allows for precise adjustment of your adjustable bed. The buttons are intuitively designed for ease of use.
This image shows the face of the Okin Dewert IPROXX2 remote control. It features eight buttons with graphical representations of bed sections (head, foot, and full bed) moving up or down, along with a 'Power On' light at the bottom.
Button Functions
| Button Icon | Function |
|---|---|
| Head Up | Raises the head section of the bed. |
| Head Down | Lowers the head section of the bed. |
| Foot Up | Raises the foot section of the bed. |
| Foot Down | Lowers the foot section of the bed. |
| Full Bed Up | Raises both head and foot sections simultaneously. |
| Full Bed Down | Lowers both head and foot sections simultaneously. |
| Legs Up | Raises the leg section of the bed. |
| Legs Down | Lowers the leg section of the bed. |
Press and hold the desired button to move the corresponding bed section. Release the button to stop movement.
6. Maintenance
- Cleaning: Wipe the handset with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the handset is dry before use.
- Storage: Store the handset in a dry place, away from direct sunlight and extreme temperatures.
- Cable Care: Avoid kinking or stretching the coiled cable excessively. Inspect the cable and connector periodically for any signs of damage.
- Protection: The IPROXX2 handset has an IPX6 protection degree, meaning it is protected against powerful water jets. However, it is not designed for submersion.
7. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Handset not responding | Check if the 13-pin connector is securely plugged into the control box. Ensure the bed's power supply is active. Verify compatibility with your control box model. |
| 'Power On' indicator is off | Confirm the bed is plugged into a working power outlet. Check the connection to the control box. |
| Bed section not moving | Ensure no obstructions are preventing movement. Check for any error codes on the control box (if applicable). |
If issues persist after troubleshooting, contact a qualified service technician or Okin customer support.
8. Specifications
- Model Name: IPROXX 2
- Article Number: 72869
- Input Voltage: U in: 24 - 29V
- Serial Number: Q120337 0092
- Protection Degree: IPX6
- Item Weight: 9.9 ounces
- Product Dimensions: 7 x 9 x 3 inches
- Connection Type: 13-pin circular connector
- Control: 2 actuators/motors
This image shows a detailed view of the product label attached to the handset's cable. It clearly displays 'IPROXX 2', the article number '72869', input voltage 'U in: 24-29V', and a CE mark.
This image shows another label on the cable, indicating 'IPX6' protection, the 'DEWERT A Phoenix Mecano Brand' logo, and a note to contact www.dewertokin.de/patents for patent information.
9. Warranty and Support
For warranty information or technical support, please refer to the official Okin website or contact your authorized dealer. Ensure you have your product model number (D.72869) and serial number (Q120337 0092) available when seeking support.
You can visit the official Okin store on Amazon for more products and information: Okin Store.