Introduction
This manual provides essential information for the safe and efficient use of your Aigostar LED PLC G24d-3 15W bulbs. Please read these instructions carefully before installation and retain them for future reference.
Safety Instructions
- Power Off: Always ensure the power supply is switched off at the mains before installing, removing, or cleaning the bulb.
- Correct Base: Use only in fixtures designed for G24d-3 bi-pin bases. Incorrect base types can cause damage or electrical hazards.
- Non-Dimmable: This bulb is non-dimmable. Do not use with dimmer switches, as this may damage the bulb and void the warranty.
- Indoor Use Only: Designed for indoor applications. Do not expose to moisture or outdoor elements.
- Ventilation: Ensure adequate ventilation around the bulb to prevent overheating.
- Disposal: Dispose of LED bulbs according to local regulations. Do not dispose of with general household waste.
- Children: Keep out of reach of children.
Product Overview
The Aigostar LED PLC G24d-3 15W bulb is an energy-efficient lighting solution designed for various indoor applications. It features a long lifespan and provides neutral white light (4000K) with high color rendering.
Image: Key parameters of the Aigostar LED PLC G24d-3 15W bulb, including 15W wattage, 101W incandescent equivalent, 1540 lumens brightness, non-dimmable feature, neutral white 4000K color temperature, and G24d-3 base type. Dimensions are shown as 3.4cm width and 17cm height.
- Long Lifespan: Semiconductor light-emitting chip design ensures a long operational life of up to 15,000 hours, reducing the frequency of replacements.
- Energy Efficient: Consumes significantly less electricity compared to traditional bulbs, contributing to energy savings.
- Easy Installation: Standard G24d-3 base allows for instant, flicker-free, and hum-free illumination.
- Wide Application: High-quality glass with a 360° beam angle, suitable for downlights, table lamps, and various commercial, industrial, and home lighting environments.
- High Performance: Features a Color Rendering Index (CRI) of >80 for accurate color perception, short-circuit protection, high-temperature protection, and durable heat-resistant PC material.
Image: Examples of the Aigostar LED PLC G24d-3 15W bulb's application in various settings, including industrial, commercial, and home lighting, demonstrating its 360-degree light distribution.
Setup (Installation)
- Turn Off Power: Before starting, ensure the electrical power to the fixture is completely turned off at the circuit breaker or fuse box.
- Remove Old Bulb: Carefully remove the existing bulb from the fixture. Allow it to cool if it was recently in use.
- Insert New Bulb: Align the G24d-3 bi-pin base of the Aigostar LED bulb with the socket in the fixture. Gently push and twist until the bulb is securely seated. Do not force the bulb into the socket.
- Restore Power: Once the bulb is securely installed, restore power to the fixture at the circuit breaker.
- Test: Turn on the light switch to confirm proper operation.
Operating
The Aigostar LED PLC G24d-3 15W bulb operates as a standard light source. Simply use the wall switch or fixture switch to turn the light on or off. This bulb is non-dimmable and should not be used with dimmer switches.
Image: Comparison illustrating the flicker-free operation of Aigostar LED bulbs versus the frequent flicker of ordinary bulbs, highlighting eye protection benefits.
Image: Illustration of the Color Rendering Index (CRI) of the Aigostar LED bulb, showing CRI > 80, which provides colors close to natural sunlight for enhanced visual accuracy.
Maintenance
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: Due to the long lifespan of LED bulbs, frequent replacement is not expected. When replacement is necessary, follow the installation steps outlined in the "Setup" section.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. |
|
|
| Bulb flickers or hums. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Aigostar |
| Model Name | Aigostar PLC 2U 15W G24 Neutralweiß |
| ASIN | B097RC3X8M |
| Bulb Type | LED |
| Bulb Shape | PLC 2U |
| Base Type | G24d-3 bi-pin |
| Wattage | 15 Watts |
| Incandescent Equivalent | 101 Watts |
| Luminous Flux | 1540 Lumens |
| Color Temperature | 4000 Kelvin (Neutral White) |
| Color Rendering Index (CRI) | >80 |
| Voltage | 220-240 Volts, 50 Hertz |
| Dimmable | No (Non-Dimmable) |
| Lifespan | Up to 15,000 hours |
| Material | Plastic, Glass |
| Dimensions (L x W x H) | 3.4 x 3.4 x 17 cm (approx. per bulb) |
| Energy Efficiency Class | F (New EU standard, equivalent to old A+) |
| Indoor/Outdoor Use | Indoor |
| Country of Origin | China |
Image: The EU Energy Label for the Aigostar PLC 2U 15W G24d-3 LED bulb, showing an energy efficiency class of F under the new 2019/2015 regulations. Click the image to view the product on the EPREL database.
Warranty and Support
Aigostar products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or customer service, please refer to the contact details provided on the product packaging or visit the official Aigostar website. Please retain your proof of purchase for warranty claims.