PERFASCIN H96 Max Replacement Remote Control User Manual

Introduction

This manual provides instructions for the PERFASCIN H96 Max Replacement Remote Control. This remote is designed to work with various Android TV Box models, including H96 Max RK3318, H96 Mini H6, Allwinne Android Box, H96 Mini Max X2 X3 Max+, and X88 Pro S Android TV Box. Please read this manual carefully to ensure proper use and maintenance of your remote control.

Setup

1. Battery Installation

The remote control requires two AAA batteries (not included) for operation. Follow these steps to install the batteries:

1. Locate the battery compartment on the back of the remote control.
2. Press down on the latch and slide the battery cover downwards to open it.
3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Slide the battery cover back into place until it clicks securely.

Figure 1: Battery compartment with cover removed.

2. Initial Use

This replacement remote control is designed to work out-of-the-box with compatible H96 Max and other specified Android TV Box models. No complex pairing or programming is typically required. Once batteries are installed, point the remote towards your Android TV Box and begin operation.

Operating Instructions

Familiarize yourself with the buttons on your PERFASCIN H96 Max remote control:

Figure 2: Front view of the remote control with key buttons.

• Power Button (ⓘ): Turns the Android TV Box on or off.
• Navigation Pad (Up, Down, Left, Right): Used to navigate menus and select items on the screen.
• OK Button: Confirms selections or opens items.
• Back Button (↵): Returns to the previous screen or menu.
• Home Button (⌂): Returns to the main home screen of the Android TV Box.
• Menu Button (☰): Opens context-sensitive menus or options.
• Volume Up/Down Buttons (🔊 / 🔈): Adjusts the volume level.
• Mouse/Cursor Button (💸): Activates or deactivates the on-screen mouse cursor function (if supported by your TV Box).

Maintenance

Cleaning the Remote Control

To maintain the remote control's appearance and functionality:

• Wipe the surface with a soft, dry cloth.
• Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the finish or internal components.

Battery Replacement

Replace batteries when the remote control becomes unresponsive or its range decreases significantly. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries or different types of batteries.

Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.

Troubleshooting

• Remote Control Not Responding:
  • Ensure batteries are installed correctly with the correct polarity.
  • Replace old batteries with new AAA alkaline batteries.
  • Ensure there are no obstructions between the remote control and the Android TV Box's infrared receiver.
  • Verify that the remote control is pointed directly at the TV Box.
• Specific Buttons Not Working:
  • Check for any physical damage or debris under the button.
  • If only certain functions are not working, ensure your Android TV Box model fully supports all functions of this replacement remote.
• Short Operating Range:
  • Replace batteries with new ones.
  • Ensure the remote's infrared emitter and the TV Box's receiver are clean and unobstructed.

Specifications

Support

For any inquiries or assistance regarding your PERFASCIN H96 Max Replacement Remote Control, please contact the seller directly. They will be able to provide further support and guidance.