1. Introduction
The ANCEL HD001 Printer is an exclusive accessory designed to complement your ANCEL HD series heavy-duty truck diagnostic scanner. This thermal printer enables users to quickly print diagnostic reports directly from their scanner, facilitating record-keeping and client communication.
Compatibility: This printer is specifically designed for use with ANCEL HD3100, HD3100 PRO, HD3200, HD3300, HD3400, HD3500, and HD3600 diagnostic tools.
Figure 1.1: The ANCEL HD001 Printer in operation, displaying a printed diagnostic report.
Figure 1.2: Visual representation of the ANCEL HD001 Printer's compatibility with ANCEL HD3100, HD3100 Pro, HD3200, HD3300, and HD3400 diagnostic scanners.
2. Product Overview
Familiarize yourself with the key components of the ANCEL HD001 Printer.
Figure 2.1: Labeled components of the ANCEL HD001 Printer. Key features include the paper outlet, test key/paper feed button, separation switch for host and printer, paper bin cover, and the print function.
- Paper Outlet: Where the printed paper exits the device.
- Test Key: Functions as a printer self-test button and a paper feed button.
- Separation Switch: Used to detach the printer unit from the main diagnostic scanner unit.
- Paper Bin Cover: Opens to allow for loading and changing of printing paper.
- Print: The primary function to generate diagnostic reports and results.
3. Setup
3.1 Combining and Separating the Printer Unit
The ANCEL HD001 printer is designed for easy attachment and detachment from compatible ANCEL HD series diagnostic scanners.
- To combine: Align the printer unit with the scanner unit and slide them together until they securely click into place.
- To separate: Locate the separation switch (refer to Figure 2.1) and activate it, then gently slide the units apart.
Figure 3.1: Illustrated steps for combining and separating the printer unit from the diagnostic scanner.
Figure 3.2: Demonstrates the straightforward process of attaching and detaching the printer from the main diagnostic device.
3.2 Loading and Changing Printing Paper
The printer uses 80mm thermal paper. Ensure correct paper orientation for proper printing.
- Open the paper bin cover.
- Place the thermal printing paper into the paper bin. Pay close attention to the direction of the paper feed. If installed incorrectly, the printout will be blank.
- Close the paper bin cover securely.
Figure 3.3: Step-by-step guide for loading and replacing the thermal paper roll.
4. Operating Instructions
4.1 Printing Diagnostic Reports
After completing a diagnostic scan with your ANCEL HD series tool, you can print the results directly using the HD001 printer.
- Ensure the HD001 printer is properly attached to your ANCEL HD diagnostic scanner and has paper loaded.
- On your ANCEL HD scanner, navigate to the option to print the diagnostic report. This is typically a 'Print' button or menu option displayed after a scan is complete.
- Confirm the print command. The printer will then generate a physical copy of the diagnostic data.
The printer utilizes real-time thermal printing technology, providing quick and clear printouts at a speed of up to 60 mm/s.
Figure 4.1: The ANCEL HD001 Printer with a roll of thermal paper, indicating standard dimensions of 3.1 inches by 1.1 inches.
5. Maintenance
5.1 Paper Replacement
Regularly check the paper supply. When the paper roll is depleted, replace it following the steps outlined in Section 3.2, "Loading and Changing Printing Paper." Use thermal paper rolls with dimensions of approximately 3.1 inches by 1.1 inches (80mm width).
5.2 Cleaning
To maintain optimal performance, periodically clean the printer's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents. Ensure no dust or debris accumulates in the paper path or around the print head.
6. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Printer does not print or prints blank pages. |
|
|
| Poor print quality. |
|
|
| Printer not recognized by scanner. |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Model | HD001 |
| Printing Method | Thermo-sensitive (Thermal Printer) |
| Resolution | 203 dpi |
| Max Printing Speed | 60 mm/s |
| Effective Print Width | 72 mm |
| Printer Dimensions (L x W x H) | 4.9 inches x 1.96 inches x 4.7 inches (approximately) |
| Item Weight | 10.2 ounces |
| Compatible Scanners | ANCEL HD3100, HD3100 PRO, HD3200, HD3300, HD3400, HD3500, HD3600 |
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your ANCEL HD series diagnostic scanner or visit the official ANCEL website. Contact information for customer support is typically available on the product packaging or within the main scanner's user interface.