Bellemave Twin Over Twin House Bunk Bed with Slide and Stairway, Model 29E

Important Safety Instructions

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Maximum Weight Capacity: Do not load more than 175 pounds on either the upper or lower bunk.
• Assembly: Follow assembly instructions carefully to prevent instability. Ensure all connections are securely fastened before use.
• Age Recommendation: The upper bunk is not recommended for children under 6 years of age.
• Guardrails: Always use the guardrails on the upper bunk. Ensure they are properly installed and maintained.
• Mattress Size: Use only mattresses that are 74-75 inches long and 37.5-38.5 inches wide for both bunks. The maximum mattress thickness for the upper bunk should not exceed 6 inches to ensure proper guardrail height.
• Prohibited Items: Do not attach or hang items to any part of the bunk bed that are not designed for use with the bed, for example, but not limited to, hooks, belts, or jump ropes.
• Play: Prohibit horseplay on or under the bed. Prohibit more than one person on the upper bunk.
• Ventilation: Ensure adequate ventilation around the bed.
• Regular Checks: Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage, and that all connectors are tight.
• Slide Safety: Ensure the slide is securely attached. Only one child should use the slide at a time. Supervise children during slide use.

Package Contents

Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list in your packaging for specific component identification.

• Wooden Bed Frames (Headboards, Footboards, Side Rails)
• Bed Slats
• Stairway Unit with Storage Drawers
• Slide Component
• Guardrails
• Ladder
• Hardware Pack (Screws, bolts, nuts, washers, Allen wrench)
• Assembly Instructions Booklet

Assembly Instructions

Assembly typically requires two adults. Please read all instructions carefully before proceeding. Keep children and pets away during assembly.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Compare each part to the parts list provided in your separate assembly guide to ensure everything is accounted for.
2. Assemble Lower Bunk Frame: Begin by connecting the headboard and footboard of the lower bunk to the side rails using the provided hardware. Do not fully tighten bolts until the entire frame is assembled.
3. Assemble Upper Bunk Frame: Similarly, assemble the headboard, footboard, and side rails for the upper bunk.
4. Attach Stairway Unit: Securely attach the stairway unit to the designated side of the lower bunk frame. Install the storage drawers into the stairway unit as per the specific instructions.
5. Install Support Beams: Attach the vertical support beams that connect the lower and upper bunk frames. Carefully lift and position the upper bunk frame onto these supports.
6. Install Guardrails and Ladder: Securely attach all guardrails to the upper bunk. Install the ladder to provide access to the upper bunk.
7. Attach Slide: Connect the slide to the designated opening on the upper bunk, ensuring it is firmly secured to prevent movement during use.
8. Install Bed Slats: Place and secure the bed slats for both the upper and lower bunks. Ensure they are evenly spaced and firmly attached to support the mattresses.
9. Final Tightening: Once all components are in place and aligned, systematically tighten all bolts and screws. Do not overtighten.

Figure 1: Fully assembled Bellemave Twin Over Twin House Bunk Bed with Slide and Stairway. This image provides an overall view of the product.

Figure 2: Side view of the bunk bed, highlighting the integrated stairway with storage drawers.

Figure 3: Close-up view of the slide, showing its attachment point and surface. Ensure the slide is securely fastened.

Operating Instructions

This bunk bed is designed for safe and comfortable use by children, incorporating a slide and stairway with storage.

• Using the Bunks: The lower bunk is easily accessible. To access the upper bunk, use the integrated stairway. Always ascend and descend facing the stairs, holding onto the handrails.
• Using the Slide: The slide provides an alternative method for descending from the upper bunk. Ensure the area around the slide is clear before use. Only one child should use the slide at a time, and adult supervision is recommended.
• Storage Drawers: The stairway unit includes integrated drawers for convenient storage of toys, clothes, or bedding. Ensure drawers are fully closed when not in use to prevent tripping hazards.

Maintenance

Regular maintenance will ensure the longevity and safety of your bunk bed.

• Cleaning: Wipe down the bed frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Hardware Check: Periodically (e.g., every 3 months) check all bolts, screws, and connections to ensure they remain tight. Retighten as necessary to maintain structural integrity.
• Structural Integrity: Inspect the wooden components for any signs of cracks, splinters, or damage. If any damage is found, discontinue use and contact customer support for replacement parts or advice.
• Mattress Support: Ensure bed slats are in good condition and properly secured. Replace any broken or damaged slats immediately.

Troubleshooting

If you encounter any issues with your bunk bed, refer to the following common problems and solutions:

• Bed feels wobbly or unstable:
  • Check all bolts and screws. Tighten any loose connections.
  • Ensure the bed is placed on a flat, level surface.
  • Verify that all parts were assembled correctly according to the instructions.
• Squeaking noises:
  • Tighten all hardware.
  • Ensure bed slats are properly seated and secured.
• Drawers not sliding smoothly:
  • Check for any obstructions in the drawer glides.
  • Ensure the drawers were assembled correctly and are aligned within their tracks.
• Missing or damaged parts:
  • Review the package contents list. If parts are missing or damaged upon arrival, contact Bellemave customer support immediately for assistance.

Specifications

Figure 4: Detailed dimension diagram of the Bellemave Twin Over Twin House Bunk Bed. All measurements are in inches.

Warranty and Support

For any questions regarding assembly, missing parts, or product defects, please contact Bellemave customer support. Keep your purchase receipt and model number (29E) handy for faster service.

Contact information can typically be found on the packaging or the Bellemave official website.