Pyle PPHP42B Wireless Portable Bluetooth Boombox Speaker

Introduction

Thank you for purchasing the Pyle PPHP42B Wireless Portable Bluetooth Boombox Speaker. This manual provides important information regarding the setup, operation, and maintenance of your device. Please read it thoroughly to ensure proper use and to maximize your listening experience.

What's in the Box

Image: The Pyle PPHP42B speaker, a remote control, a USB charging cable, and a carrying strap, laid out next to the product packaging.

• Pyle PPHP42B Speaker System
• Remote Control
• USB Charging Cable (Note: A 5V power adapter is not included and is required for charging)
• Carrying Strap

Product Features

• True Wireless Stereo (TWS) System
• High-Powered Speaker System with 120 Watts Max Output
• Bluetooth Wireless Music Streaming (Version 5.0, Network Name: 'PYLEUSA', Range: Up to 32+ ft.)
• Multi-Color Flashing Full Panel LED Lights
• FM Radio with Digital LED Display
• Built-in Rechargeable Li-ion Battery (1800mAh, 3.7V)
• Aux (3.5mm) Input
• MP3 Digital Audio File Support
• USB Flash Drive Memory Reader (Up to 32GB)
• Micro SD Card Reader
• 1/4'' Input Jacks for Microphone
• Ported Enclosure for Extended Bass Response
• Integrated Extending Carry Handle and Convenient Carrying Strap

Controls and Connections

Image: Close-up of the speaker's top panel, showing buttons and input ports.

The PPHP42B features an intuitive top control panel and various input/output ports for versatile connectivity.

• Power Switch: Turns the unit on or off.
• Mode Button: Cycles through input modes (Bluetooth, FM Radio, AUX, USB, Micro SD).
• Play/Pause Button: Controls playback in Bluetooth, USB, and Micro SD modes.
• Previous/Next Buttons: Navigates tracks or FM radio stations.
• Volume Control: Adjusts the master volume.
• USB Port: For USB flash drive playback.
• Micro SD Card Slot: For Micro SD card playback.
• AUX Input (3.5mm): Connect external audio devices.
• Microphone Input (1/4''): Connect a microphone for karaoke or public address.
• Charging Port: Connect the USB charging cable.

A remote control is also included for convenient operation from a distance.

Setup

1. Charging the Speaker

1. Locate the USB charging cable provided in the box.
2. Connect the USB charging cable to the speaker's charging port.
3. Connect the other end of the USB cable to a 5V USB power adapter (not included) or a compatible USB power source.
4. The LED indicator will show the charging status. Allow sufficient time for a full charge before first use.

2. Powering On/Off

• To power on the speaker, slide the Power Switch to the "ON" position.
• To power off the speaker, slide the Power Switch to the "OFF" position.

Operating Instructions

1. Bluetooth Pairing

1. Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by an audible prompt and flashing LED lights.
2. On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select "PYLEUSA" from the list of devices.
4. Once paired, the speaker will confirm with an audible prompt, and the LED lights may change their pattern.
5. You can now stream audio wirelessly from your device to the speaker.

2. FM Radio Operation

1. Press the "Mode" button repeatedly until "FM" is displayed on the digital LED display.
2. Press and hold the "Play/Pause" button to initiate an automatic scan for FM stations. The speaker will save all found stations.
3. Use the "Previous" and "Next" buttons to navigate between saved FM stations.

3. USB/Micro SD Playback

1. Insert a USB flash drive or Micro SD card (with MP3/WMA audio files) into the corresponding port/slot.
2. The speaker should automatically switch to USB or Micro SD mode and begin playback. If not, press the "Mode" button to select the correct input.
3. Use the "Play/Pause", "Previous", and "Next" buttons to control playback.

4. AUX Input

1. Connect an external audio device (e.g., MP3 player, laptop) to the speaker's 3.5mm AUX input using an audio cable (not included).
2. Press the "Mode" button until "AUX" is displayed.
3. Audio will now play through the speaker from your connected device. Control playback from the external device.

5. Microphone Input

1. Connect a 1/4'' microphone to the microphone input jack.
2. Adjust the microphone volume using the speaker's master volume control.

6. LED Lights Control

Image: The speaker showcasing its dynamic multi-color LED lights, creating a party ambiance.

The speaker features multi-color flashing LED lights. Refer to the remote control for specific buttons to change light modes or turn them off. Note that the lights may activate automatically upon power-on.

7. True Wireless Stereo (TWS) Function

The TWS function allows you to connect two PPHP42B speakers wirelessly for a stereo sound experience. (Specific TWS pairing instructions are not detailed in the provided product description. Please refer to the full user manual PDF for detailed steps if available, or experiment by powering on both units and holding the 'Mode' button on one until they pair.)

Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use harsh chemicals or abrasive cleaners.
• Storage: When not in use for extended periods, store the speaker in a cool, dry place.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the unit regularly, even if not in use. Turn off the power with the ON/OFF switch when not in use to prevent battery damage from standby mode.
• Water Exposure: This speaker is not waterproof. Avoid exposure to water or excessive moisture.

Troubleshooting

Specifications

Warranty and Support

This product comes with a manufacturer's warranty. For specific warranty details and support inquiries, please refer to the official Pyle website or contact Pyle customer service directly. You can also visit the Pyle Store on Amazon for additional information and resources.

For a downloadable PDF version of the user manual, please refer to the product page or the manufacturer's support section.