1. Introduction
Thank you for choosing the TOTAL TDLI12325 12V Lithium-Ion Cordless Drill. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read these instructions carefully before use and keep them for future reference.
Image 1.1: The TOTAL TDLI12325 12V Lithium-Ion Cordless Drill, showing the drill unit, two 1.5Ah batteries, and a hard carrying case.
2. Safety Instructions
Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.
- Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Electrical Safety: Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions.
- Personal Safety: Always wear eye protection. Use hearing protection when operating for extended periods. Dress properly; avoid loose clothing or jewelry. Secure long hair.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Battery Pack Use and Care: Recharge only with the charger specified by the manufacturer. Do not use battery packs with any other power tools.
3. Package Contents
Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your retailer.
- 1 x TOTAL TDLI12325 Cordless Drill
- 2 x 12V 1.5Ah Lithium-Ion Battery Packs
- 1 x Battery Charger (220-240V ~ 50/60Hz)
- 1 x Carrying Case
- 1 x Drill Attachment (as included component)
Image 3.1: The TOTAL TDLI12325 Cordless Drill and its components, including batteries and charger, stored within the durable carrying case.
4. Product Overview
Familiarize yourself with the main parts of your cordless drill before operation.
- Keyless Chuck: For quick and easy bit changes.
- Torque Adjustment Ring: Selects the desired torque setting for driving screws or drill mode.
- Speed Selector Switch: Allows selection between two speed ranges (High/Low).
- Forward/Reverse Switch: Changes the rotation direction of the chuck.
- Trigger Switch: Activates the drill and controls variable speed.
- LED Work Light: Illuminates the work area.
- Battery Pack: Provides power to the drill.
- Battery Release Buttons: For removing the battery pack.
Image 4.1: A side view of the TOTAL TDLI12325 Cordless Drill, highlighting its compact design and ergonomic grip.
5. Setup
5.1. Charging the Battery
Your drill is powered by 12V Lithium-Ion batteries. Ensure batteries are fully charged before first use.
- Connect the charger to a standard 220-240V ~ 50/60Hz power outlet.
- Slide the battery pack onto the charger until it clicks into place.
- The charging indicator light on the charger will show the charging status. Refer to the charger manual for specific light indications.
- Once fully charged, disconnect the battery from the charger and unplug the charger from the power outlet.
5.2. Installing/Removing the Battery Pack
- To Install: Align the battery pack with the base of the drill handle and slide it in until it locks securely.
- To Remove: Press the battery release buttons on the sides of the battery pack and slide the battery out.
5.3. Installing/Removing Drill Bits
- To Install: Rotate the keyless chuck counter-clockwise to open the jaws. Insert the drill bit fully into the chuck. Rotate the chuck clockwise to tighten the jaws securely around the bit.
- To Remove: Rotate the keyless chuck counter-clockwise to loosen the jaws and pull the bit out.
Image 5.1: A detailed view of the drill's chuck and torque adjustment ring, showing the numbered settings and the forward/reverse switch.
6. Operating Instructions
6.1. Powering On/Off and Variable Speed
Press the trigger switch to turn the drill on. The speed is variable; the harder you press the trigger, the faster the drill rotates. Release the trigger to turn the drill off.
6.2. Forward/Reverse Rotation
The forward/reverse switch is located above the trigger. Push it to the left for forward rotation (drilling/tightening) and to the right for reverse rotation (removing screws/loosening). Ensure the switch is in the center position to lock the trigger and prevent accidental starting.
6.3. Torque Adjustment
The torque adjustment ring allows you to select the appropriate torque setting for your task. Lower settings are for driving small screws or working with soft materials, while higher settings are for larger screws or harder materials. The drill symbol setting is for drilling applications, providing maximum torque.
6.4. Speed Selection
Use the speed selector switch on top of the drill to choose between two speed ranges:
- Low Speed (1): For driving screws and drilling larger holes.
- High Speed (2): For drilling smaller holes and faster operation.
7. Maintenance
Regular maintenance ensures optimal performance and extends the life of your tool.
- Cleaning: Keep the ventilation slots clean to prevent overheating. Use a soft, damp cloth to clean the tool casing. Do not use harsh chemicals or abrasive cleaners.
- Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods. Recharge them periodically if not in use.
- Storage: Store the drill and its accessories in the provided carrying case in a dry, secure location, out of reach of children.
- Inspection: Regularly check the power cord of the charger for damage. Inspect the chuck for wear and ensure it tightens properly.
8. Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Drill does not start | Battery not charged; Battery not properly installed; Forward/Reverse switch in center (locked) position | Charge battery; Reinstall battery; Move switch to forward or reverse position |
| Loss of power during operation | Battery low; Overload | Recharge battery; Reduce pressure on tool or use a lower speed/higher torque setting |
| Battery not charging | Charger not plugged in; Faulty battery/charger | Check power connection; Contact customer support for replacement |
| Bit slips in chuck | Chuck not tightened sufficiently; Bit shank is dirty or damaged | Tighten chuck firmly; Clean or replace bit |
9. Specifications
Technical data for the TOTAL TDLI12325 Cordless Drill.
| Feature | Specification |
|---|---|
| Model Number | TDLI12325-8 |
| Voltage | 12 V |
| Battery Type | Lithium-Ion |
| Battery Capacity | 1.5 Ah |
| No-Load Speed | 0-1450 RPM |
| Maximum Torque | 20 Nm |
| Number of Speeds | 2 |
| Chuck Capacity | 0.8-10 mm |
| Metal Drilling Capacity | 20 mm |
| Charger Voltage | 220-240V ~ 50/60Hz |
| Power Source | Battery Powered |
| Special Features | Variable Speed |
| Material | Metal |
| Item Weight | 3000 grams (3 kg) |
| Product Dimensions (L x W x H) | 10 x 20 x 37 cm |
10. Warranty and Support
10.1. Warranty Information
This product carries a manufacturer's warranty for 6 months from the date of purchase. You can contact the manufacturer/its agent for maintenance or Amazon for more details.
10.2. Customer Support
For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official TOTAL tools website.
