1. Introduction
This manual provides essential instructions for the safe and effective use, maintenance, and care of your VGR V-390 Professional Electric Shaver. Please read this manual thoroughly before first use and retain it for future reference.
2. Product Overview
The VGR V-390 is a compact, rechargeable electric shaver designed for face and beard care. It features a reciprocating blade system and a convenient pop-up trimmer.
Image 2.1: VGR V-390 Electric Shaver, including the device, USB charging cable, and cleaning brush.
Key Components:
- Protection Cap: Covers the shaving head when not in use, protecting the foil and blades.
- Close Cut Blade: The primary shaving mechanism for a smooth finish.
- Pop-up Trimmer: Integrated trimmer for detailing sideburns, mustaches, or longer hairs.
- USB Charging Port: For convenient recharging of the device.
Image 2.2: Detailed view of the VGR V-390's main features, including the protection cap, close-cut blade, pop-up trimmer, and USB charging port.
3. Charging the Device
Before initial use, fully charge the shaver. The VGR V-390 is equipped with a Lithium Ion battery for cordless operation.
Charging Instructions:
- Ensure the shaver is turned off.
- Connect the provided USB charging cable to the shaver's USB port.
- Plug the other end of the USB cable into a compatible USB power source (e.g., computer, laptop, USB wall adapter, power bank).
- A full charge typically takes approximately 8 hours.
- Once fully charged, the shaver provides approximately 45 minutes of cordless operation.
Image 3.1: Charging specifications, indicating an 8-hour charge time for 45 minutes of operation, and compatibility with various USB power sources.
Image 3.2: The shaver being charged via a laptop's USB port, demonstrating convenient charging options.
4. Setup
The VGR V-390 shaver is designed for immediate use after charging. No assembly is required.
- Initial Charge: Fully charge the device as described in Section 3 before its first use.
- Inspect: Before each use, visually inspect the shaving foil for any damage. Do not use the shaver if the foil is damaged, as this may cause injury.
5. Operating Instructions
The VGR V-390 is suitable for shaving facial hair and maintaining beards.
Using the Main Shaver:
- Remove the protection cap from the shaving head.
- Press the power button to turn on the shaver.
- Hold the shaver at a right angle (90 degrees) to your skin.
- Gently stretch your skin with your free hand and move the shaver against the direction of hair growth.
- Apply light pressure. Do not press too hard, as this can irritate the skin or damage the foil.
- After shaving, press the power button to turn off the shaver and replace the protection cap.
Image 5.1: A user demonstrating the application of the VGR V-390 shaver for facial hair removal.
Using the Pop-up Trimmer:
- Locate the slide button for the pop-up trimmer on the side of the shaver.
- Slide the button upwards to activate the trimmer.
- Use the trimmer for precise detailing of sideburns, shaping mustaches, or trimming longer hairs before shaving.
- After use, slide the button back down to retract the trimmer.
Image 5.2: Visual guide to the pop-up trimmer mechanism and overall dimensions of the shaver.
6. Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the lifespan of your shaver.
Cleaning the Shaving Head:
- Ensure the shaver is turned off and disconnected from the charging cable.
- Gently detach the shaving head from the shaver body. This design allows for easy cleaning.
- Use the provided cleaning brush to remove any accumulated hair from the foil and the inner blades.
- For a more thorough cleaning, the detachable head can be rinsed under running water. Ensure the shaver body does not get wet.
- Allow all parts to air dry completely before reattaching the shaving head to the shaver body.
Image 6.1: Illustration of the detachable head feature, facilitating easy cleaning and maintenance.
Image 6.2: Demonstrates the ease of cleaning the shaver head by rinsing it under water.
7. Troubleshooting
If you encounter issues with your VGR V-390 shaver, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Shaver does not turn on. | Battery is depleted. | Charge the shaver for 8 hours. |
| Reduced shaving performance. | Hair accumulation in the shaving head. | Clean the shaving head thoroughly as per Section 6. |
| Shaver pulls hair or causes irritation. | Foil or blades are dull or damaged. | Inspect the foil for damage. If damaged, discontinue use and consider replacing the shaving head. Ensure proper shaving technique (Section 5). |
| Charging indicator not working. | Faulty charging cable or power source. | Try a different USB cable or power source. |
8. Specifications
- Model: VGR - V390
- Dimensions (LxWxH): 7 x 4 x 13 cm
- Item Weight: 190 g
- Power Source: Battery Powered (Rechargeable)
- Battery Type: Lithium Ion
- Charge Time: Approximately 8 hours
- Battery Life: Approximately 45 minutes
- Blade Material: Stainless Steel
- Special Features: Cordless, Pop-up Trimmer, Detachable Head for Cleaning
- Included Components: Shaver, USB Charging Cable, Cleaning Brush
9. Warranty and Support
The VGR V-390 Professional Electric Shaver comes with a 12-month quality warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets quality standards.
If you experience any issues with your product or are not satisfied, please contact VGR customer service. Our support team aims to respond within 24 hours to provide assistance and a satisfactory resolution.
For warranty claims or support, please refer to the contact information provided with your purchase documentation or visit the official VGR website.
