1. Introduction
Thank you for choosing the VeGue VW-022N Dual UHF Wireless Microphone System. This system is engineered to provide stable signal transmission and high-definition sound quality for various applications, including home karaoke, parties, meetings, church events, and public speaking. This manual will guide you through the setup, operation, and maintenance of your new wireless microphone system.
2. Package Contents
Please inspect the package contents to ensure all items are present and in good condition:
- 2 x Handheld Microphones
- 1 x Wireless Receiver Unit
- 2 x Anti-slip Rings
- 2 x Microphone Foam Covers
- 1 x 6.35mm Audio Cable
- 1 x Power Adapter (Charging Cable)
- 1 x User Manual
Figure 2.1: Complete package contents of the VeGue VW-022N system.
3. Product Overview
3.1. Receiver Unit
Figure 3.1: Front and rear view of the receiver unit with labeled components.
- Power Button: Turns the receiver on or off.
- LCD Display: Shows channel, frequency, and signal strength for both microphones.
- Mic-A Vol Control: Adjusts the output volume for Microphone A.
- Mic-B Vol Control: Adjusts the output volume for Microphone B.
- XLR Output: Balanced audio outputs for professional connections (XLR-A, XLR-B).
- 1/4" (6.35mm) Output: Unbalanced audio output for mixed signal.
- Antenna Connectors (ANT-A, ANT-B): For connecting the included antennas to ensure stable signal reception.
- Power Input: Connects to the provided power adapter.
3.2. Handheld Microphones
Figure 3.2: Handheld microphone with labeled components.
- Microphone Head Section: Captures audio.
- Display Screen: Shows battery level and current channel/frequency.
- Switch Button: Powers the microphone on or off.
- Frequency Adjust Button: Allows manual adjustment of the microphone's operating frequency (located inside the battery compartment).
4. Setup Instructions
Follow these steps to set up your VeGue wireless microphone system:
- Connect the Receiver:
- Attach the two antennas to the ANT-A and ANT-B connectors on the rear of the receiver.
- Connect the power adapter to the DC 12V IN port on the receiver and plug it into a power outlet.
- Connect the receiver's audio output to your audio amplifier, mixer, or PA system using either the 6.35mm audio cable (for mixed output) or XLR cables (not included, for individual microphone outputs). Ensure the receiver is connected to an appropriate audio input on your sound system.
- Insert Batteries into Microphones:
- Unscrew the bottom part of each handheld microphone to access the battery compartment.
- Insert two AA batteries (not included) into each microphone, observing the correct polarity (+/-).
- Screw the bottom part back on securely.
- Power On and Automatic Pairing:
- Press the power button on the receiver to turn it on. The LCD display will illuminate.
- Press the switch button on each handheld microphone to turn them on.
- The microphones will automatically pair with the receiver. The receiver's display will show the corresponding channel and frequency for each microphone, and the microphone displays will also show their active channel.
- Optimal Boot and Shutdown Order:
To prevent unexpected noise or damage to your audio equipment, follow these recommended power sequences:
- Boot Order: TV → Audio Amplifier → Speaker → Receiver → Microphone
- Shutdown Order: Microphone → Receiver → Speaker → Audio Amplifier → TV
5. Operating Instructions
5.1. Basic Operation
- Power On/Off: Use the respective power buttons on the receiver and microphones.
- Volume Adjustment: Use the 'Mic-A Vol Control' and 'Mic-B Vol Control' knobs on the receiver to adjust the individual output volume of each microphone.
- Microphone Usage: Hold the microphone approximately 2-6 inches from your mouth for optimal sound pickup. Avoid covering the microphone head with your hand.
5.2. Changing Frequencies (If Interference Occurs)
The system offers 15 adjustable frequencies to avoid interference. If you experience signal drops or interference:
- Turn off the affected microphone.
- Unscrew the bottom part of the microphone to reveal the frequency adjust button.
- Press the frequency adjust button briefly to cycle through available frequencies. Observe the microphone's display for the new channel.
- Turn the microphone back on. It should automatically pair with the receiver on the new frequency.
- Repeat for the other microphone if necessary, ensuring both microphones operate on different, clear channels.
6. Connection Diagrams
6.1. Connecting to TV through Amplifier with 6.35mm Mic Port
Figure 6.1: Diagram for connecting the receiver to an audio amplifier with a 6.35mm mic input, then to a TV and home speaker.
Note: The receiver needs to be connected to professional audio equipment. Ensure you insert the 6.35mm cable plug into the "MIC" input port on the amplifier.
6.2. Connecting Audio Devices with XLR Port
Figure 6.2: Diagram for connecting the receiver to an audio mixer and amplifier using XLR cables (not included).
6.3. Multi-Device Connection Support
Figure 6.3: The system supports connection to various devices including karaoke machines, PA systems, mixers, and amplifiers.
7. Maintenance
Proper maintenance ensures the longevity and optimal performance of your microphone system:
- Cleaning: Use a soft, dry cloth to clean the receiver and microphones. Avoid using liquid cleaners or solvents.
- Battery Care: Remove batteries from the microphones if they will not be used for an extended period to prevent leakage.
- Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the microphones or receiver, as this can cause internal damage.
8. Troubleshooting
If you encounter issues with your VeGue wireless microphone system, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from microphones | Microphone or receiver not powered on; Low microphone battery; Incorrect audio cable connection; Receiver volume too low; Amplifier/mixer input not selected or volume too low. | Ensure all devices are powered on. Replace microphone batteries. Check all audio cable connections. Increase receiver volume. Verify amplifier/mixer settings. |
| Interference or static noise | Other wireless devices operating on the same frequency; Obstacles blocking signal; Distance too far from receiver. | Change the microphone's operating frequency (refer to Section 5.2). Reduce distance between microphone and receiver. Ensure clear line of sight. Avoid placing receiver near other electronic devices. |
| Microphone not pairing with receiver | Microphone or receiver not powered on; Batteries low; Frequency mismatch. | Ensure both are powered on. Replace batteries. Try manually changing the microphone's frequency to allow re-pairing. |
| Short wireless range | Antennas not properly connected or positioned; Environmental interference; Physical obstructions. | Ensure antennas are securely connected and oriented upwards. Minimize obstructions between microphones and receiver. |
9. Specifications
| Feature | Specification |
|---|---|
| Model Name | VW-022N |
| Connectivity Technology | UHF |
| Microphone Form Factor | Handheld |
| Material | Metal |
| Number of Channels | 15 |
| Audio Sensitivity | 105 Decibels |
| Signal-to-Noise Ratio | 105 dB |
| Power Source | Corded Electric (Receiver) |
| Item Weight | 3.65 pounds (System) |
| Package Dimensions | 11.54 x 8.03 x 4.76 inches |
| UPC | 798845803367 |
| Recommended Uses | Karaoke, Singing, Meetings, Public Speaking |
| Compatible Devices | Karaoke Machine, Amplifier, Mixer, PA System |
10. Warranty and Support
The VeGue VW-022N Dual UHF Wireless Microphone System comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact VeGue customer service through the retailer where you purchased the product or visit the official VeGue website for contact information.
