Introduction
Thank you for choosing the MERTTURM 80LED Motion Sensor Cabinet Light. This wireless, USB rechargeable light is designed to provide convenient and adjustable illumination for various indoor spaces. Please read this manual carefully before use to ensure proper installation and operation.
Package Contents
- 2 x MERTTURM 80LED Motion Sensor Cabinet Lights
- 2 x USB Charging Cables
- 2 x Adhesive Metal Strips for Installation
- User Manual
Product Features
- 80 LED Brightness: Provides strong, adjustable, and comfortable illumination.
- Motion Sensor: Automatically turns on when motion is detected within 3-8 meters (10-26 feet) and a 120° angle. Auto-off after 20 seconds of no movement.
- 3 Sensor Modes: Always ON, All-Day Motion Sensor, and Light & Motion Sensor (night-only motion detection).
- 3 Color Temperatures: Easily switch between White (6500K), Warm White (4200K), and Warm (3000K).
- Stepless Dimming: Adjust brightness from 0% to 100% to suit your needs.
- USB Rechargeable: Built-in 1800mAh battery, rechargeable via any USB-A port. Lasts up to one month on motion sensor mode after a full charge.
- Easy Installation: Magnetic attachment allows for quick installation and removal for charging.
- Versatile Use: Ideal for closets, cabinets, kitchens, hallways, garages, desks, and stairs.
Setup and Installation
Image: Two simple installation methods for the light.
Installation Methods:
- Adhesive Strip Method:
- Clean the desired surface thoroughly to ensure it is dry and free of dust.
- Peel off the protective film from one side of the adhesive strip and attach it to the metal strip.
- Peel off the protective film from the other side of the adhesive strip and firmly press the metal strip onto the clean surface.
- Attach the MERTTURM light magnetically to the installed metal strip.
- Direct Magnetic Adsorption:
- If your desired surface is made of iron or another magnetic material, you can directly attach the light to it using its built-in magnets.
Operating Instructions
Image: Overview of the control buttons (S1, S2) and sensor modes.
Image: Illustration of color temperature options and brightness adjustment.
Button Functions:
- Button S1 (Color & Brightness Control):
- Short Press S1: Cycles through 3 color temperatures: Warm (3000K), Warm White (4200K), and White (6500K).
- Long Press S1: Activates stepless dimming. Hold to adjust brightness from 0% to 100%. Release when desired brightness is reached.
- Button S2 (Power & Sensor Mode Control):
- Short Press S2: Turns the light ON or OFF.
- Long Press S2: Cycles through the 3 sensor modes:
- Always ON Mode: The light remains continuously on (no sensor).
- All-Day Motion Sensor Mode: The light activates with motion regardless of ambient light (indicated by a red light flash).
- Light & Motion Sensor Mode: The light activates with motion only in low-light conditions (indicated by a green light flash).
Motion Sensor Operation:
- The PIR motion sensor has a maximum detection angle of 120° and a range of 3-8 meters (10-26 feet).
- Once motion is detected, the light will turn on. If no further motion is detected within 20 seconds, the light will automatically turn off.
Charging Instructions
Image: The light's USB charging port and battery status indicators.
- The MERTTURM cabinet light is equipped with a built-in 1800mAh lithium-polymer battery.
- To charge, connect the provided USB charging cable to the light's charging port and to any standard USB-A power source (e.g., computer, power bank, car charger, USB wall adapter).
- A red indicator light will illuminate during charging.
- The indicator light will turn green when the battery is fully charged.
- A full charge can provide up to one month of use in motion sensor mode, depending on usage frequency.
Maintenance
- Clean the light's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the charging port is free from dust and debris to maintain efficient charging.
- Avoid exposing the light to extreme temperatures or high humidity.
- Regularly recharge the battery to prolong its lifespan, even if not in constant use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. Incorrect sensor mode. | Charge the light fully. Check the sensor mode (S2 button) and ensure it's set to 'Always ON' or a suitable motion sensor mode. |
| Motion sensor is not working. | Incorrect sensor mode. Obstruction of sensor. | Ensure the light is in 'All-Day Motion Sensor' or 'Light & Motion Sensor' mode. Clear any obstructions from the sensor lens. |
| Light turns off too quickly. | Standard operation. | The light is designed to turn off after 20 seconds of no detected motion. If continuous light is needed, switch to 'Always ON' mode. |
| Short battery life. | Frequent activation. Battery degradation over time. | Reduce frequency of activation by using 'Light & Motion Sensor' mode in areas with sufficient daytime light. Ensure the light is fully charged. Battery capacity may naturally decrease after extended use (e.g., 1 year or more). |
| Light is not charging. | Faulty cable or power source. Damaged charging port. | Try a different USB cable and power source. Inspect the charging port for any visible damage. If the issue persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | MERTTURM |
| Model Number | UCL001-080-2 |
| Product Dimensions (L x W x H) | 21.9 x 1.2 x 3.4 cm (8.6 x 0.5 x 1.3 inches) |
| Item Weight | 184 g (0.4 lbs) |
| Material | Iron |
| Number of Bulbs | 80 LED |
| Bulb Type | LED |
| Power Source | Battery Powered (1 Lithium-polymer battery included) |
| Battery Capacity | 1800mAh |
| Voltage | 5 Volts |
| Wattage | 5 Watts |
| Luminous Flux | 8000 Lumen |
| Color Temperature | 3000K / 4200K / 6500K (Adjustable) |
| Special Features | Dimmable, Motion Sensor |
| Switch Style | Tactile |
| Indoor/Outdoor Usage | Indoor |
| Spare Parts Availability | Information not available |
| Software Updates Guaranteed Until | Information not available |
Warranty and Support
The MERTTURM 80LED Motion Sensor Cabinet Light comes with a 120-day product warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or any questions regarding your product, please contact MERTTURM customer service through the retailer's platform or the official MERTTURM website. Please have your purchase details and model number (UCL001-080-2) ready when contacting support.