Acquaer Submersible Water Pump User Manual

Introduction and Overview

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Acquaer Submersible Water Pump. This high-efficiency utility pump features a 1/6 HP motor, capable of draining water up to 1760 Gallons Per Hour (29.3 gallons per minute) at 5 feet, and can lift water up to 29.5 feet vertically. It is designed for various applications including draining swimming pool covers, basements, pits, ponds, window wells, and rain barrels, as well as for irrigation, garden cleaning, and car washing.

Constructed from durable thermoplastic material, the pump offers excellent corrosion resistance. Its compact size and lightweight design, along with an ergonomic handle, ensure easy portability and storage. The pump operates quietly and stably, making it suitable for both household and outdoor use.

Figure 1: Acquaer Submersible Water Pump Model UTP017-1.

Product Features

• Powerful Motor: 1/6 HP motor with a maximum flow of 1750 GPH and a maximum lifting height of 29.5 ft.
• Durable Construction: Made of thermoplastic material for enhanced durability and corrosion resistance.
• Ergonomic Design: Features a unique ergonomic handle for easy portability and a compact, lightweight design for convenient storage.
• Detachable Inlet Screen: The bottom screen filters debris, protecting the pump from damage and allowing water removal down to 1/4 inch of the surface. It is easy to clean.
• Multiple Adapter Options: Comes with a 3/4" garden hose adapter and features a 1-1/4" NPT discharge for higher flow. Compatible with 5/8 inch diameter or larger garden hoses.
• Safety Features: Equipped with an oil-filled permanent split capacitor motor for high efficiency and long service life. A built-in automatic thermal overload protector prevents overheat damage. UL certified.
• Long Power Cord: Includes a 10-foot power cord for extended reach.

Figure 2: Key features and specifications of the Acquaer Submersible Utility Pump.

Figure 3: Labeled components including portable handle, thermoplastic body, sturdy base, and 10ft power cord.

Setup Instructions

1. Unpack the Pump: Carefully remove the pump and all accessories from the packaging. Inspect for any damage.
2. Attach Discharge Hose:
   • For standard garden hoses, attach the provided 3/4" garden hose adapter to the 1-1/4" NPT discharge port on the pump.
   • Connect your garden hose (5/8 inch diameter or larger recommended) to the adapter. Ensure a tight connection to prevent leaks.
   • For higher flow applications, connect a 1-1/4" NPT discharge hose directly to the pump's discharge port.
3. Position the Pump: Place the pump in the area to be drained. Ensure the pump is stable and upright. The detachable bottom screen should be facing downwards to filter debris.
4. Power Connection: Extend the 10-foot power cord to a suitable 115V power outlet. Ensure the outlet is grounded and protected by a Ground Fault Circuit Interrupter (GFCI) for safety.

Figure 4: Illustration of connecting the 3/4" garden hose adapter to the pump's discharge.

Figure 5: The removable inlet screen at the base of the pump, designed to filter debris.

Operating Instructions

The Acquaer Submersible Water Pump is designed for easy operation. Simply plug the pump into a power supply, and it will begin to operate automatically when the water level reaches approximately 2 inches. The pump will continue to drain water until the level is reduced to 1/4 inch from the surface, at which point it will automatically shut off to prevent dry running and motor damage.

1. Initial Placement: Place the pump directly into the water you wish to drain. Ensure the pump is fully submerged for optimal performance.
2. Power On: Plug the pump's power cord into a suitable 115V GFCI-protected electrical outlet. The pump will activate automatically once the water level is sufficient.
3. Monitoring: While the pump operates automatically, occasional monitoring is recommended to ensure efficient drainage and to check for any blockages.
4. Automatic Shut-off: The pump will automatically turn off when the water level drops to 1/4 inch, protecting the motor from damage.

Figure 6: Performance chart showing Max. Head (29.5ft) and Max. Flow (1750 GPH) capabilities.

Figure 7: Examples of wide applications for the pump, including swimming pools, irrigation, and car washing.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your Acquaer Submersible Water Pump.

1. Disconnect Power: Always unplug the pump from the power source before performing any maintenance or cleaning.
2. Clean Inlet Screen: The detachable bottom screen should be regularly inspected and cleaned to prevent debris buildup, which can reduce efficiency or damage the pump. Simply detach the screen and rinse off any accumulated leaves, dirt, or other particles.
3. Inspect Hoses and Connections: Periodically check the discharge hose and all connections for kinks, blockages, or leaks. Ensure all fittings are secure.
4. Storage: When not in use for extended periods, especially during freezing temperatures, drain all water from the pump and hoses. Store the pump in a dry, protected area to prevent damage from freezing or corrosion.

Troubleshooting

If your Acquaer Submersible Water Pump is not operating as expected, refer to the following common issues and solutions:

Specifications

Warranty and Support

The Acquaer Submersible Utility Pump comes with a 1-year warranty. For any concerns or assistance, please do not hesitate to contact our Service Team. We are committed to providing support within 24 hours.

For further assistance, please refer to the contact information provided with your product packaging or visit the official Acquaer website.