Introduction
This user manual provides essential information for the safe and efficient operation of your Addtam 10 Ft Power Strip Surge Protector. Please read this manual thoroughly before use and retain it for future reference.
Product Features
- 8-in-1 Power Strip: 5 AC outlets and 3 USB charging ports.
- Overload Protection: Automatic trip-off for over-voltage, over-current, overload, and short-circuiting.
- 900-Joule Surge Protection: Comprehensive protection for electronics from voltage fluctuations, surges, and spikes.
- High-Speed USB Charging: Each USB port delivers up to 5V/2.4A (total 5V/3.1A), auto-detecting devices for maximum charge speed.
- 10 Ft Braided Extension Cord: Thick, durable, and flexible 15A cord.
- Flat Plug Design: Angled flat plug for tight spaces, preventing outlet blockage.
- Wall Mountable: Convenient design for fixing the power strip in a desired location.
Safety Instructions
- Do not exceed the maximum load of 1875W (15A/125V).
- Do not use in wet or damp conditions.
- Do not disassemble or modify the device.
- Keep out of reach of children.
- Ensure the plug is fully inserted into the wall outlet.
- Avoid running the cord under carpets or in high-traffic areas where it could be damaged.
Setup
- Unpacking: Carefully remove the power strip from its packaging. Inspect for any signs of damage.
- Placement: Choose a dry, indoor location away from heat sources and direct sunlight. The 10-foot braided cord allows for flexible placement.
- Wall Mounting (Optional): If desired, use the integrated keyhole slots on the back of the power strip to mount it securely to a wall or desk. Ensure appropriate screws are used for the mounting surface.
Image: Back of the power strip with keyhole slots for wall mounting.
- Connecting to Power: Plug the flat-angled power cord into a standard 125V AC wall outlet. The "SURGE PROTECTED" LED indicator will illuminate green, confirming surge protection is active.
Image: The Addtam power strip, showcasing its design and flat plug.
Operating Instructions
- Powering On/Off: Use the master ON/OFF switch located on the power strip to control power to all connected devices.
Image: Detail of the power strip's main switch and surge protection indicator light.
- Connecting AC Devices: Plug your electronic devices into any of the 5 AC outlets. The widely spaced outlets accommodate larger power adapters without blocking adjacent ports.
Image: Power strip in use, demonstrating its multiple outlets and USB ports.
- Connecting USB Devices: Connect your USB-powered devices (e.g., smartphones, tablets) to the 3 USB-A charging ports. The smart charging technology will automatically detect your device and deliver the optimal charging speed up to 2.4A per port (3.1A total).
Image: Power strip charging various devices, highlighting its versatility.
- Overload Protection: In case of an electrical overload, the reliable overload switch will automatically trip off to protect your connected devices. If this occurs, unplug some devices, then reset the switch to restore power.
Maintenance
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Inspection: Periodically inspect the power cord and the power strip for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use immediately and contact customer support.
- Storage: When not in use for extended periods, store the power strip in a cool, dry place away from direct sunlight and moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to outlets/USB ports. | Power switch is OFF. Overload protection tripped. Wall outlet has no power. | Flip the ON/OFF switch to ON. Unplug some devices, then reset the overload switch. Check the wall outlet with another device or circuit breaker. |
| "SURGE PROTECTED" LED is off. | Surge protection has expired or failed. | The power strip may no longer provide surge protection. Replace the unit to ensure continued protection for your devices. |
| USB devices not charging or charging slowly. | Device not properly connected. USB cable is faulty. Device requires more power than available. | Ensure USB cable is fully inserted. Try a different USB cable. Some high-power devices may charge slower or require a dedicated charger. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | AD9110 |
| AC Outlets | 5 |
| USB Ports | 3 (USB-A) |
| USB Output | 5V/2.4A Max per port, 5V/3.1A Total |
| Voltage Rating | 125V AC |
| Current Rating | 15A |
| Power Rating | 1875W |
| Surge Protection | 900 Joules |
| Cord Length | 10 Ft |
| Dimensions | 12.2 x 1.7 x 1.5 inches |
| Weight | 1.17 pounds |
| Color | Black |
Warranty and Support
Addtam provides a 30-day return policy and a 12-month replacement warranty for this product. For any questions or support needs, please contact Addtam customer service. We aim to reply within 12 hours.
You can visit the official Addtam store on Amazon for more information: Addtam Store