Temank Solar Inverter 5000W User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your Temank Solar Inverter 5000W. Please read this manual thoroughly before installation and use, and keep it for future reference.

Figure 1: Temank Solar Inverter 5000W, a pure sine wave power inverter with built-in MPPT controller and AC charger.

2. Key Features

• 5000W Pure Sine Wave Inverter: Provides clean and stable power for various appliances.
• 80A MPPT Charge Controller: Maximizes solar power harvesting efficiency.
• 40A AC Charger: Enables charging from utility grid or generator.
• Wide PV Input Range: Supports 120-500Vdc, with a maximum PV input of 5500W.
• Battery Compatibility: Compatible with 48V Lead-Acid (sealed, AGM, Gel, Flooded) and Lithium batteries.
• Multiple Charging Modes: PV priority, Utility Priority, Hybrid Charging, and Only Solar Charging.
• LCD Display: Dynamic display of system data and operating status with 3 LED indicators.
• Intelligent Cooling: Variable speed fan for efficient heat dissipation.

Figure 2: Overview of the 5000W Off-Grid Solar Inverter's key specifications and capabilities.

Figure 3: Illustration of the four charging modes and three load output working modes available on the inverter.

3. Setup and Installation

3.1 Safety Precautions

• Ensure all power sources are disconnected before installation.
• Installation should be performed by qualified personnel.
• Wear appropriate personal protective equipment (PPE).
• Ensure proper grounding of the inverter.

3.2 Wiring Diagram

Refer to the following diagram for correct wiring connections. Ensure all connections are secure and properly insulated.

Figure 4: Detailed wiring diagram showing connections for solar panels, battery, AC input (utility/generator), and AC output.

Note: The diagram is for reference only. Actual wiring methods may vary based on your specific setup and local regulations. Always connect the PE protective conductor (ground wire) first.

3.3 Installation Video Guide

For a visual guide on the installation process, please refer to the official installation video:

4. Operating Instructions

4.1 LCD Display and Buttons

The inverter features an LCD display and three LED indicators for dynamic display of system data and operating status. Use the buttons below the display to navigate and make settings.

Figure 5: The inverter's LCD display and control buttons, with an optional Wi-Fi/GPRS module for remote monitoring via the SmartESS App.

For detailed parameter settings, refer to the "Setting Parameter Steps" video:

5. Maintenance

• Regularly inspect all wiring connections for tightness and corrosion.
• Keep the inverter clean and free from dust and debris to ensure proper ventilation.
• Ensure the intelligent variable speed fan is operating correctly.
• Monitor battery health and voltage levels as per battery manufacturer guidelines.

6. Troubleshooting

If the inverter displays a fault code or exhibits abnormal behavior, refer to the troubleshooting guide below. For common fault codes and their meanings, consult the official troubleshooting video:

Common Issues:

• No Power Output: Check battery connections, solar panel input, and AC input. Ensure the inverter is turned on.
• Overload Alarm: Reduce the connected load. The inverter supports up to 5000W.
• Battery Not Charging: Verify solar panel voltage and current. Check AC input if charging from grid/generator. Ensure battery type settings are correct.
• High Temperature Alarm: Ensure adequate ventilation around the inverter. Clean any dust from the fan and vents.

7. Technical Specifications

8. Warranty Information

The Temank Solar Inverter 5000W comes with the following warranty:

• Free Replacement: Within 30 days of purchase.
• Free Repair and Parts Replacement: Within 1 year of purchase. Shipping costs incurred for repairs/replacements need to be borne by the customer.

For warranty claims, please contact Temank customer support.

9. Support and Resources

For additional support and detailed documentation, please refer to the following resources:

• Troubleshooting Guide (PDF)
• User Guide (PDF)
• User Manual (PDF)

You can also visit the official Temank Store on Amazon for more product information and assistance.