PDEEY USB-WATERPIK-CABLE

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

PDEEY USB Charging Cable for Water Flossers (FC159, FC156, FC256, FC259) - Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your PDEEY USB Charging Cable. This cable is designed as a replacement charger for various water flosser models, ensuring convenient and reliable power delivery.

PDEEY USB Charging Cable with USB-A and 2-prong figure-8 connectors

Image 1.1: The PDEEY USB Charging Cable, featuring a standard USB-A connector on one end and a 2-prong figure-8 connector on the other.

2. Compatibility

This USB charging cable is compatible with a range of water flosser models. Please verify your water flosser model against the list below to ensure proper fit and function.

  • Nicefeel Water Flosser models: FC159, FC1591, FC156, FC256, FC259
  • Fairywill Water Flosser
  • Tovendor Water Flosser
  • Yafex Water Flosser
  • Hangsun Water Flosser
  • Mospro Water Flosser
  • Cremax Water Flosser
  • Zerhunt Water Flosser
Diagram showing compatibility of the USB charging cable with various water flosser brands including Tovendor, Yafex, Hangsun, Nicefeel, and Fairywill.

Image 2.1: Visual representation of the charging cable's compatibility with several popular water flosser brands.

3. Setup

To set up your PDEEY USB Charging Cable for use, follow these steps:

  1. Identify the Connectors: The cable has a standard USB-A connector on one end and a 2-prong figure-8 connector on the other.
  2. Connect to Power Source: Insert the USB-A end of the cable into a compatible USB power source. This can be a power bank, car charger, AC adapter (wall charger), laptop, or PC. Ensure the power source provides adequate power for charging.
  3. Connect to Water Flosser: Insert the 2-prong figure-8 connector into the charging port of your water flosser. Ensure a secure and snug fit.
Close-up view of the USB-A and 2-prong figure-8 connectors of the charging cable.

Image 3.1: Detail of the USB-A and 2-prong figure-8 connectors, highlighting their design for proper connection.

4. Operating Instructions

Once the cable is properly connected to both a power source and your water flosser, the charging process will begin automatically. Most water flossers indicate charging status via an LED light. Refer to your water flosser's specific manual for details on its charging indicator.

  • Charging Time: Charging time will vary depending on the water flosser model and the power output of your USB source.
  • Full Charge: Disconnect the cable once your water flosser indicates a full charge to preserve battery life.
A white water flosser connected to a charging cable, placed on a bathroom counter next to a sink.

Image 4.1: A water flosser actively charging in a typical bathroom setting, demonstrating practical use.

5. Maintenance

Proper care and maintenance will extend the life of your charging cable:

  • Cleaning: Wipe the cable with a dry, soft cloth if it becomes dirty. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable sharply, as this can damage the internal wires.
  • Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage to the connectors. Discontinue use if any damage is observed.

6. Troubleshooting

If your water flosser is not charging, consider the following:

  • Check Connections: Ensure both the USB-A end and the 2-prong connector are securely plugged into their respective ports.
  • Verify Power Source: Test the USB power source with another device to confirm it is functioning correctly. Try a different USB port or AC adapter.
  • Inspect Cable: Examine the charging cable for any visible damage, such as cuts, kinks, or bent pins. A damaged cable should not be used.
  • Water Flosser Issue: If the cable and power source are confirmed to be working, the issue might be with the water flosser's charging port or internal battery. Refer to your water flosser's manual or contact its manufacturer for support.

7. Specifications

FeatureDetail
Model NameUSB-WATERPIK-CABLE
BrandPDEEY
Connector TypeUSB 2.0 (Type-A), 2-Prong Figure-8
Cable TypeUSB
Compatible DevicesNicefeel, Fairywill, Tovendor, Yafex, Hangsun, Mospro, Cremax, Zerhunt Water Flossers (Specific models: FC159, FC1591, FC156, FC256, FC259)
Special FeaturePortable
Number of Items2 (as a 2-pack)
ColorWhite
Item Weight50 g
Package Dimensions20.5 x 6.1 x 2.01 cm
The white charging cable neatly coiled next to a black water flosser inside an open suitcase, demonstrating its portability.

Image 7.1: The compact design of the charging cable makes it ideal for travel and easy storage.

8. Support

For further assistance or inquiries regarding your PDEEY USB Charging Cable, please refer to the seller's contact information on the platform where the product was purchased. For issues related to your water flosser itself, please contact the water flosser manufacturer directly.

© 2024 PDEEY. All rights reserved.

This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.