ryuwanku 202109

Ryuwanku Matte Black Modern Waterfall Bathroom Sink Faucet (Model 202109) Instruction Manual

Model: 202109 | Brand: Ryuwanku

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ryuwanku Matte Black Modern Waterfall Bathroom Sink Faucet. Please read this manual thoroughly before installation and retain it for future reference.

Product Components

The following components are typically included with your faucet:

  • Waterfall Faucet Body (Matte Black)
  • Hot and Cold Water Supply Hoses (3/8-inch braided stainless steel)
  • Mounting Hardware (gasket, mounting nut, washers)
  • Deck Plate (for 3-hole installations)
  • Pop-Up Drain Assembly (Note: The drain is included, but its finish may vary and may not be matte black.)
Ryuwanku Matte Black Waterfall Faucet components

Figure 1: Main faucet body with attached water supply lines and mounting hardware.

Installation Instructions

Before beginning installation, ensure all necessary tools are available and the water supply is turned off. This faucet is suitable for both 1-hole and 3-hole sink installations.

Installation diagram for Ryuwanku faucet

Figure 2: Detailed diagram showing the installation steps for the faucet.

  1. Prepare the Faucet: Screw the short threaded rod of the mounting bolt into the hole at the bottom of the faucet. Ensure the short threaded end is facing upward and the long threaded end is facing downward.
  2. Install Faucet Body:
    • Place the rubber gasket (2) and metal washer (3) over the mounting rod.
    • If installing on a 3-hole sink, place the deck plate (4) over the sink holes first, ensuring it covers the two side holes.
    • Insert the faucet body through the main hole in the countertop.
  3. Secure the Faucet: From underneath the sink, slide the rubber gasket (2) and metal washer (3) over the threaded rod. Fasten the mounting nut (1) until the faucet is secure. Do not overtighten.
  4. Connect Water Supply Lines: Connect the hot and cold water supply hoses to the corresponding hot and cold water valves. Ensure a tight seal to prevent leaks.
  5. Install Pop-Up Drain: Assemble the pop-up drain according to its instructions and install it into the sink drain opening. Ensure all connections are sealed to prevent leaks.
  6. Test for Leaks: Turn on the water supply and check all connections for leaks. If any leaks are detected, tighten the connections as necessary.
Ryuwanku faucet suitable for 1-hole sink

Figure 3: Faucet installation on a 1-hole sink. Hole size: 1.26" - 1.67" minimum to maximum.

Ryuwanku faucet suitable for 3-hole sink

Figure 4: Faucet installation on a 3-hole sink using the deck plate. Maximum width: 6 inches. Hole size: 1.26" - 1.67" minimum to maximum.

Operating Instructions

The Ryuwanku Waterfall Bathroom Sink Faucet features a single-handle design for convenient control of water flow and temperature.

  • Water Flow: Lift the handle upward to turn on the water and increase flow. Push the handle downward to decrease flow and turn off the water.
  • Temperature Control: Move the handle to the left for hot water and to the right for cold water.
  • Waterfall Effect: The faucet is designed to produce a smooth, quiet waterfall stream. Adjust the handle to achieve your desired flow and temperature.

Maintenance

Regular cleaning and proper care will help maintain the appearance and functionality of your faucet.

  • Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the matte black finish.
  • Finish Protection: The matte black finish is designed for superior rust and corrosion resistance. Gentle cleaning will help preserve its appearance.
  • Drain Maintenance: The pop-up drain features a detachable anti-clogging strainer. Periodically remove and clean the strainer to prevent blockages and ensure proper drainage.
Ryuwanku faucet with layers of material showing durability

Figure 5: Illustration of the faucet's premium SUS304 stainless steel construction with 5-layer polishing process for durability and easy cleaning.

Ryuwanku pop-up drain with detachable anti-clogging strainer

Figure 6: The pop-up drain features a detachable anti-clogging strainer for easy maintenance.

Troubleshooting

If you encounter any issues with your faucet, refer to the following common solutions:

  • Low Water Flow: Check if the water supply valves are fully open. Inspect the aerator for any debris or mineral buildup and clean if necessary.
  • Leaks: Ensure all connections, especially the water supply lines and mounting nuts, are securely tightened. Check the gaskets for proper seating and damage.
  • Noise during Operation: Some waterfall faucets may produce a slight sound, especially at lower flow rates. Ensure the water flow is not excessively restricted. If the noise is excessive, verify proper installation of internal components.

Specifications

Feature Detail
Brand Ryuwanku
Model Name 202109
Color Matte Black
Material SUS 304 Stainless Steel
Finish Type Matt
Mounting Type Protruding, Single Hole
Number of Handles 1
Spout Design Waterfall
Spout Height 4.3 Inches
Maximum Flow Rate 1.18 Gallons Per Minute
Item Weight 2.6 Pounds
Product Dimensions 1.69 x 1.69 x 5.12 inches

Warranty and Support

Ryuwanku offers a 100% satisfaction guarantee and provides replacement service within 12 months for any reason or problem after purchase. For support or warranty claims, please contact Ryuwanku customer service.

© 2025 Ryuwanku. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.