Philips Avent Natural Baby Bottles with Natural Response Nipple (SCY903/24) - Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective use of your Philips Avent Natural Baby Bottles with Natural Response Nipples. These bottles are designed to support your baby's natural drinking rhythm, mimicking breastfeeding by releasing milk only when your baby actively drinks.

2. Key Features

• Natural Response Nipple: Unique opening and tip release milk only when baby actively drinks, allowing baby to control the pace.
• Breast-Shaped Nipple: Wide, soft, and flexible nipple mimics the shape and feel of a breast for easy latching and comfortable feeding.
• No-Drip Design: Prevents milk loss from the tip when not actively feeding.
• Anti-Colic Valve: Integrated into the nipple to reduce colic and discomfort by directing air away from the baby's tummy.
• Ergonomic Design: Comfortable for parents to hold and easy for small fingers to grasp.
• BPA-Free Material: Made from polypropylene.
• Easy to Clean: Simple assembly with few parts and a wide bottleneck makes filling and cleaning easy.

3. What's in the Box

The package includes:

• 4x 9oz Natural bottles (Blue)
• 4x Medium Flow Natural Response nipples (Flow 3)

4. Setup and Assembly

Before first use, disassemble all parts and clean them thoroughly. Sterilize all components according to the cleaning instructions.

4.1 Assembling the Bottle

1. Insert the nipple into the screw ring from below until it is pulled through completely.
2. Ensure the nipple is seated correctly and securely in the screw ring.
3. Screw the assembled nipple and screw ring onto the bottle.
4. Place the dome cap over the nipple to keep it clean during transport.

Figure 1: Disassembled bottle showing the bottle, screw ring, nipple, and dome cap.

Figure 2: Close-up view of the Natural Response Nipple, highlighting its unique design for controlled milk flow.

5. Operating Instructions

5.1 Filling the Bottle

Fill the bottle with the desired amount of breast milk or formula. The bottle features clear measurement markings in both US fluid ounces and milliliters for accurate feeding tracking.

Figure 3: Philips Avent Natural Baby Bottle filled with milk, showing clear measurement markings on the side.

5.2 Feeding Your Baby

• Ensure the nipple is securely attached to the bottle.
• Present the nipple to your baby. The Natural Response Nipple is designed to only release milk when your baby actively sucks, similar to breastfeeding.
• Observe your baby's feeding rhythm. When your baby pauses to swallow and breathe, the milk flow will stop, preventing gulping and discomfort.

Figure 4: A baby feeding from the Philips Avent Natural Baby Bottle, demonstrating the natural latch and feeding position.

5.3 Nipple Flow Rates

Philips Avent Natural Response nipples are available in various flow rates to accommodate your baby's growth and feeding preferences. The bottles included in this pack come with Medium Flow nipples (Flow 3).

Figure 5: Visual guide to Philips Avent Natural Response Nipple flow rates, from extra slow to extra fast, indicating suitability for different ages.

6. Cleaning and Maintenance

Proper cleaning and sterilization are crucial for your baby's health.

6.1 Cleaning

• Disassemble all bottle parts (bottle, screw ring, nipple, dome cap).
• Wash all components thoroughly with warm, soapy water. Use a bottle brush for the bottle and a small nipple brush for the nipple to ensure all milk residue is removed.
• Rinse all parts thoroughly with clean water.
• The bottles are dishwasher safe. Place all components on the top rack of your dishwasher for cleaning.

6.2 Sterilization

After cleaning, sterilize all parts using one of the following methods:

• Boiling: Place all parts in a pot of boiling water for 5 minutes. Ensure all parts are fully submerged and do not touch the sides of the pot to prevent damage.
• Steam Sterilizer: Use a Philips Avent steam sterilizer or another suitable sterilizer according to its instructions.
• Microwave Sterilizer: Use a microwave sterilizer according to its instructions.

Allow parts to cool before handling. Store assembled bottles in a clean, dry place.

7. Troubleshooting

7.1 Baby struggling with milk flow

• It is natural for your baby to take 2-3 tries to get milk flowing from a new bottle or nipple.
• If your baby seems frustrated or is playing with the nipple instead of drinking, consider trying a higher nipple flow rate.
• If milk is leaking from your baby's mouth or your baby is gulping, consider trying a lower nipple flow rate.

8. Specifications

9. Warranty and Support

For specific warranty information and customer support, please refer to the documentation included with your product or visit the official Philips Avent website. Return policies may vary based on the retailer.